What the Obwegeser flat cutting elevator is
The Obwegeser flat cutting elevator is the workhorse of the jaw osteotomy tray. Before the lower jaw is split or the upper jaw is cut at the Le Fort I level, the periosteum has to be cleared from the bone where the cut will run. On the broad, flat outer face of the lower jaw, a straight, flat blade does that well, because the whole width of the blade meets the bone at once.
Google AI Mode, read on 4 November 2026, gives the Obwegeser periosteal elevator and bone plane as other names. It describes a maxillofacial and orthopedic tool for the clean separation of dense periosteum from flat bone surfaces, in orthognathic and reconstructive work on the lower and upper jaw. It names tunneling under the periosteum on the outer face of the lower jaw, clearing the bone before Le Fort I and sagittal split osteotomies, and releasing muscle attachments such as the mentalis.
Gemini, read the same day, lists the Obwegeser flat cutting periosteal elevator and the obwegeser flat cutting elevator 18cm as catalog names. In its words, the edge both cuts and lifts the periosteum, where a plain elevator only lifts. Buyers without the eponym type flat periosteal elevator or flat cutting periosteal elevator.
Key design features
A straight flat blade
Our photograph shows a single straight blade, flat across, with a rounded end, and the outline drawing beside it shows parallel sides. A flat blade meets a flat bone along its whole width. On the outer face of the lower jaw, that lifts a broad band of periosteum with each stroke.
Four widths
The listing sells the blade in 6, 7, 9 and 11 mm, all at 25 dollars. The narrow widths start a tunnel through a short incision. The wide ones clear the long, flat stretch of bone where a sagittal split will run. Buying the four together means the blade can be matched to the incision at each stage of the case, from the first opening to the full clearance of the bone.
Eighteen centimeters
At 18 cm the elevator reaches back along the lower jaw from an incision in the mouth with the hand outside the lips. It is shorter than the 24 cm Salzburg, which is kept for the deepest tunnels. That length makes it easier to steer on the front and the body of the jaw.
A fluted round handle
The handle is round and fluted. The flutes give a grip with wet gloves, and the round shape lets the blade be rolled a little to keep it flat on the bone as the surface turns. The J-stripper and the swallowtail in this family carry a fluted handle of the same kind in our photographs.
Which width to order
Four widths at one price, read off the variations on 4 November 2026. The guide below is ours.
| Width | Length | Suits | Price |
|---|---|---|---|
| 6 mm | 18 cm | Starting a tunnel through a short incision | 25 dollars |
| 7 mm | 18 cm | The body of the jaw in a small mouth | 25 dollars |
| 9 mm | 18 cm | The outer face of the lower jaw | 25 dollars |
| 11 mm | 18 cm | Long, flat stretches before a sagittal split | 25 dollars |
Where it is used
AI Mode and Gemini, read on 4 November 2026, name these cases for the flat cutting pattern.
| Case | What it clears | Why this one |
|---|---|---|
| Sagittal split of the lower jaw | Periosteum along the line of the split | Flat blade meets flat bone |
| Le Fort I osteotomy | Periosteum over the front of the upper jaw | Wide blades clear a band at once |
| Tunneling on the lower jaw | Periosteum on the outer face | Narrow blades start the tunnel |
| Chin surgery | Muscle attachments such as the mentalis | 18 cm steers well at the front |
What it does, and what it must not do
The Obwegeser flat cutting elevator clears periosteum from flat bone. It is not an osteotome and it does not cut bone.
| Job | Use the flat cutting elevator? | What to use instead or beside it |
|---|---|---|
| Clearing periosteum from flat jaw bone | Yes | This is the job it is made for |
| Reaching round a corner or into the ramus | Beside it | The Obwegeser angled cutting elevator |
| Stripping round the lower border of the jaw | Beside it | The Obwegeser J-stripper |
| Cutting through bone | No | An osteotome or a saw |
| Levering bone apart | Never | A bone spreader or lever |
How it compares with the rest of the family
Ten periosteal elevators and raspatories make up this family on our site. The working ends are read off each listing’s own photograph, the options off the variations, the lengths off the name and the prices off the order form, on 4 November 2026.
| Instrument | Working end, from our photograph | Options on the listing | Length | Price |
|---|---|---|---|---|
| Tessier dissector | single narrow blade curving back at the tip, fluted handle | 30 or 60 pattern | 18 cm | 25 dollars |
| Seldin | a curved blade at each end, bending opposite ways, flat handle | one size | 19 cm | 25 dollars |
| Salzburg | a small curved blade at each end, knurled middle grip | slightly or strongly curved | 24 cm | 25 dollars |
| Obwegeser flat cutting (this page) | straight flat blade with a rounded end, fluted handle | 6, 7, 9 or 11 mm | 18 cm | 25 dollars |
| Obwegeser angled cutting | blade end cut on a slant, smooth round handle | 6, 7, 9 or 11 mm | 18 cm | 25 dollars |
| Obwegeser J-stripper | blade curling back into a J at the tip, fluted handle | 5, 7 or 9 mm | 20 cm | 25 dollars |
| Obwegeser Freer | a strongly curved blade and a gently curved blade, knurled grip | one size | 20 cm | 21 dollars |
| Obwegeser swallowtail | forked tip with a V notch between two points, fluted handle | one size | 17 cm | 25 dollars |
| Obwegeser double ended | a rounded spoon shaped blade at each end, one wider, knurled grip | one size | 20 cm | 21 dollars |
| Hargis | hooked cupped tip on a curved shank, solid handle with a finger rest | 6.5 or 9.0 mm, left or right | not given on the listing | 30 dollars |
Materials and finish
Every Obwegeser flat cutting elevator we make is formed from high quality medical grade stainless steel. The steel itself is made to a German specification. We do not publish a grade number.
The finish is plain steel. The edge is what this pattern is bought for, so look along it before each case. A nick or a rolled corner catches the periosteum and tears it, and that elevator should be set aside.
Caring for it
Rinse the Obwegeser flat cutting elevator as soon as the case ends, before blood dries on the blade and in the flutes. Brush the blade and handle, wash it, dry it, and steam sterilize it on the normal cycle. Keep the four widths in order on the tray, and do not let the edges rest against other steel.
Ordering and wholesale
The Obwegeser flat cutting elevator is made by Adas Instruments in our own workshop and sold direct, which is why the price sits where it does against the catalog houses. Order one for a single tray, or in quantity for a hospital list or a distributor line. We do OEM work under your own brand and your own item numbers. Send us a sample and we will hold a run to your pattern rather than ours. Stock items ship from our own workshop. Backorder items take 10 to 12 working days to make. Every instrument carries a three year replacement warranty against manufacturing defects. Production is controlled under an ISO 13485 quality management system.
Frequently asked questions
What is the Obwegeser flat cutting elevator used for?
It separates dense periosteum from flat bone in orthognathic and reconstructive surgery on the jaws. AI Mode names tunneling on the outer face of the lower jaw and clearing the bone before Le Fort I and sagittal split osteotomies. Ours is 18 cm, in four widths, at 25 dollars.
Which flat cutting width should I order?
The 6 and 7 mm blades start a tunnel through a short incision and suit a small mouth. The 9 and 11 mm blades clear the broad outer face of the lower jaw. All four are 25 dollars, and a full osteotomy tray carries the set.
How is the flat cutting pattern different from the angled one?
Gemini puts it in the blade. The flat cutting pattern works on straight, flat bone. The angled cutting pattern has its end cut on a slant, to reach round corners and into the ramus during a sagittal split.
Does it cut bone?
No. The word cutting refers to the edge that frees the periosteum, which Gemini describes as cutting and lifting in one stroke. Bone is cut with an osteotome or a saw, and this elevator should never be struck or used to pry.
Can it be autoclaved?
Yes. It is stainless steel with no coating, and it goes through the normal steam cycle with the rest of the tray. Brush the flutes clean, dry the blade, and store it so the edge does not knock against other instruments.
Related products and categories
Three more periosteal instruments from the same tray: the Obwegeser angled cutting elevator, the Obwegeser J-stripper and the Obwegeser Freer periosteal elevator. The rest of the range is under maxillofacial instruments, which sits inside our ENT instruments.


Reviews
There are no reviews yet.