What Baumgartner wire twisting pliers are
Baumgartner wire twisting pliers are the sternal wire twister of the tray. After a median sternotomy the breastbone is closed with a row of heavy stainless steel wires, each passed round or through the two halves. Every one of those wires has to be drawn tight and twisted so the two halves stay pressed together while they heal. Thick wire fights back, so the instrument needs a firm bite at the tip and enough length behind it to turn against that resistance.
Google AI Mode, read on 4 November 2026, describes Baumgartner sternal wire twisting forceps as heavy, needle holder style instruments for gripping, tensioning and twisting thick cerclage and sternal wires. It names closing the sternum after a median sternotomy, and lists orthopedic trauma and maxillofacial work beside it.
Gemini, read the same day, places them in cardiothoracic, trauma and orthopedic surgery on heavy sternal wires and thick cerclage. It lists the Baumgartner wire twister and sternal closure forceps as catalog names. Buyers also type sternal wire twister for the same instrument. A sternal closure takes a whole row of these wires, and the same forceps twists every one of them, so the jaws and the ratchet take the same heavy load again and again in a single case. That is the reason this pattern is built long and heavy rather than fine.
Key design features
Short jaws with a serrated face
The jaw drawing on our listing shows short jaws with a serrated gripping face. Short jaws on long handles put the force at the tip, which is what a heavy wire needs. The serrations stop the two wire ends sliding in the jaws as the twist tightens and the wire starts to pull back.
A hole near the tip
The same drawing shows a hole through the jaws near the tip, so that when the jaws close there is a small opening between the serrated faces just short of the point. We describe it from the drawing only, and we do not give it a size. Clean it with care after every case, because blood and bone dust settle in it first.
Twenty centimeters
The item code and the listing give the length as 20 cm, the longest wire forceps in this family. In an open chest the length keeps the hand above the wound edge and clear of the wires already twisted. It also gives a longer lever, so a thick sternal wire can be drawn tight with less effort from the wrist.
Long ring handles with a ratchet
Our photograph shows long ring handles with a ratchet between them. Lock the jaws on the wire ends and the hand can let go of the squeeze. Then turn the forceps with a steady upward pull until the halves of the breastbone meet and the twist lies down. Release the ratchet with a further squeeze on the rings.
Which one to order
This listing carries one size, read on 4 November 2026. The wire forceps on our site are set out below, so the tray carries the right length for the wire.
| What you get | Length | Working end | Price |
|---|---|---|---|
| Baumgartner sternal wire twisting forceps, this page | 20 cm | Short jaws with a hole and a serrated face | 20 dollars |
| Self-locking wire twisting forceps | 14, 15, 16 or 18 cm | Narrow jaws, ratchet that locks itself | 40 dollars each |
| Wire twisting forceps | 15 cm | Narrow jaws with a cross-hatched face | 28 dollars |
| Obwegeser wire loop forceps | 15 cm | Narrow grooved tips with a hole | 24 dollars |
Where it is used
AI Mode and Gemini, read on 4 November 2026, name these cases for the Baumgartner pattern.
| Case | What it twists | Why this one |
|---|---|---|
| Closing the breastbone after median sternotomy | Sternal wires | 20 cm reach over the open chest |
| Cerclage of a long bone fracture | Thick cerclage wire | Long handles give a long lever |
| Orthopedic trauma | Heavy fixation wire | Serrated jaws hold under tension |
| Heavy maxillofacial wiring | Thick interosseous wire | Short jaws put the force at the tip |
What it does, and what it must not do
The Baumgartner wire twisting pliers grip and twist heavy wire. They do not cut the wire, and they are too big for fine ligature work in the mouth.
| Job | Use the Baumgartner? | What to use instead or beside it |
|---|---|---|
| Twisting sternal wires shut | Yes | This is the job it is made for |
| Trimming the twisted ends | No | A heavy wire cutter |
| Fine ligature wires round the teeth | No | The self-locking wire twisting forceps, 14 or 15 cm |
| Forming small loops for jaw fixation | No | The Obwegeser wire loop forceps |
| Holding a needle or tissue | Never | A needle holder or a tissue forceps |
How it compares with the rest of the family
Seven wire, bone and scalp forceps make up this part of the maxillofacial range on our site. The working ends are read off each listing’s own photograph, the options off the variations, the lengths off the name and the item code, and the prices off the order form, on 4 November 2026.
| Forceps | Working end, from our photograph | Options on the listing | Length | Price |
|---|---|---|---|---|
| Wire twisting 15 cm | narrow jaws with a cross-hatched face, ring handles, ratchet | one size | 15 cm | 28 dollars |
| Self-locking wire twisting | narrow jaws, ring handles, ratchet that locks itself | 14, 15, 16 or 18 cm | 14 to 18 cm | 40 dollars each |
| Baumgartner sternal (this page) | short jaws with a hole and a serrated face, long ring handles, ratchet | one size | 20 cm | 20 dollars |
| Obwegeser wire loop | narrow grooved tips with a hole, ring handles, ratchet | one size | 15 cm | 24 dollars |
| Tessier bone contouring | angled jaws with serrated faces on heavy handles, no rings | one size | 22 cm | 46 dollars |
| Willet-Martel scalp | T-shaped cross-serrated plate jaws, ring handles, ratchet | one size | not given on the listing | 28 dollars |
| Dandy artery | curved jaws serrated along their length, ring handles, ratchet | curved or straight tip | 14 cm | 12.50 dollars |
Materials and finish
Every Baumgartner wire twisting pliers we make is formed from high quality medical grade stainless steel. The steel itself is made to a German specification. We do not publish a grade number.
The finish is plain steel. Heavy wire puts more load on the jaws than any other job in this family, so look at the serrations and the tip before each case. Flattened serrations let the wire creep under tension.
Caring for it
Rinse the Baumgartner wire twisting pliers as soon as the case ends, before blood dries in the joint, the serrations and the hole. Open the jaws, brush the jaw faces and push a soft brush through the hole, then brush the joint and the ratchet. Wash it with the joint open, dry it, oil the joint with instrument lubricant, and steam sterilize it on the normal cycle with the ratchet unlocked.
Ordering and wholesale
The Baumgartner wire twisting pliers is made by Adas Instruments in our own workshop and sold direct, which is why the price sits where it does against the catalog houses. Order one for a single tray, or in quantity for a hospital list or a distributor line. We do OEM work under your own brand and your own item numbers. Send us a sample and we will hold a run to your pattern rather than ours. Stock items ship from our own workshop. Backorder items take 10 to 12 working days to make. Every instrument carries a three year replacement warranty against manufacturing defects. Production is controlled under an ISO 13485 quality management system.
Frequently asked questions
What are Baumgartner wire twisting pliers used for?
They grip, tension and twist the heavy wires that close the breastbone after a median sternotomy. AI Mode also names orthopedic trauma and maxillofacial work with thick cerclage wire. Ours is the 20 cm sternal pattern, with long ring handles and a ratchet, at 20 dollars.
Are sternal closure forceps the same as a sternal wire twister?
Gemini gives sternal closure forceps as a catalog name for this pattern, and buyers type sternal wire twister for the same job. Both mean a long, heavy forceps that twists the wires holding the two halves of the breastbone together.
How is the Baumgartner different from the 15 cm wire twisting forceps?
Gemini puts it in the build. The Baumgartner has short jaws and long handles to turn thick sternal wire, while the 15 cm pattern has narrow jaws for fine wire and small fields. Ours are 20 and 28 dollars on the listing.
Does the Baumgartner cut the wire?
No. It is made to grip and twist. Trim the ends with a heavy wire cutter once each twist is tight, then bend the cut ends down against the bone so they do not catch on the tissue that closes over them. Keep the cutter and the twister on the same side of the tray, so each wire goes from one to the other without a reach across the field.
Can it be autoclaved?
Yes. The Baumgartner wire twisting pliers are stainless steel with no coating, and they go through the normal steam cycle with the rest of the tray. Brush through the hole in the jaws, oil the joint, and sterilize it with the ratchet unlocked.
Related products and categories
Three more forceps from the same tray: the Obwegeser wire loop forceps, the Tessier bone contouring forceps and the Willet-Martel scalp forceps. The rest of the range is under maxillofacial instruments, which sits inside our ENT instruments.


Reviews
There are no reviews yet.