What a Munro ramus retractor is
Most of the retractors in this family are narrow blades on a slim shaft with a ring and a loop. The Munro is a different instrument. It has a broad curved blade made to cover the outer face of the ramus, and a solid handle that the hand wraps round, because the masseter over that part of the jaw is a thick muscle and takes a strong pull to hold back.
Google AI Mode, read on 3 November 2026, gives the Munro ramus retractor, also known as the Munro lateral vertical ramus retractor, as a craniomaxillofacial instrument for holding back tissue and exposing the mandibular ramus. It names sagittal split osteotomy, mandibular reconstruction and vertical ramus osteotomy. It sets the Munro apart from the Obwegeser by its solid, hooked handle, against the ring handles on the Obwegeser patterns, and gives blade widths of 20 to 35 mm.
The four widths on our listing are exactly that range. Buyers also ask for a munro retractor, a munro lateral ramus retractor or simply a lateral ramus retractor, after the side of the ramus it holds. Gemini lists it against the Obwegeser ramus retractor: the Munro engages the outer surface and back edge of the vertical ramus.
Key design features
A broad curved blade
In our photograph the blade is broad and curved, with a rolled edge. It covers the outer face of the ramus rather than a single edge of it, and the curve follows the bone from front to back. The rolled edge is what the tissue rests on.
Four widths, all 80 mm deep
The listing carries four blades: 20, 25, 30 and 35 mm wide, each 80 mm deep. The narrow ones suit a smaller jaw or a shorter incision; the 35 mm holds the most tissue on a large adult jaw. All four cost 28 dollars.
A solid hooked handle
The handle is a solid flat bar whose end curves round into a hook. The hand closes round the bar, and the hook gives the fingers a stop, so the pull does not slide the hand off the end. It is the feature the AI Mode answer uses to tell the Munro from the Obwegeser.
One piece
Blade and handle are one piece of stainless steel, with no ring, no loop and no joint. That makes it stiff under a heavy pull, which is what holding the masseter off the ramus asks of it.
Which blade to order
The four variations on the listing, read on 3 November 2026. All cost the same.
| Blade on the listing | Width | Where it suits | Price |
|---|---|---|---|
| 20 x 80 mm | Narrow | A smaller jaw or a short incision | 28 dollars |
| 25 x 80 mm | Medium | A standard adult jaw | 28 dollars |
| 30 x 80 mm | Wide | A larger exposure of the ramus | 28 dollars |
| 35 x 80 mm | Widest | A large adult jaw and a heavy muscle | 28 dollars |
Where it is used
Gemini, read on 3 November 2026, places the Munro in oral and maxillofacial and orthognathic surgery, on the outer surface of the mandibular ramus, the masseter and the back edge of the jaw.
| Case | What it holds | Blade to start with |
|---|---|---|
| Intraoral vertical ramus osteotomy | Masseter and tissue off the outer ramus | 25 or 30 x 80 mm |
| Sagittal split osteotomy | Tissue on the outer side of the ramus | 25 x 80 mm |
| Reconstruction of the ramus | The soft tissue over the graft site | By the size of the jaw |
| Fracture of the ramus or condylar neck | Tissue over the fracture | 20 or 25 x 80 mm |
What it holds back, and what it must not do
It holds the outer side of the ramus. It does not sit on a bone edge, and it is not a lever.
| Job | Use the Munro? | What to use instead or beside it |
|---|---|---|
| Holding tissue off the outer ramus | Yes | This is the job it is made for |
| Seating on the front edge of the ramus | No | An Obwegeser ramus retractor |
| Sitting on the lower border during a split | No | An Obwegeser channel retractor |
| Holding the cheek at the front of the mouth | No | A cheek retractor |
| Levering bone | Never | An elevator |
How it compares with the rest of the family
Ten Obwegeser and Munro jaw retractors make up this family on our site. The working ends are read off each listing’s own photograph, the sizes off the variations, the lengths off the name and the prices off the order form, on 3 November 2026.
| Retractor | Working end, from our photograph | Sizes on the listing | Length | Price |
|---|---|---|---|---|
| Obwegeser third molar | right angled blade with a turned down tip, ring and loop handle | one size | 24 cm | 26 dollars |
| Obwegeser retractor 24 cm | right angled blade, bent up or bent down, ring and loop handle | seven blades, 5 x 16 to 16 x 80 mm | 24 cm | 26 dollars |
| Obwegeser soft tissue 21 cm | wider right angled blade, ring and loop handle | three blades, 11 x 40 to 16 x 80 mm | 21 cm | 26 dollars |
| Obwegeser ramus 24 cm | right angled blade with a notched tip, ring and loop handle | 11/15 x 70 or 12/22 x 70 mm | 24 cm | 26 dollars |
| Obwegeser ramus 22 cm | right angled blade with a notched tip, ring and loop handle | one size | 22 cm | 26 dollars |
| Obwegeser nasal spine 22 cm | narrow right angled blade, ring and loop handle | one size | 22 cm | 24 dollars |
| Obwegeser nasal spine 24 cm | right angled blade with a forked tip, ring and loop handle | one size | 24 cm | 24 dollars |
| Obwegeser chin | flat angled bar with a pronged tip | one size | 16 cm | 20 dollars |
| Obwegeser channel | flat bar, slim rounded end and a curved channel hook | 8 or 10 mm | 16 cm | 14 dollars |
| Munro ramus (this page) | broad curved blade on a solid hooked handle | four blades, 20 to 35 x 80 mm | 16 cm | 28 dollars |
Materials and finish
Every Munro ramus retractor we make is formed from high quality medical grade stainless steel. The steel itself is made to a German specification. We do not publish a grade number.
The finish is plain steel. The whole retractor is one piece. Our listing gives the overall length as 16 cm, which puts the handle just outside the mouth; the blade sizes come from the variations.
Caring for it
Rinse it as soon as the case ends, before blood dries under the rolled edge. Brush both faces of the blade, under the edge and inside the curve of the handle. Dry it, steam sterilize it on the normal instrument cycle, and look at the blade before it goes back on the tray. A blade that has been bent flatter will not follow the ramus, so set it aside rather than bend it back by hand.
Ordering and wholesale
The Munro ramus retractor is made by Adas Instruments in our own workshop and sold direct, which is why the price sits where it does against the catalog houses. Order one for a single tray, or in quantity for a hospital list or a distributor line. We do OEM work under your own brand and your own item numbers. Send us a sample and we will hold a run to your pattern rather than ours. Stock items ship from our own workshop. Backorder items take 10 to 12 working days to make. Every instrument carries a three year replacement warranty against manufacturing defects. Production is controlled under an ISO 13485 quality management system.
Frequently asked questions
What is a Munro ramus retractor used for?
It holds back the masseter and the soft tissue on the outer side of the lower jaw and exposes the mandibular ramus. It is used in intraoral vertical ramus osteotomy, sagittal split osteotomy, reconstruction of the ramus and the repair of ramus and condylar neck fractures.
How is the Munro different from an Obwegeser ramus retractor?
The AI Mode answer puts it in the handle: the Munro has a solid, hooked handle, and the Obwegeser has a ring and a loop. Gemini adds the blade: the Munro covers the outer surface and back edge of the vertical ramus, while the Obwegeser seats on the front edge. Ours are 28 and 26 dollars.
Which Munro ramus retractor blade size do I need?
All four blades are 80 mm deep. The 20 mm suits a smaller jaw, the 25 mm a standard adult, the 30 mm a larger exposure and the 35 mm a large jaw with a heavy muscle. All are 28 dollars, and the table on this page lists them.
Is a lateral ramus retractor the same as the Munro?
Lateral ramus retractor is the plain name for a blade that holds the outer side of the ramus, and the Munro lateral vertical ramus retractor is that pattern by name. The AI Mode answer gives both names for it in its first sentence.
Can it be autoclaved?
Yes. It is one piece of stainless steel with no joint, screw or coating, and it goes through the normal steam cycle with the rest of the tray. Rinse it and brush under the rolled edge first, and dry it before it is packed.
Related products and categories
Three more jaw retractors from the same family: the Obwegeser third molar retractor, the Obwegeser retractor, 24 cm and the Obwegeser soft tissue retractor, 21 cm. The rest of the range is under maxillofacial instruments, which sits inside our ENT instruments.


Reviews
There are no reviews yet.