What the Dingman zygoma elevator is
The Dingman zygoma elevator is the heavier of the two narrow zygoma elevators in our range. Where the Gillies is made for one route, down from the hairline under the fascia of the temple, the Dingman is used for direct work on the fallen bone, through a short cut in the skin over the cheek or from inside the mouth. Its curved tip is slid under the fragment and the bone is drawn back to its line.
Google AI Mode, read on 4 November 2026, describes the Dingman zygoma elevator as an instrument used in oral, maxillofacial and plastic surgery to manipulate, elevate and reduce fractures of the zygomatic bone and the zygomatic arch. In its words, the shaft and blade are slightly curved to match the contour of the side of the skull, which lets the tip follow the bone instead of digging into it.
Gemini, read the same day, places it in facial trauma and oral and maxillofacial surgery, on depressed zygomatic fragments and the arch. It lists the Dingman malar elevator, the dingman zygomatic reduction tool and the dingman zygoma elevator 21cm as catalog names, and describes a heavier shaft with an angled tip for work through the skin or the mouth. Buyers who do not know the name type zygomatic arch fracture elevator.
Key design features
A narrow shaft that curves at the tip
Our photograph shows a narrow shaft that runs straight from the handle and curves gently at the tip. The curve lets the end slide under a depressed fragment while the shaft stays clear of the face. Drawn back toward the surgeon, the tip lifts the bone it is under.
Direct work on the bone
Gemini sets the Dingman apart by its route. It is used through the skin over the cheekbone or from inside the mouth, close to the fragment, where the Gillies goes the long way round from the temple. A heavier shaft suits that short, direct lift, where the force goes straight into the bone.
Twenty one centimeters
At 21 cm the Dingman sits between the 20 cm Gillies and the 25 cm Rowe in our range. It is long enough to give a real lever on the cheekbone, and short enough to steer through a small cut in the skin or the mouth. The surgeon keeps the tip in view under the fragment while the hand stays outside the face.
A grooved handle
The handle in our photograph is grooved along its length. A reduction is a firm pull, and the grooves keep the fingers from sliding on a wet glove while it goes on. The Gillies zygoma elevator in our range has a handle of the same kind. On a fracture tray that carries both, the curve at the tip is how the Dingman is told apart from the flat Gillies blade at a glance.
What the listing gives you
One pattern at one price, read off the listing on 4 November 2026. What it tells you is set out below, and where each detail was read from.
| What you get | Detail | Read from |
|---|---|---|
| Shaft | Narrow, curving gently at the tip | Our photograph |
| Handle | Grooved along its length | Our photograph |
| Length | 21 cm | The product name |
| Options | One size | The listing |
| Price | 30 dollars | The order form |
Where it is used
AI Mode and Gemini, read on 4 November 2026, name these cases for the Dingman zygoma elevator.
| Case | What it lifts | Why this one |
|---|---|---|
| Depressed fracture of the zygoma | The body of the cheekbone | The curved tip slides under the fragment |
| Fracture of the zygomatic arch | The arch | The shaft follows the side of the skull |
| Reduction through the skin | Fragments under a short cut over the cheek | A heavier shaft for a direct lift |
| Reduction from inside the mouth | The cheekbone from below | 21 cm steers through the mouth |
What it does, and what it must not do
The Dingman zygoma elevator lifts a fallen cheekbone or arch back into line. It does not hold the bone once it is up, and it is not a chisel.
| Job | Use the Dingman? | What to use instead or beside it |
|---|---|---|
| Lifting the zygoma through the skin or the mouth | Yes | This is the job it is made for |
| Lifting the arch from a cut in the hairline | Beside it | The Gillies zygoma elevator |
| Lifting a heavy fragment of the zygomatic complex | Beside it | The Rowe zygoma elevator |
| Holding the bone while it is fixed | No | A plate or a wire |
| Cutting bone | Never | An osteotome |
How it compares with the rest of the tray
Ten maxillofacial instruments for fracture work, stripping, wiring and shaping bone make up this set on our site. The working ends are read off each listing’s own photograph, the options off the variations, the lengths off the name and the prices off the order form, on 4 November 2026.
| Instrument | Working end, from our photograph | Options on the listing | Length | Price |
|---|---|---|---|---|
| Hargis stripper | forked tip with a V notch on an angled shank, handle curling at the end | one size | 19 cm | 25 dollars |
| Gillies | long narrow flat blade bent near its rounded end, grooved handle | one size | 20 cm | 30 dollars |
| Dingman (this page) | narrow shaft curving gently at the tip, grooved handle | one size | 21 cm | 30 dollars |
| Rowe | flat bar with a closed loop at the top end and a ring handle | one size | 25 cm | 40 dollars |
| Obwegeser zygomatic arch awl | long curved shaft, pointed tip with an eye, fluted handle | one size | not given on the listing | 20 dollars |
| Obwegeser maxillary awl | slim shaft, pointed tip with an eye, ridged handle | 13, 15 or 17.5 cm | by option | 20, 24 or 17 dollars |
| Kelsey Fry straight | handle of a long wire loop, straight needle point | one size | 15 cm | 19 dollars |
| Kelsey Fry curved | handle of a long wire loop, needle point curving gently | one size | 18 cm | 19 dollars |
| Chompret syndesmotome | slim instrument with a hooked tip, flat handle | Fig 1, 2, 3 or 4 tip | 15 cm | 22 dollars |
| Nasal raspatory | a cross cut rasp at each end, gold colored middle grip | six grits, 3/4 to 9/10 | not given on the listing | 80 dollars |
Materials and finish
Every Dingman zygoma elevator we make is formed from high quality medical grade stainless steel. The steel itself is made to a German specification. We do not publish a grade number.
The Dingman zygoma elevator has a plain steel finish. Look at the curve of the tip before each case. A tip that has been straightened by a heavy lift will not slide under the bone, and that elevator should be set aside.
Caring for it
Rinse the Dingman zygoma elevator as soon as the case ends, before blood dries on the tip and in the grooves of the handle. Brush the shaft and handle, wash it, dry it, and steam sterilize it on the normal cycle with the rest of the tray.
Ordering and wholesale
The Dingman zygoma elevator is made by Adas Instruments in our own workshop and sold direct, which is why the price sits where it does against the catalog houses. Order one for a single tray, or in quantity for a hospital list or a distributor line. We do OEM work under your own brand and your own item numbers. Send us a sample and we will hold a run to your pattern rather than ours. Stock items ship from our own workshop. Backorder items take 10 to 12 working days to make. Every instrument carries a three year replacement warranty against manufacturing defects. Production is controlled under an ISO 13485 quality management system.
Frequently asked questions
What is the Dingman zygoma elevator used for?
It manipulates, lifts and reduces fractures of the zygomatic bone and the zygomatic arch, in oral, maxillofacial and plastic surgery. AI Mode and Gemini both name it for this. Ours is the 21 cm pattern with a curved tip, at 30 dollars.
How is the Dingman different from the Gillies?
Gemini puts it in the route and the shaft. The Gillies is a long, slender shaft passed under the arch from a cut in the hairline. The Dingman is a heavier shaft with a curved tip, used close to the bone through the skin or the mouth.
Is a Dingman malar elevator the same instrument?
Yes. Malar and zygoma both name the cheekbone, so the Dingman malar elevator and the Dingman zygoma elevator are two names for one instrument. Gemini lists both, and the dingman zygomatic reduction tool, as catalog names.
Why is the tip curved?
AI Mode says the shaft and blade are curved to match the contour of the side of the skull. A curved tip slides under a fallen fragment and follows the bone as it is drawn out, where a straight end would meet the bone edge first.
Can it be autoclaved?
Yes. The Dingman zygoma elevator is stainless steel with no coating, and it goes through the normal steam cycle with the rest of the tray. Brush the grooves of the handle clean, dry it, and store it so the tip is not bent.
Related products and categories
Three more instruments from the same maxillofacial tray: the Rowe zygoma elevator, 25 cm, the Obwegeser zygomatic arch awl and the Obwegeser maxillary awl. The rest of the range is under maxillofacial instruments, which sits inside our ENT instruments.



Reviews
There are no reviews yet.