A liposuction cannula for aspiration usually carries one to three openings, and three is the most common count: the Mercedes pattern sets them radially behind a blunt nose so extraction spreads evenly without track marks. Infiltration cannulas work the other way, with six to twelve fine side holes that spread tumescent fluid instead of removing fat. Adas Instruments makes three hole aspiration cannulas in 3 mm to 6 mm bores.
The direct answer: one to three openings for aspiration cannulas in most body work, with the three-port Mercedes as the world standard, and six to twelve fine side holes for infiltration cannulas, whose job is spreading fluid rather than extracting fat. The right count follows the job, and the reasoning is worth two minutes. Here it is in full.
Key takeaways
- Aspiration tips carry one to three openings; the three hole Mercedes is the default for body work.
- Every extra window splits the vacuum and adds a place to clog faster than it adds flow.
- Infiltration cannulas use six to twelve fine side holes because their job is spreading fluid.
- Choose the port count for each stage of the case, not by habit.

Aspiration: Why Three Won
Each opening added to an aspiration tip divides the vacuum among more windows and adds another grabbing edge. One port concentrates suction for precision and control; two balances; three, arranged radially behind a blunt nose, spreads extraction evenly enough to prevent track marks while still moving volume, the equilibrium that made the Mercedes pattern the default in our cannula types guide. Beyond three, each extra window costs vacuum per window and adds clog opportunities faster than it adds flow.
The Exceptions That Prove It
Single-port and dual-port tips rule the face and neck per the facial guide, precision over speed. Multi-window harvesting cannulas for fat transfer run five or more small ports deliberately: small parcels at low shear per window is what graft viability wants. And baskets break the rules with cutting windows because fibrous tissue demands it.
Infiltration: The Opposite Logic
Infiltration cannulas spray inward: many fine holes along the shaft fan tumescent solution evenly through the plane, six to twelve being typical per the tumescent guide. Counting holes tells you instantly which family a cannula belongs to, extraction counts low, irrigation counts high.
Shop three hole Mercedes cannulas direct from the maker
Adas Instruments makes the Mercedes cannula on a fixed handle in 3 mm to 6 mm bores and 20 cm to 45 cm lengths, standard or titanium nitride coated, from 55 dollars. Plain or laser marked with your brand.
What This Means at Ordering
Specify port count with diameter and length: a 4 mm three-port and a 4 mm single-port are different instruments for different stages. The hole geometry guide covers the deeper variables once count is settled.

How Many Holes Liposuction Cannula Tips Should Carry
Asking how many holes liposuction cannula tips need is really asking about total open area. Port count on its own tells you little; count multiplied by port size is what the surgeon feels at the handle.
| Port count | Typical use | Removal rate | Control |
|---|---|---|---|
| 1 distal port | Superficial refinement, fat injection | Lowest | Highest, fully directional |
| 2 ports | Neck, arms, fine contour | Low | Very good near the skin |
| 3 ports | General body work | Moderate | Good all round balance |
| 4 ports | Abdomen, flank debulking | High | Adequate in the deep layer |
| 5 to 6 ports | Large volume, dense areas | Highest | Least, deep layer only |
| Radial pattern | Deep debulking | High | Captures in every direction |
| Single face pattern | Anything near the dermis | Moderate | Ports can be aimed away from skin |

Common Mistakes When Choosing Port Count
Port count is a technique decision that gets treated as a catalogue detail. Five points matter.
- Assuming more is better. Six ports remove faster and forgive less, which is the wrong trade in a thin or superficial area.
- Ignoring port size. Two large ports can have more open area than five small ones, so compare area rather than count.
- Using radial tips superficially. A radial pattern always has one port facing the dermis, and that is where surface irregularity begins.
- Buying one pattern for everything. Debulking and finishing are different jobs, and one hole pattern cannot do both well.
- Not checking the rims. A burred port tears on the withdrawal stroke, and no port count fixes a damaged edge.
Specifying Port Count and Pattern on a Custom Order
Port count, port diameter, spacing and orientation are all specifiable on a made to order run, and naming them avoids receiving a supplier default. Cannulas are built in high quality medical grade stainless steel, in custom working lengths, with matched hub standards and OEM or white label marking for clinics and distributors. Production time on custom work is 10 to 15 working days, normally 15 working days depending on order size.
Repeatability across reorders is exactly the kind of dimensional consistency that standards bodies such as ISO exist to underpin, and it is why a second batch should feel like the first. When you place the order, keep the whole family together in one liposuction cannula set so port patterns step logically from coarse to fine.

Matching Port Count to Each Stage of the Case
In practice the answer to how many holes liposuction cannula work needs changes three times in a single case: many ports to open and debulk, fewer to even the layer, one distal port for anything close to the skin. Stock all three steps from the aspiration cannula range.
Infiltration cannulas are the opposite design problem, because there the goal is to spread fluid along a tunnel rather than capture tissue, so they carry many small ports. Those belong in the tumescent infiltration cannula range and should never be substituted for aspiration tips.
Specifying tips port by port? Every pattern listed with count, size and setback stated.
Frequently Asked Questions
How many holes does a Mercedes cannula have?
Three, arranged radially behind a closed blunt tip: the arrangement that made it the world’s default aspiration pattern for even, fast extraction.
Why do infiltration cannulas have so many holes?
Their job is even fluid distribution, not extraction: six to twelve fine side holes fan tumescent solution through the plane in one pass.
Is a single-hole cannula better for delicate areas?
Generally yes: one port concentrates control and removes fat gradually, exactly what faces, necks and finishing passes reward.
How many holes should a liposuction cannula have?
Two to four ports covers most body work, one distal port is used for superficial refinement and injection, and five or six ports are reserved for deep, dense debulking. The right count follows the stage of the case rather than surgeon preference alone.
Do more holes mean faster fat removal?
Usually yes, but the driver is total open area rather than count. Two large ports can move fat faster than five small ones, so compare the combined area of the openings when you are judging how aggressive a tip will feel.
Are single hole cannulas only for fat grafting?
No. A single distal port is also the safest choice for superficial contouring, because the surgeon can turn the opening away from the underside of the skin and remove a controlled amount with each pass.
Does port placement along the shaft matter?
Yes. Ports concentrated near the tip remove at the tip, while ports spread along the distal third capture along the whole tunnel. Spread patterns even out a layer; concentrated patterns give precision at the working end.
