What the Obwegeser nasal septum osteotome is
The Obwegeser nasal septum osteotome is made to stay on the midline. The septum is a thin wall of bone and cartilage that divides the nose, and in a Le Fort operation or a septal repair its bony part has to be cut along its crest without the blade sliding off to either side. A fork that sits astride the septum holds the blade in place while the mallet drives it along.
Google AI Mode, read on 4 November 2026, describes the Obwegeser nasal septum osteotome as an instrument used in oral and maxillofacial surgery, plastic surgery and ENT. It names cutting and reshaping bone in nasal septum and orthognathic surgery, such as rhinoplasty and septoplasty. It describes a forked, two prong tip that stops the cutting surface from slipping and guides the tool down the midline.
Gemini, read the same day, places it in ENT, facial plastic and oral and maxillofacial surgery, on the bone of the septum, the vomer and the perpendicular plate of the ethmoid. It lists the forked septal osteotome, the guarded septum osteotome and the obwegeser nasal septum osteotome 4mm 6mm as catalog names. Buyers also type septal osteotome.
Key design features
A forked tip
Our photograph shows the tip split into two prongs, and the drawing beside it shows the fork from the front. The two prongs sit on each side of the septum. The cut is made between them, so the blade cannot wander off the wall it is cutting.
Round knobs on the prongs
Each prong ends in a small round knob, which the drawing shows clearly. The knobs ride along the sides of the septum as the osteotome is driven on. Being round, they slide over the lining of the nose instead of digging into it.
Two widths
The listing sells the fork in 4 and 6 mm, both at 33 dollars. The 4 mm suits a thin septum. The 6 mm straddles a thicker one, such as the base of the septum where it meets the crest of the upper jaw. In a Le Fort case both can sit on the tray, the thin one for the front of the septum and the wider one for its base.
A long shaft and a striking block
The shaft is long and slim and ends in a square striking block. The length reaches back along the septum from the front of the nose or from under the upper lip. The square block gives the mallet a broad, flat face. It also shows which way the fork faces, so the prongs can be set on each side of the septum without a look at the tip.
Which width to order
Two widths at one price, read off the variations on 4 November 2026. The guide below is ours. The listing gives no length.
| Width | Suits, our guide | Price |
|---|---|---|
| 4 mm | A thin septum | 33 dollars |
| 6 mm | A thicker septum at its base | 33 dollars |
Where it is used
AI Mode and Gemini, read on 4 November 2026, name these cases for the Obwegeser nasal septum osteotome.
| Case | What it cuts | Why this one |
|---|---|---|
| Le Fort and orthognathic surgery | The septum where it meets the upper jaw | The fork stays on the midline |
| Septoplasty | The bony septum | The knobs ride along its sides |
| Rhinoplasty | Bone of the septum and vomer | Named by AI Mode |
| Work on the ethmoid plate | The perpendicular plate | Gemini names it |
What it does, and what it must not do
The Obwegeser nasal septum osteotome cuts the septum along its crest. It is not a nasal osteotome for the side walls of the nose and not a lever.
| Job | Use the septum osteotome? | What to use instead or beside it |
|---|---|---|
| Cutting the bony septum along the midline | Yes | This is the job it is made for |
| Separating the back of the upper jaw | Beside it | The Obwegeser maxillary osteotome |
| Cutting the side walls of the nose | No | A nasal osteotome |
| Lifting the lining off the septum first | Beside it | A septum elevator |
| Twisting the septum | Never | Nothing; the fork is not a lever |
How it compares with the rest of the osteotomes
Eleven maxillofacial osteotomes make up this family on our site. The working ends and handles are read off each listing’s own photograph, the options off the variations and the prices off the order form, on 4 November 2026. No listing gives a length, so none is printed.
| Osteotome | Working end, from our photograph | Handle, from our photograph | Options on the listing | Price |
|---|---|---|---|---|
| Dautrey-Munro | broad flat blade running the full length of a one piece bar | the bar itself, to a small flared striking end | 4, 6, 8, 10, 12, 14 or 16 mm | 22 dollars |
| Epker | long slim blade; drawings of straight, slightly and strongly curved tips | knurled lower grip, round flared striking end | 4, 6 or 8 mm by 1.2 mm, three curves | 20 dollars |
| Hargis | short, broad flat blade on a narrow neck | dark textured handle | 10 or 20 mm | 36 dollars |
| Obwegeser blade | flat blade on a narrow neck; drawings of four widths | brown handle with a metal end cap | 8, 12, 16 or 20 mm | 36 dollars |
| Obwegeser wedge | narrow flat blade on a neck; a thin tapered wedge in the drawing | brown handle with a metal end cap | 7 or 10 mm | 37 dollars |
| Obwegeser maxillary | one piece flat bar curving toward its tip | the bar itself, to a flared striking end | 8 or 11 mm | 28 dollars |
| Obwegeser nasal septum (this page) | forked tip, two prongs ending in small round knobs | long slim shaft to a square striking block | 4 or 6 mm | 33 dollars |
| Obwegeser alveolar process | narrow blade at the tip of a slim shaft | ridged handle | 3, 4 or 6.5 mm | 20 dollars |
| Obwegeser alveolar, one piece | very narrow blade on a slim one piece shaft | the shaft, ridged along its length | 2, 4 or 6.5 mm | 19 dollars |
| Marchac | slim straight blade; drawings of three widths | ridged handle with a round striking cap | 4, 6 or 8 mm, straight or curved | 23 dollars |
| Tessier graft calva | broad flat blade; square shoulders in the drawing | faceted shaft to a round flared striking plate | 10 or 15 mm, straight or curved | 33 dollars |
Materials and finish
Every Obwegeser nasal septum osteotome we make is formed from high quality medical grade stainless steel. The steel itself is made to a German specification. We do not publish a grade number.
The Obwegeser nasal septum osteotome has a plain steel finish. Look at both prongs before each case. A prong that has been bent out of line will not sit on the septum, and that osteotome should be set aside.
Caring for it
Rinse the Obwegeser nasal septum osteotome as soon as the case ends, before blood dries between the prongs. Pass a fine brush through the fork and round the knobs, wash it, dry it, and steam sterilize it on the normal cycle with the rest of the tray.
Ordering and wholesale
The Obwegeser nasal septum osteotome is made by Adas Instruments in our own workshop and sold direct, which is why the price sits where it does against the catalog houses. Order one for a single tray, or in quantity for a hospital list or a distributor line. We do OEM work under your own brand and your own item numbers. Send us a sample and we will hold a run to your pattern rather than ours. Stock items ship from our own workshop. Backorder items take 10 to 12 working days to make. Every instrument carries a three year replacement warranty against manufacturing defects. Production is controlled under an ISO 13485 quality management system.
Frequently asked questions
What is the Obwegeser nasal septum osteotome used for?
It cuts and reshapes the bone of the nasal septum in oral and maxillofacial surgery, plastic surgery and ENT, naming septal and orthognathic work, in AI Mode’s words. Ours has a forked tip in 4 or 6 mm, at 33 dollars.
Why does the septum osteotome have a forked tip?
So it stays on the septum. The two prongs sit on each side of the thin wall of bone, and the cut is made between them. AI Mode says the fork keeps the cutting surface from slipping and guides the tool down the midline.
What are the round knobs on the septum osteotome for?
They ride along the sides of the septum as the osteotome is driven on. Being round, they slide over the lining of the nose instead of digging into it, which is what the drawing on our listing shows.
Is a forked septal osteotome the same instrument?
Gemini lists the forked septal osteotome and the guarded septum osteotome as catalog names for this pattern. Forked and guarded both describe the two prongs that hold the blade on the midline, so the names point at one design.
Can it be autoclaved?
Yes. It is stainless steel with no coating, and it goes through the normal steam cycle with the rest of the tray. Brush between the prongs, dry it fully, and store it so the fork is not bent.
Related products and categories
Three more osteotomes from the same maxillofacial tray: the Obwegeser osteotome for the alveolar process, the Obwegeser alveolar osteotome, one piece and the Marchac osteotome. The rest of the range is under maxillofacial instruments, which sits inside our ENT instruments.


Reviews
There are no reviews yet.