What the Obwegeser maxillary osteotome is
The Obwegeser maxillary osteotome works at the back of the upper jaw. In a Le Fort I operation the maxilla is cut free so it can be moved, and the last place it holds on is behind, where it meets the pterygoid plates of the skull. That junction sits deep behind the last molar, round a corner from the mouth, and a curved blade is what reaches it.
Google AI Mode, read on 4 November 2026, gives the pterygo-maxillary osteotome as another name, and describes an instrument used to detach, manipulate and separate the maxilla from the bones around it and from the pterygoid plate. It places it in dental, plastic, ENT and oral and maxillofacial surgery, naming the Le Fort I osteotomy, the separation of the pterygomaxillary junction and orthognathic surgery of the upper jaw.
Gemini, read the same day, places it on the walls of the maxillary sinus, the pterygomaxillary junction and Le Fort I sites. It lists the maxillary down fracture osteotome, the le fort osteotome and the obwegeser maxillary osteotome 8mm 11mm as catalog names. Buyers type the plain maxillary osteotome, or pterygoid osteotome.
Key design features
A curve toward the tip
Our photograph shows a flat bar that curves toward its tip, and the drawing beside it shows the curve from the side. The curve takes the edge round the back of the upper jaw from inside the mouth. Set behind the last molar, it meets the junction with the pterygoid plates face on.
One piece
The osteotome is one piece of steel, the blade and the bar together, with no separate handle. The force of the mallet goes straight down the bar to the edge. At the back of the jaw, where the bone is dense and the view is poor, a solid bar that does not flex is easier to control.
Two widths
The listing sells 8 and 11 mm, both at 28 dollars. The 8 mm fits the narrow space behind the last molar. The 11 mm spreads the cut across a wider junction. Gemini describes a double beveled 8 or 11 mm blade for this one.
A flared striking end
The bottom of the bar flares out into a striking end. The mallet meets that face, which is broad enough to take a square blow. The surgeon holds the bar with the curve set behind the jaw, and an assistant can strike while both of the surgeon’s hands stay on the instrument.
Which width to order
Two widths at one price, read off the variations on 4 November 2026. The guide below is ours. The listing gives no length.
| Width | Suits, our guide | Price |
|---|---|---|
| 8 mm | The narrow space behind the last molar | 28 dollars |
| 11 mm | A wider pterygomaxillary junction | 28 dollars |
Where it is used
AI Mode and Gemini, read on 4 November 2026, name these cases for the Obwegeser maxillary osteotome.
| Case | What it separates | Why this one |
|---|---|---|
| Le Fort I osteotomy | The pterygomaxillary junction | The curve reaches behind the jaw |
| Moving the upper jaw | The maxilla from the pterygoid plate | The one piece bar takes the mallet |
| Orthognathic surgery | The upper jaw before it is moved | Named by AI Mode |
| Work on the sinus walls | The walls of the maxillary sinus | Gemini names the sinus walls |
What it does, and what it must not do
The Obwegeser maxillary osteotome separates the back of the upper jaw. It cuts; it does not lever the jaw down.
| Job | Use the maxillary osteotome? | What to use instead or beside it |
|---|---|---|
| Separating the pterygomaxillary junction | Yes | This is the job it is made for |
| Dividing the nasal septum from the upper jaw | Beside it | The Obwegeser nasal septum osteotome |
| Long straight cuts along the Le Fort line | Beside it | The Obwegeser blade osteotome |
| Moving the freed jaw down | No | Disimpaction forceps |
| Levering on the teeth | Never | Nothing; the bar is not a lever |
How it compares with the rest of the osteotomes
Eleven maxillofacial osteotomes make up this family on our site. The working ends and handles are read off each listing’s own photograph, the options off the variations and the prices off the order form, on 4 November 2026. No listing gives a length, so none is printed.
| Osteotome | Working end, from our photograph | Handle, from our photograph | Options on the listing | Price |
|---|---|---|---|---|
| Dautrey-Munro | broad flat blade running the full length of a one piece bar | the bar itself, to a small flared striking end | 4, 6, 8, 10, 12, 14 or 16 mm | 22 dollars |
| Epker | long slim blade; drawings of straight, slightly and strongly curved tips | knurled lower grip, round flared striking end | 4, 6 or 8 mm by 1.2 mm, three curves | 20 dollars |
| Hargis | short, broad flat blade on a narrow neck | dark textured handle | 10 or 20 mm | 36 dollars |
| Obwegeser blade | flat blade on a narrow neck; drawings of four widths | brown handle with a metal end cap | 8, 12, 16 or 20 mm | 36 dollars |
| Obwegeser wedge | narrow flat blade on a neck; a thin tapered wedge in the drawing | brown handle with a metal end cap | 7 or 10 mm | 37 dollars |
| Obwegeser maxillary (this page) | one piece flat bar curving toward its tip | the bar itself, to a flared striking end | 8 or 11 mm | 28 dollars |
| Obwegeser nasal septum | forked tip, two prongs ending in small round knobs | long slim shaft to a square striking block | 4 or 6 mm | 33 dollars |
| Obwegeser alveolar process | narrow blade at the tip of a slim shaft | ridged handle | 3, 4 or 6.5 mm | 20 dollars |
| Obwegeser alveolar, one piece | very narrow blade on a slim one piece shaft | the shaft, ridged along its length | 2, 4 or 6.5 mm | 19 dollars |
| Marchac | slim straight blade; drawings of three widths | ridged handle with a round striking cap | 4, 6 or 8 mm, straight or curved | 23 dollars |
| Tessier graft calva | broad flat blade; square shoulders in the drawing | faceted shaft to a round flared striking plate | 10 or 15 mm, straight or curved | 33 dollars |
Materials and finish
Every Obwegeser maxillary osteotome we make is formed from high quality medical grade stainless steel. The steel itself is made to a German specification. We do not publish a grade number.
The Obwegeser maxillary osteotome has a plain steel finish. Look at the edge and the curve before each case. A curve that has been opened out will not reach behind the jaw, and that osteotome should be set aside.
Caring for it
Rinse the Obwegeser maxillary osteotome as soon as the case ends, before blood and bone dust dry on the blade. Brush the edge and the curve, wash it, dry it, and steam sterilize it on the normal cycle. Store it so the curve is not bent.
Ordering and wholesale
The Obwegeser maxillary osteotome is made by Adas Instruments in our own workshop and sold direct, which is why the price sits where it does against the catalog houses. Order one for a single tray, or in quantity for a hospital list or a distributor line. We do OEM work under your own brand and your own item numbers. Send us a sample and we will hold a run to your pattern rather than ours. Stock items ship from our own workshop. Backorder items take 10 to 12 working days to make. Every instrument carries a three year replacement warranty against manufacturing defects. Production is controlled under an ISO 13485 quality management system.
Frequently asked questions
What is the Obwegeser maxillary osteotome used for?
It separates the maxilla from the bones around it and from the pterygoid plate, naming the Le Fort I osteotomy, in AI Mode’s words. It is used in dental, plastic, ENT and oral and maxillofacial surgery. Ours is a curved one piece bar in 8 or 11 mm, at 28 dollars.
What is a maxillary osteotomy?
It is surgery that cuts the upper jaw free so it can be moved forward, back, up or down, then fixed in its new place. In the Le Fort I pattern the cut runs above the roots of the teeth, and the back of the jaw is separated with an osteotome like this one.
Why is the maxillary osteotome curved?
Because the junction it divides sits behind the upper jaw, round a corner from the mouth. The curve takes the edge behind the last molar so it meets the junction face on. A straight blade would meet the bone at the wrong angle.
Which maxillary osteotome width should I order?
The 8 mm fits the narrow space behind the last molar. The 11 mm spreads the cut across a wider junction. Both are 28 dollars, and an orthognathic tray can carry the pair, one for a narrow junction and one for a wide one.
Can it be autoclaved?
Yes. It is stainless steel with no coating, and it goes through the normal steam cycle with the rest of the tray. Brush the bone dust off the edge, dry it fully, and store it so the curve is not bent.
Related products and categories
Three more osteotomes from the same maxillofacial tray: the Obwegeser nasal septum osteotome, the Obwegeser osteotome for the alveolar process and the Obwegeser alveolar osteotome, one piece. The rest of the range is under maxillofacial instruments, which sits inside our ENT instruments.



Reviews
There are no reviews yet.