Fat Injection Cannula Manufactured in Our Own Factory
Buyers include aesthetic and reconstructive surgeons running structural fat grafting lists, body contouring clinics, dermatology practices offering facial volumization, and the dealers who supply them. The range pairs harvesting and infiltration patterns with the finer sizes needed for placement, so a full grafting tray can be assembled from one source. Tube is cut to length, the tip is formed and closed, ports are milled, and the internal edge of every port is deburred by hand so the lumen stays smooth. Hubs are turned on our own lathes, laser marked with gauge and length, and each cannula is flow tested before final polishing.
Typical outside diameters run from 0.7 mm to 3 mm, roughly 22 gauge down to 11 gauge, in working lengths from 5 cm to 25 cm. Ports may be single, opposed, staggered in threes, or spread along the distal third depending on the parcel size wanted. Standard fittings are Luer lock, with threaded and quick-release options for handled systems. Cannulas are reusable, autoclavable at 134 degrees C and available as single pieces, matched pairs or complete grafting sets.
Popular Products in Fat Injection Cannula
Also available in this category: Luer Lock Handle, Super Handle For Luer Lock, Tonnard Superficial Injector Cannula.
Choosing the Right Fat Injection Cannula
Choosing Cannula Diameter for the Recipient Site
Diameter decides parcel size and therefore how the graft behaves. Periorbital, lip and fine facial work is usually done with 0.7 mm to 1.2 mm micro cannulas, roughly 22 to 18 gauge, placing small parcels that take well in thin tissue. Midface, temple and hand grafting sits comfortably at 1.2 mm to 2 mm. Breast and gluteal lipofilling moves volume faster through 2.5 mm to 3 mm cannulas with longer shafts.
Port Pattern and Parcel Size
A single distal side port lays a continuous ribbon and gives the most control per pass, which suits the face. Opposed or staggered ports deposit in more than one plane on withdrawal and speed up large volume cases. Spatula and fan tips help release fibrous planes as they place. Match port area to syringe size, since a large port on a small syringe makes fine metering difficult.
Luer Lock, Threaded and Handle Fittings
Luer lock is the default because it accepts standard syringes and locks positively under injection pressure. Threaded fittings suit handled systems where the cannula is driven from a grip rather than a syringe barrel, and they resist loosening during long passes. Quick-release seats save time when several tips are swapped in one case. Decide the fitting first, then build the set around it so every piece interchanges.
Why Buy Fat Injection Cannula from ADAS Instruments
- Factory gate cost. Cannulas are drawn, milled and polished under our roof, so you are not paying a distributor.
- Regulated manufacture. ISO 13485 certified production with CE marking on the grafting range.
- Smooth lumen. German surgical grade stainless shafts, hand deburred internally and mirror finished.
- Branded as yours. Laser marked logos, your own gauge and length codes, and packaging to your artwork.
- Bespoke tips. A drawing, photograph or worn sample is enough for us to reproduce or improve a tip design.
- Air freight worldwide. DHL and FedEx deliver to the USA, UK, Europe, Australia and the Gulf, generally in 3 to 5 working days.
Frequently Asked Questions
What cannula gauge is used for facial fat grafting?
Most facial work is done between 22 gauge and 18 gauge, roughly 0.7 mm to 1.2 mm outside diameter, with a blunt tip and a single distal side port. Finer sizes suit the eyelid, tear trough and lip where the skin is thin. Cheek, temple and jawline grafting is often placed through 1.2 mm to 2 mm cannulas to move volume in fewer passes.
Are your fat injection cannulas reusable?
Yes. Every cannula in this range is a reusable instrument made from solid stainless steel and fully autoclavable at 134 degrees C. Flush the lumen immediately after use before fat can dry inside, clean with a matching stylet or brush, then process in an ultrasonic bath. Inspect the tip and port edges under magnification at each cycle and retire any cannula that has become burred.
Do the cannulas fit standard syringes?
Standard Luer lock hubs are fitted as default, so the cannulas thread onto ordinary Luer lock syringes of any capacity commonly used for grafting. Threaded and quick-release fittings are offered where a handle system is preferred, and adapters are available to step between fitting types. Tell us which syringes and handles are already in your set and we will match the hub.
Can you manufacture a fat grafting cannula from our own sample?
Yes, that is one of our regular services. Send a physical sample, a dimensioned drawing or a clear photograph with the length, diameter and port layout noted, and we produce a sample piece for your approval. After sign off, batches run to your specification with your logo and catalog numbers marked. Minimum order quantities on custom patterns are deliberately low.
Request a Quote or a Custom Instrument
Tell us the pattern, size and finish you need and we will send a factory price list the same working day. Email adas.surgical@gmail.com. Wholesale, distributor and hospital tender enquiries are welcome.