What the Epker osteotome is
The Epker osteotome is the thin one. In a sagittal split of the lower jaw, the ramus is cut so that its outer and inner plates can be parted along their length, and the cut has to follow the bone round the angle of the jaw without wandering. A blade only 1.2 mm thick slips into a narrow saw cut and carries it on, and a curved one can follow the bone where a straight blade would meet it head on.
Google AI Mode, read on 4 November 2026, describes the Epker osteotome as an instrument used in craniomaxillofacial, oral, plastic and reconstructive and ENT surgery for cutting, shaping and working bone. It describes a narrow beveled blade about 1.2 mm thick, made straight, slightly curved and strongly curved, in 4, 6 and 8 mm, with a cross serrated grip for mallet work. That is what our listing sells.
Gemini, read the same day, places it in oral and maxillofacial and orthognathic surgery, on the ascending ramus, its cortical bone and the sagittal split. It lists the Epker ramus osteotome, the Epker orthognathic bone chisel and the epker osteotome 4mm 6mm 8mm as catalog names. Buyers who do not know the name type sagittal split osteotome.
Key design features
A blade 1.2 mm thick
Every option on the listing is 1.2 mm thick. A thin blade follows a saw cut that is already started, instead of opening a new one beside it. That keeps the split on the line the surgeon planned.
Three curves
The drawings on our photograph show three tips: straight, slightly curved and strongly curved. The straight one works where the bone runs straight ahead. The curves follow the ramus as it bends toward the angle of the jaw, and Gemini names the angle as the reason for them.
Three widths
The listing sells 4, 6 and 8 mm, each in all three curves, all at 20 dollars. That is nine options at one price, so a sagittal split tray can carry the full run of widths and curves.
A knurled grip and a flared end
Our photograph shows a long slim shaft, knurled on its lower part, ending in a round flared striking end. The knurling holds the fingers on a wet glove between blows. The flared end takes the mallet, and AI Mode describes the same cross serrated grip.
Which width and curve to order
Nine options at one price, read off the variations on 4 November 2026. The guide to each curve is ours. The listing gives no length.
| Curve | Widths | Suits, our guide | Price |
|---|---|---|---|
| Straight | 4, 6 or 8 mm by 1.2 mm | Carrying a cut straight down the ramus | 20 dollars |
| Slightly curved | 4, 6 or 8 mm by 1.2 mm | Following the ramus as it begins to bend | 20 dollars |
| Strongly curved | 4, 6 or 8 mm by 1.2 mm | Working round the angle of the jaw | 20 dollars |
Where it is used
AI Mode and Gemini, read on 4 November 2026, name these cases for the Epker osteotome.
| Case | What it cuts | Why this one |
|---|---|---|
| Sagittal split of the ramus | The split between the outer and inner plates | The 1.2 mm blade follows the saw cut |
| Work at the angle of the jaw | Bone round the angle | The curved blades follow the bend |
| Orthognathic surgery | Cortical bone of the ramus | Three widths for each step |
| Plastic and ENT surgery | Bone that is cut or shaped | Named by AI Mode |
What it does, and what it must not do
The Epker osteotome carries a thin cut through bone under the mallet. It is not a lever and not a spreader.
| Job | Use the Epker? | What to use instead or beside it |
|---|---|---|
| Carrying a sagittal split along the ramus | Yes | This is the job it is made for |
| Splitting thick bone along the body of the jaw | Beside it | The Hargis osteotome |
| Long straight cuts across the face | Beside it | The Obwegeser blade osteotome |
| Opening the split once it is cut | No | A sagittal split separator |
| Levering the plates apart | Never | A separator, not the thin blade |
How it compares with the rest of the osteotomes
Eleven maxillofacial osteotomes make up this family on our site. The working ends and handles are read off each listing’s own photograph, the options off the variations and the prices off the order form, on 4 November 2026. No listing gives a length, so none is printed.
| Osteotome | Working end, from our photograph | Handle, from our photograph | Options on the listing | Price |
|---|---|---|---|---|
| Dautrey-Munro | broad flat blade running the full length of a one piece bar | the bar itself, to a small flared striking end | 4, 6, 8, 10, 12, 14 or 16 mm | 22 dollars |
| Epker (this page) | long slim blade; drawings of straight, slightly and strongly curved tips | knurled lower grip, round flared striking end | 4, 6 or 8 mm by 1.2 mm, three curves | 20 dollars |
| Hargis | short, broad flat blade on a narrow neck | dark textured handle | 10 or 20 mm | 36 dollars |
| Obwegeser blade | flat blade on a narrow neck; drawings of four widths | brown handle with a metal end cap | 8, 12, 16 or 20 mm | 36 dollars |
| Obwegeser wedge | narrow flat blade on a neck; a thin tapered wedge in the drawing | brown handle with a metal end cap | 7 or 10 mm | 37 dollars |
| Obwegeser maxillary | one piece flat bar curving toward its tip | the bar itself, to a flared striking end | 8 or 11 mm | 28 dollars |
| Obwegeser nasal septum | forked tip, two prongs ending in small round knobs | long slim shaft to a square striking block | 4 or 6 mm | 33 dollars |
| Obwegeser alveolar process | narrow blade at the tip of a slim shaft | ridged handle | 3, 4 or 6.5 mm | 20 dollars |
| Obwegeser alveolar, one piece | very narrow blade on a slim one piece shaft | the shaft, ridged along its length | 2, 4 or 6.5 mm | 19 dollars |
| Marchac | slim straight blade; drawings of three widths | ridged handle with a round striking cap | 4, 6 or 8 mm, straight or curved | 23 dollars |
| Tessier graft calva | broad flat blade; square shoulders in the drawing | faceted shaft to a round flared striking plate | 10 or 15 mm, straight or curved | 33 dollars |
Materials and finish
Every Epker osteotome we make is formed from high quality medical grade stainless steel. The steel itself is made to a German specification. We do not publish a grade number.
The Epker osteotome has a plain steel finish. A blade 1.2 mm thick bends if it is used to lever, so look along it before each case. A blade that is no longer true will not follow a saw cut, and that osteotome should be set aside.
Caring for it
Rinse the Epker osteotome as soon as the case ends, before blood and bone dust dry on the blade and in the knurling. Brush the blade and grip, wash it, dry it, and steam sterilize it on the normal cycle. Keep the nine options in order, and the curves apart, so the right one is picked up.
Ordering and wholesale
The Epker osteotome is made by Adas Instruments in our own workshop and sold direct, which is why the price sits where it does against the catalog houses. Order one for a single tray, or in quantity for a hospital list or a distributor line. We do OEM work under your own brand and your own item numbers. Send us a sample and we will hold a run to your pattern rather than ours. Stock items ship from our own workshop. Backorder items take 10 to 12 working days to make. Every instrument carries a three year replacement warranty against manufacturing defects. Production is controlled under an ISO 13485 quality management system.
Frequently asked questions
What is the Epker osteotome used for?
It cuts, shapes and works bone in craniomaxillofacial, oral, plastic and reconstructive and ENT surgery. Gemini names the sagittal split of the ramus. Ours is 4, 6 or 8 mm by 1.2 mm, straight, slightly curved or strongly curved, at 20 dollars.
Which Epker curve should I order?
The straight blade carries a cut straight down the ramus. The slightly curved one follows the ramus as it begins to bend, and the strongly curved one works round the angle of the jaw. All nine options are 20 dollars.
Why is the Epker blade only 1.2 mm thick?
So that it follows a saw cut that is already started. A thin blade slips into the cut and carries it on without opening a second line beside it, which keeps the split where the surgeon planned it on the ramus.
How is it different from an Obwegeser osteotome?
Gemini puts it in the blade. The Epker has a thin 1.2 mm working tip in three curves for the angle of the jaw. The Obwegeser blade osteotome on our site is wider, from 8 to 20 mm, for long straight cuts.
Can it be autoclaved?
Yes. The Epker osteotome is stainless steel with no coating, and it goes through the normal steam cycle with the rest of the tray. Brush the knurling clean, dry it fully, and store it flat so the thin blade is not bent.
Related products and categories
Three more osteotomes from the same maxillofacial tray: the Hargis osteotome, the Obwegeser blade osteotome and the Obwegeser wedge osteotome. The rest of the range is under maxillofacial instruments, which sits inside our ENT instruments.



Reviews
There are no reviews yet.