Urology Instrument Sets Manufactured in Our Own Factory
Urology departments, private hospitals, teaching units and specialist distributors use this category for open prostatectomy, cystolithotomy, pyelolithotomy, nephrectomy, urethral dilatation, catheter introduction and scrotal and circumcision work. Because pelvic and retroperitoneal access is deep and narrow, a urology instrument set relies on longer shanks, angled tips and deeper retractor blades than a general tray. All forging, grinding, curving and hand fitting is done at our own works, which lets us hold the smooth graded curve on sounds and dilators and keep the ratchet and jaw action even along a long instrument.
Urethral sounds and dilators are supplied in graded French size runs so a full ladder is available in one case. Retractors come with fixed or detachable blades in several depths for deep pelvic exposure. Stone forceps are made in straight and curved forms with fenestrated jaws. Instruments are reusable and autoclavable at 134 degrees C, and the complete set is presented in an aluminium sterilisation box with a silicone mat or fitted rack.
Popular Products in Urology Instrument Sets
Choosing the Right Urology Instrument Sets
Specifying a sound and dilator range
Sounds and dilators only work as a graded ladder, so ordering a partial run leaves gaps that force a jump in size. Decide the smallest and largest French sizes your unit needs and take every step between them. Adult urethral dilatation typically calls for a wide run, while a paediatric or day case list needs fewer, smaller steps. A fitted rack in the case keeps them in order and prevents bent shafts.
Exposure in the deep pelvis
Depth rather than width usually limits pelvic access. Millin and Judd Masson patterns hold the bladder and prostatic bed with blades long enough to stay seated, and detachable blade designs let one frame cover several body habitus ranges. Add a self retaining retractor if your procedures run long and assistants are scarce. Confirm blade depths against the patient population you treat rather than accepting standard sizes.
Care of long slender urology instruments
Sounds, dilators and long forceps bend if stored loose or stacked under heavier trays. Lay them flat in a fitted rack or a silicone mat and never let a heavy retractor sit across them. Clean hinged instruments in the open position, ultrasonic the jaws, then autoclave at 134 degrees C and dry fully. Check each sound for straightness and surface smoothness before packing, because a marked shaft can injure the urethra.
Why Buy Urology Instrument Sets from ADAS Instruments
- Source manufacture. Sets are built on our own benches, so you avoid every reseller markup.
- Compliance held. Production runs to ISO 13485 and the range is supplied CE marked.
- Surgical alloy. German surgical grade stainless steel, hand polished on every working surface.
- Brand supply. Distributor logos, part numbers and packaging applied at low minimum quantities.
- Bespoke lengths. Unusual shank lengths, blade depths and curves produced from your drawing.
- Reliable delivery. DHL and FedEx typically land in the USA, UK, Europe, Australia and the Gulf within 3 to 5 working days.
Frequently Asked Questions
What should a basic open urology tray include?
Begin with a graded run of urethral sounds and dilators, catheter introducing forceps, one pair of deep bladder retractors, stone forceps in straight and curved forms, long needle holders and long tissue forceps, plus scissors and clamps sized for pelvic depth. Add prostatic forceps if open prostatectomy is on your list. We will refine the contents against the procedures your unit actually performs.
Which French sizes are supplied for urethral sounds?
Sounds and dilators are made across a graded French range so a complete ladder is available without size gaps. State the smallest and largest sizes your department requires and whether adult, paediatric or both are needed, and we will build the run accordingly. Supplying them in a fitted rack inside the sterilisation case keeps sequence intact and protects the shafts from bending.
Are these instruments suitable for repeated autoclaving?
Yes. Every item is a reusable instrument rated for steam sterilisation at 134 degrees C. Sets arrive non sterile for processing in your own department. Long slender pieces need care in handling more than in sterilisation, so store them supported and flat, clean hinged instruments open, and dry thoroughly so no moisture is trapped in box locks or fenestrated jaws.
Can a urology set be built for a hospital tender?
Yes. Hospital tender, wholesale and distributor enquiries are welcome, and we quote line by line against a schedule so each instrument, size and quantity is priced clearly. Custom manufacture from a drawing, photograph or physical sample is available where a tender names a pattern we do not hold. OEM branding and packaging can be included at low minimum quantities.
Request a Quote or a Custom Instrument
Tell us the pattern, size and finish you need and we will send a factory price list the same working day. Email adas.surgical@gmail.com. Wholesale, distributor and hospital tender enquiries are welcome.