What a Bauer retractor is
Bauer intra-oral retractors work at the top of the ramus, at the sigmoid notch, the dip in the bone between the two upward points of the lower jaw. In a sagittal split the cut on the inner side of the ramus starts just below that notch, and the masseter and the cheek have to be held off the bone while it is made. A Bauer retractor is made to sit there.
Google AI Mode, read on 3 November 2026, answers the query bauer retractor by calling it a hand held surgical tool for oral and maxillofacial surgery, under two more names: the Bauer intraoral retractor and the Bauer sigmoid notch retractor. It says it holds the masseter and the cheek back to expose the sigmoid notch and the ramus, in sagittal split surgery, reconstruction of the lower jaw and the correction of a jaw that sits too far forward, and it describes a slightly concave blade.
The answer for the lighted Bauer adds why there are two patterns: the shaft curves forward and carries a flange for the notch, so the instrument is not the same on both sides. Our listing sells it the same way, with a left and a right tip option. As an intraoral retractor it is, with its lighted twin, the only one in this family that is ordered by side.
Key design features
Left and right
The listing has two tip options, Left and Right, at the same 28 dollars. Gemini gives the reason: the Bauer is made to match the angle of the jaw on each side. A team that operates on both sides of the jaw in one case needs one of each.
Made for the sigmoid notch, as the AI describes it
AI Mode describes a slightly concave blade that follows the back edge of the ramus, and a flange that seats in the sigmoid notch. The notch gives the blade something to sit against, so it holds where it is placed while the surgeon works below it.
Twenty one centimeters
At 21 cm it reaches the top of the ramus from outside the lips, with the hand clear of the mouth. That leaves the front of the mouth for the saw, the bur and the suction, which all come in along the line of the cheek. The lighted Bauer on our site does not give a length on its listing, so if the two will share a tray, ask us and we will measure it for you.
Plain steel, no light
This version carries no light. It is the one to order where a headlight reaches the notch, and it costs 28 dollars against 55 for the Bauer with fiber optic. With nothing to connect, it goes through the normal steam cycle like any other steel retractor.
Which one to order
The Bauer retractors on our site, read on 3 November 2026. Each side is ordered as its own tip option.
| What you get | Side | Light | Price |
|---|---|---|---|
| Bauer intra oral retractor, 21 cm | Left | None, plain steel | 28 dollars |
| Bauer intra oral retractor, 21 cm | Right | None, plain steel | 28 dollars |
| Bauer intra-oral retractor with fiber optic | Left or right | Fiber optic light carrier | 55 dollars |
Where it is used
Gemini, read on 3 November 2026, places the 21 cm Bauer in oral and maxillofacial surgery and osteotomy of the lower jaw through the mouth, on the cheek mucosa, the masseter and the ramus.
| Case | What it holds | Why this blade |
|---|---|---|
| Sagittal split osteotomy | Masseter and cheek off the upper ramus | Seats at the sigmoid notch |
| Correction of a jaw set too far forward | Soft tissue over the ramus | Ordered for each side |
| Reconstruction of the lower jaw | The flap over the ramus | Holds where it is placed |
| Orthognathic surgery of both jaws | Cheek and masseter | One left and one right on the tray |
What it holds back, and what it must not do
It holds the masseter and the cheek off the upper ramus. It is not a lever, and it does not hold the cheek at the front of the mouth.
| Job | Use the Bauer? | What to use instead or beside it |
|---|---|---|
| Holding tissue off the ramus at the sigmoid notch | Yes | This is the job it is made for |
| One pattern for either side | Beside it | A Levasseur-Merrill retractor |
| Lighting the notch | Beside it | The Bauer with fiber optic |
| Holding the cheek and lip | No | A cheek retractor |
| Levering bone | Never | An elevator; the blade bends under that load |
How it compares with the rest of the family
Ten intra-oral and extra-oral retractors make up this family on our site, each pattern plain or with fiber optic. The light, the options, the lengths and the prices are read off each listing on 3 November 2026.
| Retractor | Light | Used | Options on the listing | Length | Price |
|---|---|---|---|---|---|
| Shea 18 cm | plain | inside the mouth and in ENT work | one size | 18 cm | 28 dollars |
| Shea with fiber optic 22 cm | fiber optic | inside the mouth and in ENT work | one size | 22 cm | 55 dollars |
| Petri pterygoid 23 cm | plain | behind the upper jaw, at the pterygoid plates | one size | 23 cm | 28 dollars |
| Petri pterygoid with fiber optic | fiber optic | behind the upper jaw, at the pterygoid plates | one size | not given on the listing | 55 dollars |
| Levasseur-Merrill with fiber optic 28 cm | fiber optic | on the ramus of the lower jaw | one size | 28 cm | 55 dollars |
| Levasseur-Merrill 25 cm | plain | on the ramus of the lower jaw | one size | 25 cm | 28 dollars |
| Bauer with fiber optic | fiber optic | at the sigmoid notch and the ramus | left or right | not given on the listing | 55 dollars |
| Bauer 21 cm (this page) | plain | at the sigmoid notch and the ramus | left or right | 21 cm | 28 dollars |
| Extra oral with fiber optic 25 cm | fiber optic | outside the mouth, head and neck | one size | 25 cm | 55 dollars |
| Extra oral 22 cm | plain | outside the mouth, head and neck | one size | 22 cm | 28 dollars |
Materials and finish
Every Bauer retractor we make is formed from high quality medical grade stainless steel. The steel itself is made to a German specification. We do not publish a grade number.
The finish is plain steel, with no coating and no light carrier on this version. Mark the left and the right on the tray, so the two sides are not swapped between cases.
Caring for it
Rinse it as soon as the case ends, before blood and bone dust dry on the blade. Brush both faces of the blade, the bend and the handle. Dry it, steam sterilize it on the normal instrument cycle, and look along the blade before it goes back on the tray. A blade that has been bent out of its curve will not seat at the notch, so set it aside rather than bend it back by hand.
Ordering and wholesale
The Bauer retractor is made by Adas Instruments in our own workshop and sold direct, which is why the price sits where it does against the catalog houses. Order one for a single tray, or in quantity for a hospital list or a distributor line. We do OEM work under your own brand and your own item numbers. Send us a sample and we will hold a run to your pattern rather than ours. Stock items ship from our own workshop. Backorder items take 10 to 12 working days to make. Every instrument carries a three year replacement warranty against manufacturing defects. Production is controlled under an ISO 13485 quality management system.
Frequently asked questions
What is a Bauer retractor used for?
It pulls back and holds the masseter and the cheek to expose the sigmoid notch and the ramus of the lower jaw. AI Mode names sagittal split osteotomy, reconstruction of the lower jaw and the correction of a jaw that sits too far forward. Ours is 21 cm.
Do I need a left and a right Bauer retractor?
For a case on both sides of the jaw, yes. The Bauer is made to match the angle of the jaw on each side, and our listing sells a Left and a Right tip option at 28 dollars each. For one side only, order that side.
Is a sigmoid notch retractor the same thing?
Yes. AI Mode gives the Bauer sigmoid notch retractor and the Bauer intraoral retractor as other names for it in its first sentence. The sigmoid notch is the dip at the top of the ramus where the blade seats.
How is the Bauer different from a Levasseur-Merrill retractor?
Gemini puts it in the sides. The Bauer is made in a left and a right pattern to match each side of the jaw, while the Levasseur-Merrill is one pattern for either side. Both hold the masseter off the ramus, and both are 28 dollars plain.
Can it be autoclaved?
Yes. The plain version is stainless steel with no light carrier, no coating and no insulation, and it goes through the normal steam cycle with the rest of the tray. Rinse it, brush the blade and the bend, and dry it before it is packed.
Related products and categories
Three more retractors from the same family: the extra oral retractor with fiber optic, 25 cm, the extra oral retractor, 22 cm and the Shea multi-purpose retractor, 18 cm. The rest of the range is under maxillofacial instruments, which sits inside our ENT instruments.



Reviews
There are no reviews yet.