What the Marchac osteotome is
The Marchac osteotome is a slim osteotome for thin bone. In craniofacial work the bone of the skull and the face is cut, moved and reshaped, and in a child it can be thin enough to crack if it is struck with a heavy blade. A narrow, slim blade on a light shaft lets the surgeon cut that bone in small, controlled steps.
Google AI Mode, read on 4 November 2026, describes the Marchac osteotome as an instrument made for craniofacial, maxillofacial and plastic surgery, and names bone work on the back wall of the upper jaw. It describes a ridged handle with a rounded end that does not slip, and straight and curved forms for reaching round the bones of the face. That is what our listing sells.
Gemini, read the same day, places it in craniofacial, pediatric plastic and facial trauma surgery, on plates of the skull, the rim of the orbit and the craniofacial bone of children. It lists the Marchac craniofacial osteotome, the Marchac pediatric osteotome and the marchac osteotome 4mm 6mm 8mm as catalog names. Buyers who start wider type craniofacial osteotome.
Key design features
A slim blade on a slim shaft
Our photograph shows a slim blade on a slim shaft, and the drawings beside it show three straight blades of different widths. A slim blade cuts a narrow line through thin bone. It does not spread the bone apart as a thick one would, which is what keeps a thin plate of skull from splitting where it should not.
A ridged handle with a round cap
The handle is ridged and ends in a round striking cap. The ridges keep the fingers steady on a wet glove. The round cap takes the mallet, and AI Mode describes the same rounded end as what stops the hand slipping under force.
Straight or curved
The listing sells a straight and a curved tip in each width. The straight tip cuts where the bone runs ahead in a line. The curved tip reaches round the contour of the face, such as the rim of the orbit or the back wall of the upper jaw.
Three widths
The listing sells 4, 6 and 8 mm, all at 23 dollars, each straight or curved. That is six options at one price, so a craniofacial tray can carry the full run of widths in both tips.
Which width and tip to order
Six options at one price, read off the variations on 4 November 2026. The guide below is ours. The listing gives no length.
| Width | Straight tip suits | Curved tip suits | Price |
|---|---|---|---|
| 4 mm | Fine cuts in thin plates of the skull | The rim of the orbit | 23 dollars |
| 6 mm | General cuts on facial bone | The contour of the cheek | 23 dollars |
| 8 mm | Wider cuts on the skull | The back wall of the upper jaw | 23 dollars |
Where it is used
AI Mode and Gemini, read on 4 November 2026, name these cases for the Marchac osteotome.
| Case | What it cuts | Why this one |
|---|---|---|
| Craniofacial surgery | Plates of the skull | The slim blade suits thin bone |
| Pediatric plastic surgery | The craniofacial bone of children | Gemini names it |
| Work on the upper jaw | The back wall of the maxilla | Named by AI Mode |
| Facial trauma | The rim of the orbit | The curved tip follows the rim |
What it does, and what it must not do
The Marchac osteotome makes fine cuts in thin facial and cranial bone. It is not a heavy splitter and not a lever.
| Job | Use the Marchac? | What to use instead or beside it |
|---|---|---|
| Fine cuts in thin facial and cranial bone | Yes | This is the job it is made for |
| Harvesting a graft from the outer skull | Beside it | The Tessier graft calva osteotome |
| Splitting the thick ramus | No | The Hargis osteotome |
| Long straight cuts across the face | Beside it | The Obwegeser blade osteotome |
| Levering a bone flap | Never | Nothing; the slim blade is not a lever |
How it compares with the rest of the osteotomes
Eleven maxillofacial osteotomes make up this family on our site. The working ends and handles are read off each listing’s own photograph, the options off the variations and the prices off the order form, on 4 November 2026. No listing gives a length, so none is printed.
| Osteotome | Working end, from our photograph | Handle, from our photograph | Options on the listing | Price |
|---|---|---|---|---|
| Dautrey-Munro | broad flat blade running the full length of a one piece bar | the bar itself, to a small flared striking end | 4, 6, 8, 10, 12, 14 or 16 mm | 22 dollars |
| Epker | long slim blade; drawings of straight, slightly and strongly curved tips | knurled lower grip, round flared striking end | 4, 6 or 8 mm by 1.2 mm, three curves | 20 dollars |
| Hargis | short, broad flat blade on a narrow neck | dark textured handle | 10 or 20 mm | 36 dollars |
| Obwegeser blade | flat blade on a narrow neck; drawings of four widths | brown handle with a metal end cap | 8, 12, 16 or 20 mm | 36 dollars |
| Obwegeser wedge | narrow flat blade on a neck; a thin tapered wedge in the drawing | brown handle with a metal end cap | 7 or 10 mm | 37 dollars |
| Obwegeser maxillary | one piece flat bar curving toward its tip | the bar itself, to a flared striking end | 8 or 11 mm | 28 dollars |
| Obwegeser nasal septum | forked tip, two prongs ending in small round knobs | long slim shaft to a square striking block | 4 or 6 mm | 33 dollars |
| Obwegeser alveolar process | narrow blade at the tip of a slim shaft | ridged handle | 3, 4 or 6.5 mm | 20 dollars |
| Obwegeser alveolar, one piece | very narrow blade on a slim one piece shaft | the shaft, ridged along its length | 2, 4 or 6.5 mm | 19 dollars |
| Marchac (this page) | slim straight blade; drawings of three widths | ridged handle with a round striking cap | 4, 6 or 8 mm, straight or curved | 23 dollars |
| Tessier graft calva | broad flat blade; square shoulders in the drawing | faceted shaft to a round flared striking plate | 10 or 15 mm, straight or curved | 33 dollars |
Materials and finish
Every Marchac osteotome we make is formed from high quality medical grade stainless steel. The steel itself is made to a German specification. We do not publish a grade number.
The Marchac osteotome has a plain steel finish. Look along the slim blade before each case. A blade that has been used to lever bends, and a bent blade will not cut a straight line in thin bone, so that osteotome should be set aside.
Caring for it
Rinse the Marchac osteotome as soon as the case ends, before blood and bone dust dry on the blade and in the ridges of the handle. Brush both, wash it, dry it, and steam sterilize it on the normal cycle. Keep the straight and the curved tips apart on the tray.
Ordering and wholesale
The Marchac osteotome is made by Adas Instruments in our own workshop and sold direct, which is why the price sits where it does against the catalog houses. Order one for a single tray, or in quantity for a hospital list or a distributor line. We do OEM work under your own brand and your own item numbers. Send us a sample and we will hold a run to your pattern rather than ours. Stock items ship from our own workshop. Backorder items take 10 to 12 working days to make. Every instrument carries a three year replacement warranty against manufacturing defects. Production is controlled under an ISO 13485 quality management system.
Frequently asked questions
What is the Marchac osteotome used for?
It cuts and reshapes thin bone in craniofacial, maxillofacial and plastic surgery, naming work on the back wall of the upper jaw, in AI Mode’s words. Ours is 4, 6 or 8 mm, straight or curved, at 23 dollars.
Which Marchac width and tip should I order?
The 4 mm makes fine cuts in thin plates of the skull, and the 8 mm wider ones. Take the straight tip where the bone runs ahead in a line, and the curved tip for the rim of the orbit or the back of the upper jaw. All six options are 23 dollars.
Is the Marchac osteotome made for children?
Gemini lists the Marchac pediatric osteotome as a catalog name and names the craniofacial bone of children. The slim blade suits thin bone at any age. It is used on adults too, in craniofacial and facial trauma work.
How is it different from the Tessier graft calva osteotome?
Gemini puts it in the size. The Marchac has small 4, 6 or 8 mm tips on a slim shaft for cutting and recontouring thin bone. The Tessier graft calva osteotome is broader, at 10 or 15 mm, and shaves a graft from the outer skull.
Can it be autoclaved?
Yes. It is stainless steel with no coating, and it goes through the normal steam cycle with the rest of the tray. Brush the ridges of the handle clean, dry it fully, and store it so the slim blade is not bent.
Related products and categories
Three more osteotomes from the same maxillofacial tray: the Tessier graft calva osteotome, the Dautrey-Munro osteotome and the Epker osteotome. The rest of the range is under maxillofacial instruments, which sits inside our ENT instruments.




Reviews
There are no reviews yet.