What the Obwegeser wedge osteotome is
The Obwegeser wedge osteotome cuts and opens in one movement. A flat osteotome leaves a cut of its own thickness. A wedge thickens behind its edge, so as it is driven in, the bone on each side of the cut is pressed apart. In a split of the lower jaw, or a cut through the chin that is to be opened, that spreading is the point.
Google AI Mode, read on 4 November 2026, describes the Obwegeser wedge osteotome as a reusable surgical instrument used for splitting the lower jaw, shaping bone and delivering a controlled cut during orthognathic and corrective facial bone surgery. It places it in oral and maxillofacial, plastic, ENT and orthopedic surgery, and describes a straight, beveled blade made for wedging.
Gemini, read the same day, places it in oral and maxillofacial and orthognathic surgery, on wedges of cortical bone, chin osteotomy sites and the gaps opened for grafts. It lists the interpositional wedge osteotome, the genioplasty osteotome and the obwegeser wedge osteotome 7mm 10mm as catalog names. Buyers type the plain wedge osteotome.
Key design features
A tapered wedge
The drawing on our listing shows the blade from the side, thin at the edge and thickening back from it. That is the wedge. The edge enters the cut, and the thicker part behind it opens the bone as the blade goes deeper.
A narrow flat blade on a neck
Our photograph shows a narrow flat blade on a neck above the handle. The neck keeps the hand clear of the bone, so the surgeon can see the edge go into the cut. A narrow blade suits the tight lines of a jaw split and a chin osteotomy, where there is little room beside the cut for a broad blade to sit.
Two widths
The listing sells the wedge in 7 and 10 mm, both at 37 dollars. The 7 mm opens a narrow cut. The 10 mm spreads a wider one, such as a chin cut that is to take a graft between its halves, which Gemini names as an interpositional gap. A tray for chin and jaw work can carry the pair, so the narrow wedge starts the opening and the wide one finishes it without a change of grip.
A handle with a metal end cap
The handle in our photograph is brown, with a metal cap at its end. Driving a wedge takes steady blows, and the cap takes the mallet while the hand holds the blade on its line.
Which width to order
Two widths at one price, read off the variations on 4 November 2026. The guide below is ours. The listing gives no length.
| Width | Suits, our guide | Price |
|---|---|---|
| 7 mm | Opening a narrow cut in a jaw split | 37 dollars |
| 10 mm | Spreading a wider cut, such as a chin osteotomy | 37 dollars |
Where it is used
AI Mode and Gemini, read on 4 November 2026, name these cases for the Obwegeser wedge osteotome.
| Case | What it opens | Why this one |
|---|---|---|
| Splitting the lower jaw | The cut through the jaw | The wedge spreads as it cuts |
| Genioplasty | A cut through the chin | The 10 mm opens it wider |
| Interpositional graft | A gap for a bone graft | Gemini names the gap |
| Corrective facial bone surgery | Bone that is shaped | Named by AI Mode |
What it does, and what it must not do
The Obwegeser wedge osteotome cuts and opens bone along a planned line. It is not a long straight cutter and not a lever.
| Job | Use the wedge osteotome? | What to use instead or beside it |
|---|---|---|
| Opening a cut as it is driven in | Yes | This is the job it is made for |
| Long straight cuts of one width | Beside it | The Obwegeser blade osteotome |
| Splitting the ramus in a sagittal split | Beside it | The Hargis osteotome |
| Holding the gap open once it is made | No | A spreader or the graft itself |
| Prying bone by the handle | Never | A bone spreader |
How it compares with the rest of the osteotomes
Eleven maxillofacial osteotomes make up this family on our site. The working ends and handles are read off each listing’s own photograph, the options off the variations and the prices off the order form, on 4 November 2026. No listing gives a length, so none is printed.
| Osteotome | Working end, from our photograph | Handle, from our photograph | Options on the listing | Price |
|---|---|---|---|---|
| Dautrey-Munro | broad flat blade running the full length of a one piece bar | the bar itself, to a small flared striking end | 4, 6, 8, 10, 12, 14 or 16 mm | 22 dollars |
| Epker | long slim blade; drawings of straight, slightly and strongly curved tips | knurled lower grip, round flared striking end | 4, 6 or 8 mm by 1.2 mm, three curves | 20 dollars |
| Hargis | short, broad flat blade on a narrow neck | dark textured handle | 10 or 20 mm | 36 dollars |
| Obwegeser blade | flat blade on a narrow neck; drawings of four widths | brown handle with a metal end cap | 8, 12, 16 or 20 mm | 36 dollars |
| Obwegeser wedge (this page) | narrow flat blade on a neck; a thin tapered wedge in the drawing | brown handle with a metal end cap | 7 or 10 mm | 37 dollars |
| Obwegeser maxillary | one piece flat bar curving toward its tip | the bar itself, to a flared striking end | 8 or 11 mm | 28 dollars |
| Obwegeser nasal septum | forked tip, two prongs ending in small round knobs | long slim shaft to a square striking block | 4 or 6 mm | 33 dollars |
| Obwegeser alveolar process | narrow blade at the tip of a slim shaft | ridged handle | 3, 4 or 6.5 mm | 20 dollars |
| Obwegeser alveolar, one piece | very narrow blade on a slim one piece shaft | the shaft, ridged along its length | 2, 4 or 6.5 mm | 19 dollars |
| Marchac | slim straight blade; drawings of three widths | ridged handle with a round striking cap | 4, 6 or 8 mm, straight or curved | 23 dollars |
| Tessier graft calva | broad flat blade; square shoulders in the drawing | faceted shaft to a round flared striking plate | 10 or 15 mm, straight or curved | 33 dollars |
Materials and finish
Every Obwegeser wedge osteotome we make is formed from high quality medical grade stainless steel. The steel itself is made to a German specification. We do not publish a grade number.
The Obwegeser wedge osteotome has a plain steel blade and a metal end cap. Look along the edge and the taper before each case. A wedge that has been used to pry bends at the neck, and a bent neck will not drive straight, so that osteotome should be set aside.
Caring for it
Rinse the Obwegeser wedge osteotome as soon as the case ends, before blood and bone dust dry on the blade and at the joint of the handle. Brush both, wash it, dry it, and steam sterilize it on the normal cycle with the rest of the tray.
Ordering and wholesale
The Obwegeser wedge osteotome is made by Adas Instruments in our own workshop and sold direct, which is why the price sits where it does against the catalog houses. Order one for a single tray, or in quantity for a hospital list or a distributor line. We do OEM work under your own brand and your own item numbers. Send us a sample and we will hold a run to your pattern rather than ours. Stock items ship from our own workshop. Backorder items take 10 to 12 working days to make. Every instrument carries a three year replacement warranty against manufacturing defects. Production is controlled under an ISO 13485 quality management system.
Frequently asked questions
What is the Obwegeser wedge osteotome used for?
It splits the lower jaw, shapes bone and makes a controlled cut during orthognathic and corrective facial bone surgery. Gemini adds the chin and the gaps opened for grafts. Ours is 7 or 10 mm, at 37 dollars.
Why is the wedge osteotome tapered?
Because it is meant to open the cut. The blade is thin at the edge and thickens behind it, so as it is driven in the bone on each side is pressed apart. Gemini describes a wedge shaped tip that expands the gap as it cuts.
Which wedge width should I order?
The 7 mm opens a narrow cut in a jaw split. The 10 mm spreads a wider one, such as a chin osteotomy that is to take a graft. Both are 37 dollars, and a chin and jaw tray can carry the pair.
Is a genioplasty osteotome the same instrument?
Gemini lists the genioplasty osteotome and the interpositional wedge osteotome as catalog names for this pattern. Genioplasty is surgery of the chin, and the wedge is used there to open the cut for a graft.
Can it be autoclaved?
Yes. It goes through the normal steam cycle with the rest of the tray. Brush the joint where the blade meets the handle, dry it fully, and store it so the edge does not knock against other instruments.
Related products and categories
Three more osteotomes from the same maxillofacial tray: the Obwegeser maxillary osteotome, the Obwegeser nasal septum osteotome and the Obwegeser osteotome for the alveolar process. The rest of the range is under maxillofacial instruments, which sits inside our ENT instruments.


Reviews
There are no reviews yet.