What the Obwegeser angled cutting elevator is
The Obwegeser angled cutting elevator is the partner of the flat cutting pattern. Both clear periosteum from the jaw before an osteotomy, but the flat blade works on flat bone and stops where the bone turns a corner. At the back of the upper jaw, behind the last molar and up the ramus of the lower jaw, the surface bends away and the space closes in. A blade with its end cut on a slant reaches into that corner, where a square end would meet it edge first.
Google AI Mode, read on 4 November 2026, names it the Obwegeser angled cutting periosteal elevator, and describes an instrument for the dissection and elevation of dense periosteum in oral and maxillofacial surgery. It names starting the flap in the restricted spaces of the back of the upper jaw and the ramus of the lower jaw, and gives 18 and 20 cm as the lengths it is made in.
Gemini, read the same day, places it on the periosteum of the ascending ramus, the junction behind the upper jaw and angled planes of bone. It lists the Obwegeser offset periosteal stripper as a catalog name, and puts the difference from the flat pattern in the blade, which reaches round corners during sagittal split work. Buyers without the eponym type angled periosteal elevator or angled cutting periosteal elevator.
Key design features
A blade end cut on a slant
Our photograph shows the end of the blade cut on a slant, and the drawing beside it shows the same slanted end. The long point of the slant leads into a corner of bone, and the edge then follows the bone as it turns. That is the one job a square ended blade cannot do as well.
Four widths
The listing sells the blade in 6, 7, 9 and 11 mm, all at 25 dollars. The narrow widths fit the tight space behind the last molar. The wider ones clear the broad face of the ramus once the flap has been started.
Eighteen centimeters
At 18 cm the elevator reaches the ramus from an incision in the mouth with the hand outside the lips. AI Mode gives 18 and 20 cm as the lengths this pattern is made in, and ours is the 18 cm. It matches the flat cutting pattern, so the two sit side by side on the tray.
A smooth round handle
The handle in our photograph is smooth and round, without flutes. A round handle rolls in the fingers, which lets the surgeon turn the slanted end to face the corner without moving the whole hand. On the tray, the smooth handle also tells this pattern apart from the fluted flat cutting elevator at a glance, which saves a wrong pick in the middle of a case.
Which width to order
Four widths at one price, read off the variations on 4 November 2026. The guide below is ours.
| Width | Length | Suits | Price |
|---|---|---|---|
| 6 mm | 18 cm | Starting the flap behind the last molar | 25 dollars |
| 7 mm | 18 cm | The back of the upper jaw in a small mouth | 25 dollars |
| 9 mm | 18 cm | The front edge of the ramus | 25 dollars |
| 11 mm | 18 cm | The broad face of the ramus | 25 dollars |
Where it is used
AI Mode and Gemini, read on 4 November 2026, name these cases for the angled cutting pattern.
| Case | What it clears | Why this one |
|---|---|---|
| Sagittal split of the lower jaw | Periosteum up the ramus | Slanted end reaches round the corner |
| Le Fort I osteotomy | Periosteum at the back of the upper jaw | Narrow widths fit the tight space |
| Ramus surgery | Periosteum on the ascending ramus | Wide blades clear the face |
| Flap start in a narrow space | The first lift of the periosteum | The long point leads in |
What it does, and what it must not do
The Obwegeser angled cutting elevator clears periosteum round corners of bone. It is not an osteotome and it does not cut bone.
| Job | Use the angled cutting elevator? | What to use instead or beside it |
|---|---|---|
| Clearing periosteum round a corner of the jaw | Yes | This is the job it is made for |
| Clearing broad, flat bone | Beside it | The Obwegeser flat cutting elevator |
| Stripping the lower border of the jaw | Beside it | The Obwegeser J-stripper |
| Cutting through bone | No | An osteotome or a saw |
| Levering bone | Never | A bone lever |
How it compares with the rest of the family
Ten periosteal elevators and raspatories make up this family on our site. The working ends are read off each listing’s own photograph, the options off the variations, the lengths off the name and the prices off the order form, on 4 November 2026.
| Instrument | Working end, from our photograph | Options on the listing | Length | Price |
|---|---|---|---|---|
| Tessier dissector | single narrow blade curving back at the tip, fluted handle | 30 or 60 pattern | 18 cm | 25 dollars |
| Seldin | a curved blade at each end, bending opposite ways, flat handle | one size | 19 cm | 25 dollars |
| Salzburg | a small curved blade at each end, knurled middle grip | slightly or strongly curved | 24 cm | 25 dollars |
| Obwegeser flat cutting | straight flat blade with a rounded end, fluted handle | 6, 7, 9 or 11 mm | 18 cm | 25 dollars |
| Obwegeser angled cutting (this page) | blade end cut on a slant, smooth round handle | 6, 7, 9 or 11 mm | 18 cm | 25 dollars |
| Obwegeser J-stripper | blade curling back into a J at the tip, fluted handle | 5, 7 or 9 mm | 20 cm | 25 dollars |
| Obwegeser Freer | a strongly curved blade and a gently curved blade, knurled grip | one size | 20 cm | 21 dollars |
| Obwegeser swallowtail | forked tip with a V notch between two points, fluted handle | one size | 17 cm | 25 dollars |
| Obwegeser double ended | a rounded spoon shaped blade at each end, one wider, knurled grip | one size | 20 cm | 21 dollars |
| Hargis | hooked cupped tip on a curved shank, solid handle with a finger rest | 6.5 or 9.0 mm, left or right | not given on the listing | 30 dollars |
Materials and finish
Every Obwegeser angled cutting elevator we make is formed from high quality medical grade stainless steel. The steel itself is made to a German specification. We do not publish a grade number.
The Obwegeser angled cutting elevator has a plain steel finish. Look at the long point of the slant before each case, because it does the first work in every corner and wears first. A blunted point slips on the bone instead of leading under the periosteum. Check the slant against the drawing on the listing: if it has worn square, set it aside.
Caring for it
Rinse the Obwegeser angled cutting elevator as soon as the case ends, before blood dries on the blade. Brush the blade and handle, wash it, dry it, and steam sterilize it on the normal cycle. Keep the four widths in order, and do not let the slanted points rest against other steel.
Ordering and wholesale
The Obwegeser angled cutting elevator is made by Adas Instruments in our own workshop and sold direct, which is why the price sits where it does against the catalog houses. Order one for a single tray, or in quantity for a hospital list or a distributor line. We do OEM work under your own brand and your own item numbers. Send us a sample and we will hold a run to your pattern rather than ours. Stock items ship from our own workshop. Backorder items take 10 to 12 working days to make. Every instrument carries a three year replacement warranty against manufacturing defects. Production is controlled under an ISO 13485 quality management system.
Frequently asked questions
What is the Obwegeser angled cutting elevator used for?
It dissects and lifts dense periosteum in tight spaces of the jaw, such as the back of the upper jaw and the ramus of the lower jaw. AI Mode names oral and maxillofacial surgery and the start of the flap there. Ours is 18 cm, in four widths, at 25 dollars.
How is the angled cutting pattern different from the flat one?
Gemini puts it in the blade. The flat cutting pattern has a square end for straight, flat bone. The angled cutting pattern has its end cut on a slant, to reach round corners and up the ramus during a sagittal split.
Which angled cutting width should I order?
The 6 and 7 mm blades fit the tight space behind the last molar and the back of a small upper jaw. The 9 and 11 mm blades clear the face of the ramus once the flap is started. All four are 25 dollars.
Is an offset periosteal stripper the same instrument?
Gemini lists the Obwegeser offset periosteal stripper as a catalog name for this pattern. Offset, angled and slanted all describe the same thing on it: a blade end set at a slant so the point leads into a corner of bone.
Can it be autoclaved?
Yes. The Obwegeser angled cutting elevator is stainless steel with no coating, and it goes through the normal steam cycle with the rest of the tray. Dry the blade well, and store it so the slanted point does not knock against other instruments.
Related products and categories
Three more periosteal instruments from the same tray: the Obwegeser J-stripper, the Obwegeser Freer periosteal elevator and the Obwegeser swallowtail raspatory. The rest of the range is under maxillofacial instruments, which sits inside our ENT instruments.


Reviews
There are no reviews yet.