Liposuction Cannula Set Manufactured in Our Own Factory
Plastic surgeons, aesthetic clinics, theatre managers and surgical distributors order these cannulas for tumescent liposuction, high definition sculpture, fat harvesting and structural grafting. The range spans blunt tip aspiration shafts, single port and multiport designs, flat and round tip geometries, harvesting cannulas for autologous fat transfer and fine injection cannulas for reinjection. Everything is produced under one roof. Tube and bar stock are cut, ground, joined and hand fitted by craftsmen who work only on cannula lines, then each finished instrument is checked for hub concentricity, lumen clearance and tip smoothness before it is packed.
Shaft diameters are commonly supplied from 2 mm to 6 mm with working lengths from 15 cm to 30 cm, and larger bores are made to order. Handle options include Luer lock, threaded and one-piece ergonomic grips. Every item is reusable and fully autoclavable at 134 degrees C. A liposuction cannula set arrives in an aluminium sterilisation box with a silicone mat or fitted tray, and the contents list follows the surgeon’s preference card.
Popular Products in Liposuction Cannula Set
Choosing the Right Liposuction Cannula Set
Choosing cannula diameters for the set
Most contouring trays carry a graded ladder rather than one favourite gauge. A practical build starts with a 3 mm or 4 mm shaft for superficial refinement, a 4 mm or 5 mm shaft for bulk aspiration across the flanks and abdomen, and a finer 2 mm to 3 mm option for the neck, arms and submental region. Tell us which areas you treat most often and we will propose diameters and lengths that cover them without duplication.
Matching tip pattern to the tissue plane
Tip geometry decides how aggressively a cannula cuts. Mercedes and triport tips move volume quickly through fibrous deposits, spatula and flat tips give controlled superficial work close to the dermis, and basket or accelerator patterns suit dense glandular tissue. Blunt single hole and fan tips are usually reserved for harvesting, where adipocyte integrity matters more than speed. Mixing two or three patterns across one set covers most case types without over specifying.
Cleaning and care of long lumen instruments
Lumen instruments need flushing before the blood load dries. Rinse each shaft with cool water immediately after use, pass a soft brush of the correct diameter along the full length, then run an enzymatic soak and an ultrasonic cycle before autoclaving at 134 degrees C. Store dry with tips seated in the silicone mat. Inspect the hub thread and tip edge at every reprocessing cycle, because a burred aperture drags tissue and should be returned for refinishing.
Why Buy Liposuction Cannula Set from ADAS Instruments
- Factory pricing. You buy from the workshop that grinds the shaft, not from a reseller.
- ISO 13485 and CE. Every batch is produced under a certified quality system and CE marked.
- German steel. Shafts use German surgical grade stainless, with anodised aluminium on selected handles.
- OEM branding. Your logo, catalogue codes and packaging are applied at low minimum quantities.
- Built from samples. Send a drawing, photograph or worn cannula and we reproduce the geometry.
- Fast dispatch. DHL and FedEx reach the USA, UK, Europe, Australia and the Gulf in 3 to 5 working days.
Frequently Asked Questions
What sizes should a first liposuction cannula set include?
A workable starting tray usually holds three or four shaft diameters between 3 mm and 5 mm in two working lengths, plus one fine shaft for the neck and arms. Add a matching harvesting cannula if you also perform fat grafting. Tell us the regions you treat and the aspirator you run, and we will propose a contents list before quoting.
Are ADAS liposuction cannulas reusable?
Yes. Each cannula is a reusable instrument made from German surgical grade stainless steel and is fully autoclavable at 134 degrees C. Items are supplied non sterile, so your theatre reprocesses them before first use. With correct lumen brushing and thorough drying, a shaft holds its tip geometry over many cycles, and worn cannulas can be returned to the factory for refinishing.
Can you build a liposuction cannula set to my preference card?
Yes. Send your preference card, a photograph of an existing tray or a written contents list, and we will build the set to match on diameters, lengths, tip patterns and handle type. The finished set is laid out in an aluminium sterilisation box with a silicone mat. Private label marking, your own catalogue codes and printed packaging are available at low minimum quantities.
How do handles attach and can I change them later?
Handles are supplied in Luer lock, threaded and one-piece forms. Threaded and Luer patterns let a single handle drive several shafts, which keeps the set compact and lowers cost per tip. One-piece cannulas give the most rigid feel for heavy work. State the aspiration tubing and connector you already use and we will match the hub to your existing suction line.
Request a Quote or a Custom Instrument
Tell us the pattern, size and finish you need and we will send a factory price list the same working day. Email adas.surgical@gmail.com. Wholesale, distributor and hospital tender enquiries are welcome.