What the Salzburg periosteal elevator is
The Salzburg periosteal elevator is the long reach elevator of the jaw tray. In orthognathic surgery and in facial trauma, the periosteum has to be lifted well back from the incision, up the ramus of the lower jaw or round the back of the upper jaw, through a tunnel the surgeon cannot see into. A long, slender elevator with a small blade does that work, because the blade fits the tunnel and the length keeps the hand outside it.
Google AI Mode, read on 4 November 2026, describes the Salzburg periosteal elevator as an instrument used to lift, separate or remove periosteal tissue and soft tissue from the surface of the bone. It names oral, maxillofacial, orthopedic, neurosurgical and reconstructive surgery, and calls the pattern double ended.
Gemini, read the same day, places it in oral and maxillofacial, orthognathic and facial trauma surgery, on the periosteum of the upper and lower jaw and the deep tunnels under it. It lists the Salzburg curved periosteal elevator and the salzburg periosteal elevator 24cm as catalog names. Buyers without the eponym type long periosteal elevator or curved periosteal elevator.
Key design features
Twenty four centimeters
At 24 cm this is the longest elevator in the family. The length is the point of the pattern: the blade can travel deep under the periosteum while the fingers stay at the mouth or the edge of a facial incision. Gemini puts the difference from a Freer in exactly this, a longer shaft for deeper reach. On a tray beside the 19 cm Seldin and the 20 cm Obwegeser patterns, the Salzburg is the one picked up when the work moves back from the incision rather than staying beside it.
A small curved blade at each end
Our photograph shows a small curved blade at each end. A small blade fits a narrow tunnel without stretching it, and the curve lets the edge stay against the bone as it is pushed along. With a blade at each end, the instrument is turned round rather than swapped.
Slightly or strongly curved
The listing offers two tips, slightly curved and strongly curved, at the same price. The slight curve suits flatter bone such as the outer face of the jaw. The strong curve hooks round a tighter bend, such as the back of the upper jaw or the edge of the ramus. Both tips sit on the same 24 cm shaft, so the choice changes only the shape at the end.
A slender shaft with a knurled grip
The shaft in our photograph is slender for its whole length, with a knurled section in the middle where the fingers hold it. The knurling gives a grip with wet gloves. The slender shaft takes up little room beside a retractor in the mouth, which leaves the view down the tunnel open. A thick handle there would block the light the assistant is shining in.
Which tip to order
Two tips at one price, read off the variations on 4 November 2026. The guide below is ours.
| Tip | Length | Suits | Price |
|---|---|---|---|
| Slightly curved | 24 cm | Flatter bone, such as the outer face of the lower jaw | 25 dollars |
| Strongly curved | 24 cm | Tighter bends, such as the back of the upper jaw and the ramus | 25 dollars |
Where it is used
AI Mode and Gemini, read on 4 November 2026, name these cases for the Salzburg pattern.
| Case | What it lifts | Why this one |
|---|---|---|
| Orthognathic surgery | Periosteum up the ramus of the lower jaw | 24 cm reaches the deep tunnel |
| Upper jaw surgery | Periosteum round the back of the maxilla | Strongly curved tip hooks the bend |
| Facial trauma | Periosteum over fracture lines | Small blade fits a narrow tunnel |
| Reconstructive surgery | Periosteum and soft tissue off bone | Two ends on one instrument |
What it does, and what it must not do
The Salzburg periosteal elevator lifts periosteum in a deep tunnel. It is not a lever for bone and not a retractor.
| Job | Use the Salzburg? | What to use instead or beside it |
|---|---|---|
| Lifting periosteum deep along the jaw | Yes | This is the job it is made for |
| Lifting a flap in the front of the mouth | Beside it | The Seldin periosteal elevator, 19 cm |
| Stripping round the lower border of the jaw | Beside it | The Obwegeser J-stripper |
| Holding the tunnel open | No | A channel retractor |
| Levering bone | Never | A bone lever |
How it compares with the rest of the family
Ten periosteal elevators and raspatories make up this family on our site. The working ends are read off each listing’s own photograph, the options off the variations, the lengths off the name and the prices off the order form, on 4 November 2026.
| Instrument | Working end, from our photograph | Options on the listing | Length | Price |
|---|---|---|---|---|
| Tessier dissector | single narrow blade curving back at the tip, fluted handle | 30 or 60 pattern | 18 cm | 25 dollars |
| Seldin | a curved blade at each end, bending opposite ways, flat handle | one size | 19 cm | 25 dollars |
| Salzburg (this page) | a small curved blade at each end, knurled middle grip | slightly or strongly curved | 24 cm | 25 dollars |
| Obwegeser flat cutting | straight flat blade with a rounded end, fluted handle | 6, 7, 9 or 11 mm | 18 cm | 25 dollars |
| Obwegeser angled cutting | blade end cut on a slant, smooth round handle | 6, 7, 9 or 11 mm | 18 cm | 25 dollars |
| Obwegeser J-stripper | blade curling back into a J at the tip, fluted handle | 5, 7 or 9 mm | 20 cm | 25 dollars |
| Obwegeser Freer | a strongly curved blade and a gently curved blade, knurled grip | one size | 20 cm | 21 dollars |
| Obwegeser swallowtail | forked tip with a V notch between two points, fluted handle | one size | 17 cm | 25 dollars |
| Obwegeser double ended | a rounded spoon shaped blade at each end, one wider, knurled grip | one size | 20 cm | 21 dollars |
| Hargis | hooked cupped tip on a curved shank, solid handle with a finger rest | 6.5 or 9.0 mm, left or right | not given on the listing | 30 dollars |
Materials and finish
Every Salzburg periosteal elevator we make is formed from high quality medical grade stainless steel. The steel itself is made to a German specification. We do not publish a grade number.
The finish is plain steel. A slender 24 cm shaft can be bent by levering, so never pry with it. Look down the length of the shaft before each case: it should be straight from end to end, and both blades should keep their curve. Lay it on a flat tray: if one end lifts, the shaft has been bent and the instrument should be set aside.
Caring for it
Rinse the Salzburg periosteal elevator as soon as the case ends, before blood dries on the blades and in the knurling. Brush both blades and the knurled grip, wash it, dry it, and steam sterilize it on the normal cycle. Store it flat on the tray so the long shaft is not bent by the weight of other instruments.
Ordering and wholesale
The Salzburg periosteal elevator is made by Adas Instruments in our own workshop and sold direct, which is why the price sits where it does against the catalog houses. Order one for a single tray, or in quantity for a hospital list or a distributor line. We do OEM work under your own brand and your own item numbers. Send us a sample and we will hold a run to your pattern rather than ours. Stock items ship from our own workshop. Backorder items take 10 to 12 working days to make. Every instrument carries a three year replacement warranty against manufacturing defects. Production is controlled under an ISO 13485 quality management system.
Frequently asked questions
What is the Salzburg periosteal elevator used for?
It lifts and separates the periosteum and the soft tissue over it from the bone, deep along the jaw. AI Mode names oral, maxillofacial, orthopedic, neurosurgical and reconstructive surgery. Ours is the 24 cm pattern, slightly or strongly curved, at 25 dollars.
Which Salzburg tip should I order?
The slightly curved tip suits flatter bone such as the outer face of the lower jaw. The strongly curved tip suits a tighter bend, such as the back of the upper jaw. Both are 24 cm and 25 dollars, so a tray can carry the pair.
Why is the Salzburg so long?
The length lets the blade travel deep under the periosteum while the hand stays outside the mouth or the incision. Gemini puts this as the main difference from a Freer elevator, which is shorter with a shallower curve.
Is a long periosteal elevator the same thing?
It is the plain description of it. Buyers who do not know the eponym type long periosteal elevator or curved periosteal elevator. Gemini lists the Salzburg curved periosteal elevator as a catalog name for the same instrument.
Can it be autoclaved?
Yes. It is stainless steel with no coating, and it goes through the normal steam cycle with the rest of the tray. Brush the knurled grip clean, dry it fully, and store it flat so the long shaft stays straight.
Related products and categories
Three more periosteal instruments from the same tray: the Obwegeser flat cutting elevator, the Obwegeser angled cutting elevator and the Obwegeser J-stripper. The rest of the range is under maxillofacial instruments, which sits inside our ENT instruments.


Reviews
There are no reviews yet.