What the Hargis periosteal elevator is
The Hargis periosteal elevator is the hooked elevator for the underside of the lower jaw. When a plate goes on the lower border of the jaw, or a cut runs down to it, the periosteum has to be lifted from the face of the bone and then round and under its edge. A blade that hooks back into a cupped tip does that from above, through the mouth, while the handle stays clear of the teeth.
Google AI Mode, read on 4 November 2026, describes the Hargis periosteal elevator as an oral and maxillofacial instrument for lifting the periosteum and separating it from the bone of the lower and upper jaw. It names orthognathic work, osteotomies, reconstructive surgery and the placing of fixation plates. It describes curved left and curved right patterns in 6.5 and 9 mm, which is what our listing sells.
Gemini, read the same day, places it on the lower border of the jaw, the front of the chin and the bone round the canal of the lower jaw nerve. It lists the Hargis mandibular periosteal elevator and the Hargis periosteal elevator left right as catalog names. Buyers type the short hargis elevator, or the plain mandibular periosteal elevator.
Key design features
A hooked, cupped tip
Our photograph shows the blade curving down the shank and hooking back into a small cupped tip, and the drawings beside it show the same hook from the side and the front. The cup lies against the rounded lower border of the jaw. Drawn along that border, it lifts the periosteum off the edge of the bone.
Left and right patterns
The listing sells the Hargis as a left and a right. The hook is curved to one side, so each one meets the lower border from the side it is made for. Gemini puts this as the main difference from a symmetric elevator, and AI Mode describes the same two patterns.
Two widths, 6.5 and 9 mm
The blade comes in 6.5 and 9.0 mm, at the same price in either hand. The 6.5 mm fits near the canal of the nerve and the narrow part of the border. The 9 mm covers more of the border at each pass on the body of the jaw.
A handle with a finger rest
The handle in our photograph is solid, with a finger rest under the shank and a curl at the end. The finger rest takes the pull as the hook is drawn back along the bone, and the curl keeps the handle from slipping out of the palm.
Which one to order
Four options at one price, read off the variations on 4 November 2026. The listing gives no length, so ask us before you build a tray around it. The guide below is ours.
| Option | Width | Suits | Price |
|---|---|---|---|
| Left, 6.5 mm | 6.5 mm | The left lower border near the nerve canal | 30 dollars |
| Right, 6.5 mm | 6.5 mm | The right lower border near the nerve canal | 30 dollars |
| Left, 9.0 mm | 9.0 mm | The left body of the jaw | 30 dollars |
| Right, 9.0 mm | 9.0 mm | The right body of the jaw | 30 dollars |
Where it is used
AI Mode and Gemini, read on 4 November 2026, name these cases for the Hargis pattern.
| Case | What it lifts | Why this one |
|---|---|---|
| Fixation of a fractured lower jaw | Periosteum round the lower border | The hook reaches under the edge |
| Orthognathic surgery | Periosteum along the osteotomy line | Left and right for each side |
| Chin surgery | Periosteum over the front of the chin | Cupped tip lies on the curve |
| Work near the nerve canal | Periosteum round the canal | 6.5 mm fits the narrow part |
What it does, and what it must not do
The Hargis periosteal elevator lifts periosteum round the lower border of the jaw. It is not a retractor and not a lever.
| Job | Use the Hargis? | What to use instead or beside it |
|---|---|---|
| Lifting periosteum round the lower border of the jaw | Yes | This is the job it is made for |
| Holding the soft tissue off the lower border | No | The Hargis mandibular body retractor |
| Stripping round the back border of the ramus | Beside it | The Obwegeser J-stripper |
| Clearing the flat outer face of the jaw | Beside it | The Obwegeser flat cutting elevator |
| Levering bone | Never | A bone lever |
How it compares with the rest of the family
Ten periosteal elevators and raspatories make up this family on our site. The working ends are read off each listing’s own photograph, the options off the variations, the lengths off the name and the prices off the order form, on 4 November 2026.
| Instrument | Working end, from our photograph | Options on the listing | Length | Price |
|---|---|---|---|---|
| Tessier dissector | single narrow blade curving back at the tip, fluted handle | 30 or 60 pattern | 18 cm | 25 dollars |
| Seldin | a curved blade at each end, bending opposite ways, flat handle | one size | 19 cm | 25 dollars |
| Salzburg | a small curved blade at each end, knurled middle grip | slightly or strongly curved | 24 cm | 25 dollars |
| Obwegeser flat cutting | straight flat blade with a rounded end, fluted handle | 6, 7, 9 or 11 mm | 18 cm | 25 dollars |
| Obwegeser angled cutting | blade end cut on a slant, smooth round handle | 6, 7, 9 or 11 mm | 18 cm | 25 dollars |
| Obwegeser J-stripper | blade curling back into a J at the tip, fluted handle | 5, 7 or 9 mm | 20 cm | 25 dollars |
| Obwegeser Freer | a strongly curved blade and a gently curved blade, knurled grip | one size | 20 cm | 21 dollars |
| Obwegeser swallowtail | forked tip with a V notch between two points, fluted handle | one size | 17 cm | 25 dollars |
| Obwegeser double ended | a rounded spoon shaped blade at each end, one wider, knurled grip | one size | 20 cm | 21 dollars |
| Hargis (this page) | hooked cupped tip on a curved shank, solid handle with a finger rest | 6.5 or 9.0 mm, left or right | not given on the listing | 30 dollars |
Materials and finish
Every Hargis periosteal elevator we make is formed from high quality medical grade stainless steel. The steel itself is made to a German specification. We do not publish a grade number.
The finish is plain steel. Look at the cupped tip before each case. If the hook has been opened out, the cup will not sit on the lower border, and the tip slides off the bone instead of following it.
Caring for it
Rinse the Hargis periosteal elevator as soon as the case ends, before blood dries in the cup of the tip. Brush into the cup and along the shank, wash it, dry it, and steam sterilize it on the normal cycle. Keep the left and the right apart on the tray, marked, so the correct side is picked up.
Ordering and wholesale
The Hargis periosteal elevator is made by Adas Instruments in our own workshop and sold direct, which is why the price sits where it does against the catalog houses. Order one for a single tray, or in quantity for a hospital list or a distributor line. We do OEM work under your own brand and your own item numbers. Send us a sample and we will hold a run to your pattern rather than ours. Stock items ship from our own workshop. Backorder items take 10 to 12 working days to make. Every instrument carries a three year replacement warranty against manufacturing defects. Production is controlled under an ISO 13485 quality management system.
Frequently asked questions
What is the Hargis periosteal elevator used for?
It lifts the periosteum and separates it from the bone of the lower and upper jaw, and its hook reaches round the lower border of the jaw. AI Mode names orthognathic work, osteotomies, reconstruction and the placing of plates. Ours is 6.5 or 9 mm, left or right, at 30 dollars.
Why is the Hargis made as a left and a right?
Because its hook is curved to one side. Each pattern meets the lower border of the jaw from the side it is made for, so a full tray carries a left and a right. AI Mode and Gemini both describe the two patterns.
Which Hargis width should I order, 6.5 or 9 mm?
The 6.5 mm fits the narrow part of the lower border and the bone near the nerve canal. The 9 mm covers more of the border on the body of the jaw at each pass. Every option is 30 dollars.
How long is it?
The listing does not give a length, and we do not print a figure we have not measured. Ask us before you order and we will give you the measured length of the pattern we ship, so it can be checked against your tray and your sterilization box.
Can it be autoclaved?
Yes. It is stainless steel with no coating, and it goes through the normal steam cycle with the rest of the tray. Brush into the cupped tip, dry it fully, and store it so the hook is not bent by other instruments.
Related products and categories
Three more periosteal instruments from the same tray: the Tessier dissector, 18 cm, the Seldin periosteal elevator and the Salzburg periosteal elevator, 24 cm. The rest of the range is under maxillofacial instruments, which sits inside our ENT instruments.



Reviews
There are no reviews yet.