What the Obwegeser blade osteotome is
The Obwegeser blade osteotome is the broad cutter of the orthognathic tray. When a jaw is moved, the bone is divided along lines planned before the operation, and some of those lines are long and straight. A wide, flat blade carries such a cut in fewer blows than a narrow one, and keeps it running straight because the whole width of the edge bears on the bone at once.
Google AI Mode, read on 4 November 2026, describes the Obwegeser blade osteotome as a surgical instrument used in oral and maxillofacial, plastic and ENT surgery, for controlled bone cutting when the lower and upper jaws are repositioned. It names the sagittal split ramus osteotomy, and describes blade widths of 8, 10, 12, 16 and 20 mm. Ours comes in four of those: 8, 12, 16 and 20 mm.
Gemini, read the same day, places it in oral and maxillofacial, orthognathic and plastic surgery, on Le Fort osteotomy lines, broad planes of the lower jaw and the bone of the midface. It lists the flat blade osteotome, the maxillofacial blade osteotome and the obwegeser blade osteotome 8mm 12mm 16mm 20mm as catalog names. Buyers who start wider type surgical osteotome.
Key design features
A flat blade on a narrow neck
Our photograph shows a flat blade on a narrow neck above the handle. The neck keeps the hand back from the bone and leaves the surgeon a clear view of the edge. The flat blade lays the cut down along its full width.
Four widths
The listing sells 8, 12, 16 and 20 mm, all at 36 dollars, and the drawings on the listing show all four. The 8 mm starts a cut or works in a tight space. The 20 mm carries the long straight cuts Gemini describes across the broad bone of the face.
A handle with a metal end cap
The handle in our photograph is brown, with a metal cap at its end. The mallet strikes the cap, not the handle. AI Mode describes a metal impacting platform or a fiber handle for this pattern, and ours has both, a handle to hold and a cap to strike.
A side view in the drawing
The side view in the drawing shows a thin blade. A thin flat blade enters a saw cut and carries it on, so the cut stays on its planned line from the first blow to the last.
Which width to order
Four widths at one price, read off the variations on 4 November 2026. The guide below is ours. The listing gives no length.
| Width | Suits, our guide | Price |
|---|---|---|
| 8 mm | Starting a cut, or a tight space | 36 dollars |
| 12 mm | General cuts on the ramus | 36 dollars |
| 16 mm | Long cuts along the Le Fort lines | 36 dollars |
| 20 mm | Broad planes of the lower jaw | 36 dollars |
Where it is used
AI Mode and Gemini, read on 4 November 2026, name these cases for the Obwegeser blade osteotome.
| Case | What it cuts | Why this one |
|---|---|---|
| Sagittal split ramus osteotomy | The ramus of the lower jaw | Named by AI Mode |
| Le Fort osteotomy | The planned lines of the upper jaw | The flat blade runs straight |
| Lower jaw repositioning | Broad planes of the lower jaw | The 20 mm covers more at a blow |
| Midface surgery | Bone of the midface | Four widths for each step |
What it does, and what it must not do
The Obwegeser blade osteotome makes long, straight cuts through bone under the mallet. It is not a lever and not a splitter.
| Job | Use the blade osteotome? | What to use instead or beside it |
|---|---|---|
| Long straight cuts through bone | Yes | This is the job it is made for |
| Carrying a thin cut round the angle of the jaw | Beside it | The Epker osteotome |
| Wedging a split open | Beside it | The Obwegeser wedge osteotome |
| Cutting the alveolar bone round the teeth | Beside it | An Obwegeser alveolar osteotome |
| Levering bone apart | Never | A bone spreader or separator |
How it compares with the rest of the osteotomes
Eleven maxillofacial osteotomes make up this family on our site. The working ends and handles are read off each listing’s own photograph, the options off the variations and the prices off the order form, on 4 November 2026. No listing gives a length, so none is printed.
| Osteotome | Working end, from our photograph | Handle, from our photograph | Options on the listing | Price |
|---|---|---|---|---|
| Dautrey-Munro | broad flat blade running the full length of a one piece bar | the bar itself, to a small flared striking end | 4, 6, 8, 10, 12, 14 or 16 mm | 22 dollars |
| Epker | long slim blade; drawings of straight, slightly and strongly curved tips | knurled lower grip, round flared striking end | 4, 6 or 8 mm by 1.2 mm, three curves | 20 dollars |
| Hargis | short, broad flat blade on a narrow neck | dark textured handle | 10 or 20 mm | 36 dollars |
| Obwegeser blade (this page) | flat blade on a narrow neck; drawings of four widths | brown handle with a metal end cap | 8, 12, 16 or 20 mm | 36 dollars |
| Obwegeser wedge | narrow flat blade on a neck; a thin tapered wedge in the drawing | brown handle with a metal end cap | 7 or 10 mm | 37 dollars |
| Obwegeser maxillary | one piece flat bar curving toward its tip | the bar itself, to a flared striking end | 8 or 11 mm | 28 dollars |
| Obwegeser nasal septum | forked tip, two prongs ending in small round knobs | long slim shaft to a square striking block | 4 or 6 mm | 33 dollars |
| Obwegeser alveolar process | narrow blade at the tip of a slim shaft | ridged handle | 3, 4 or 6.5 mm | 20 dollars |
| Obwegeser alveolar, one piece | very narrow blade on a slim one piece shaft | the shaft, ridged along its length | 2, 4 or 6.5 mm | 19 dollars |
| Marchac | slim straight blade; drawings of three widths | ridged handle with a round striking cap | 4, 6 or 8 mm, straight or curved | 23 dollars |
| Tessier graft calva | broad flat blade; square shoulders in the drawing | faceted shaft to a round flared striking plate | 10 or 15 mm, straight or curved | 33 dollars |
Materials and finish
Every Obwegeser blade osteotome we make is formed from high quality medical grade stainless steel. The steel itself is made to a German specification. We do not publish a grade number.
The Obwegeser blade osteotome has a plain steel blade and a metal end cap. Look along the edge before each case. A nicked or rolled edge tears a straight cut off its line, and that osteotome should be set aside.
Caring for it
Rinse the Obwegeser blade osteotome as soon as the case ends, before blood and bone dust dry on the blade and at the joint of the handle. Brush both, wash it, dry it, and steam sterilize it on the normal cycle. Keep the four widths in order on the tray.
Ordering and wholesale
The Obwegeser blade osteotome is made by Adas Instruments in our own workshop and sold direct, which is why the price sits where it does against the catalog houses. Order one for a single tray, or in quantity for a hospital list or a distributor line. We do OEM work under your own brand and your own item numbers. Send us a sample and we will hold a run to your pattern rather than ours. Stock items ship from our own workshop. Backorder items take 10 to 12 working days to make. Every instrument carries a three year replacement warranty against manufacturing defects. Production is controlled under an ISO 13485 quality management system.
Frequently asked questions
What is the Obwegeser blade osteotome used for?
It makes controlled cuts through bone when the lower and upper jaws are repositioned, in oral and maxillofacial, plastic and ENT surgery. AI Mode names the sagittal split ramus osteotomy. Ours is 8, 12, 16 or 20 mm, at 36 dollars.
What is the purpose of an osteotome?
An osteotome cuts bone. Its edge is set on the bone and the end is struck with a mallet, so the cut goes where the surgeon aims it. In jaw surgery it divides the bone along lines planned before the operation, so a jaw can be moved.
Which blade osteotome width should I order?
The 8 mm starts a cut or works in a tight space, and the 12 mm suits general cuts on the ramus. The 16 and 20 mm carry long straight cuts along the Le Fort lines and across the lower jaw. All four are 36 dollars.
How is the blade osteotome different from the wedge osteotome?
The blade osteotome has a thin, flat blade that cuts a line of one width. The Obwegeser wedge osteotome thickens behind its edge, so it opens the gap as it is driven in. One cuts, the other spreads.
Can it be autoclaved?
Yes. It goes through the normal steam cycle with the rest of the tray. Brush the joint where the blade meets the handle, dry it fully, and store it so the edge does not knock against other instruments.
Related products and categories
Three more osteotomes from the same maxillofacial tray: the Obwegeser wedge osteotome, the Obwegeser maxillary osteotome and the Obwegeser nasal septum osteotome. The rest of the range is under maxillofacial instruments, which sits inside our ENT instruments.



Reviews
There are no reviews yet.