What the Dautrey Munro osteotome is
The Dautrey Munro osteotome is the plainest osteotome on the maxillofacial tray: a single flat bar of steel with the edge at one end and a striking face at the other. There is no separate handle to work loose and no joint to flex, so each blow of the mallet goes straight down the bar to the edge. That makes it a good tool for the steady, measured cuts that shape and divide facial bone.
Google AI Mode, read on 4 November 2026, describes the Dautrey Munro osteotome as an orthopedic and maxillofacial instrument for the controlled cutting, scraping, contouring and dividing of bone. It places it in ENT, oral and maxillofacial, plastic and orthopedic surgery, and in craniofacial and osteotomy work. It gives blade widths from 4 to 16 mm, which is the range our listing sells.
Gemini, read the same day, places it in oral and maxillofacial, pediatric craniofacial and orthognathic surgery, on osteotomy sites in the lower jaw, the cortical bone of the ramus and the bone of the midface. It lists the dautrey munro bone chisel and the dautrey munro osteotome 4mm to 16mm as catalog names. Buyers who start wider type osteotome surgical instrument, or straight osteotome.
Key design features
A one piece flat bar
Our photograph shows a single flat bar, with the blade running the full length of it and no separate handle. The fingers hold the bar itself. With nothing between the striking end and the edge, the force of the mallet arrives at the bone without being soaked up by a handle.
A broad, parallel sided blade
The blade is broad and its sides run parallel, and the drawing beside it shows the thin side profile. A parallel blade cuts a channel of one width all the way down, so the cut the surgeon starts is the cut that is finished.
Seven widths, one price
The listing sells the Dautrey Munro osteotome in 4, 6, 8, 10, 12, 14 and 16 mm, all at 22 dollars. The narrow widths start a cut or work in a tight space. The wide ones divide or shave a broad face of bone with fewer strokes. A full tray carries the seven in order, so the width can be changed between steps without leaving the line of the cut.
A flared striking end
The bottom end flares out a little into a small striking face. The mallet meets that face, not the fingers. A clean, square face takes the blow evenly, so the edge goes in straight instead of skating off to one side.
Which width to order
Seven widths at one price, read off the variations on 4 November 2026. The guide below is ours. The listing gives no length, so ask us before you build a tray around it.
| Width | Suits, our guide | Price |
|---|---|---|
| 4 mm | Starting a cut, or a tight space | 22 dollars |
| 6 mm | Narrow cuts in the midface | 22 dollars |
| 8 mm | General cuts on the ramus | 22 dollars |
| 10 mm | Dividing bone of middle thickness | 22 dollars |
| 12 mm | Wider cuts on the body of the jaw | 22 dollars |
| 14 mm | Contouring a broad face of bone | 22 dollars |
| 16 mm | Shaving the widest faces of bone | 22 dollars |
Where it is used
AI Mode and Gemini, read on 4 November 2026, name these cases for the Dautrey Munro osteotome.
| Case | What it cuts | Why this one |
|---|---|---|
| Orthognathic surgery | Osteotomy lines in the lower jaw | The one piece bar takes the mallet |
| Craniofacial surgery | Bone of the midface | Seven widths for each step |
| Contouring | A face of bone that is shaved down | The broad blade covers more at a stroke |
| ENT and plastic surgery | Bone that is divided or scraped | Named by AI Mode |
What it does, and what it must not do
The Dautrey Munro osteotome cuts, shaves and divides bone under the mallet. It is not a lever and it is not a periosteal elevator.
| Job | Use the Dautrey Munro? | What to use instead or beside it |
|---|---|---|
| Cutting or contouring bone with a mallet | Yes | This is the job it is made for |
| Splitting the ramus in a sagittal split | Beside it | The Epker or the Hargis osteotome |
| Cutting the alveolar bone round the teeth | Beside it | An Obwegeser alveolar osteotome |
| Lifting periosteum off the bone first | No | A periosteal elevator |
| Levering bone apart | Never | A bone spreader or a separator |
How it compares with the rest of the osteotomes
Eleven maxillofacial osteotomes make up this family on our site. The working ends and handles are read off each listing’s own photograph, the options off the variations and the prices off the order form, on 4 November 2026. No listing gives a length, so none is printed.
| Osteotome | Working end, from our photograph | Handle, from our photograph | Options on the listing | Price |
|---|---|---|---|---|
| Dautrey-Munro (this page) | broad flat blade running the full length of a one piece bar | the bar itself, to a small flared striking end | 4, 6, 8, 10, 12, 14 or 16 mm | 22 dollars |
| Epker | long slim blade; drawings of straight, slightly and strongly curved tips | knurled lower grip, round flared striking end | 4, 6 or 8 mm by 1.2 mm, three curves | 20 dollars |
| Hargis | short, broad flat blade on a narrow neck | dark textured handle | 10 or 20 mm | 36 dollars |
| Obwegeser blade | flat blade on a narrow neck; drawings of four widths | brown handle with a metal end cap | 8, 12, 16 or 20 mm | 36 dollars |
| Obwegeser wedge | narrow flat blade on a neck; a thin tapered wedge in the drawing | brown handle with a metal end cap | 7 or 10 mm | 37 dollars |
| Obwegeser maxillary | one piece flat bar curving toward its tip | the bar itself, to a flared striking end | 8 or 11 mm | 28 dollars |
| Obwegeser nasal septum | forked tip, two prongs ending in small round knobs | long slim shaft to a square striking block | 4 or 6 mm | 33 dollars |
| Obwegeser alveolar process | narrow blade at the tip of a slim shaft | ridged handle | 3, 4 or 6.5 mm | 20 dollars |
| Obwegeser alveolar, one piece | very narrow blade on a slim one piece shaft | the shaft, ridged along its length | 2, 4 or 6.5 mm | 19 dollars |
| Marchac | slim straight blade; drawings of three widths | ridged handle with a round striking cap | 4, 6 or 8 mm, straight or curved | 23 dollars |
| Tessier graft calva | broad flat blade; square shoulders in the drawing | faceted shaft to a round flared striking plate | 10 or 15 mm, straight or curved | 33 dollars |
Materials and finish
Every Dautrey Munro osteotome we make is formed from high quality medical grade stainless steel. The steel itself is made to a German specification. We do not publish a grade number.
The Dautrey Munro osteotome has a plain steel finish. Look along the edge before each case. A nicked or rolled edge bruises bone instead of cutting it, and an osteotome with a mushroomed striking end should be set aside.
Caring for it
Rinse the Dautrey Munro osteotome as soon as the case ends, before blood and bone dust dry on the blade. Brush the edge and the bar, wash it, dry it, and steam sterilize it on the normal cycle. Keep the seven widths in order on the tray, and do not let the edges knock against other steel.
Ordering and wholesale
The Dautrey Munro osteotome is made by Adas Instruments in our own workshop and sold direct, which is why the price sits where it does against the catalog houses. Order one for a single tray, or in quantity for a hospital list or a distributor line. We do OEM work under your own brand and your own item numbers. Send us a sample and we will hold a run to your pattern rather than ours. Stock items ship from our own workshop. Backorder items take 10 to 12 working days to make. Every instrument carries a three year replacement warranty against manufacturing defects. Production is controlled under an ISO 13485 quality management system.
Frequently asked questions
What is the Dautrey Munro osteotome used for?
It cuts, scrapes, contours and divides bone in ENT, oral and maxillofacial, plastic and orthopedic surgery. The edge is set on the bone and the end is struck with a mallet. Ours is a one piece flat bar in seven widths from 4 to 16 mm, at 22 dollars.
Which Dautrey Munro osteotome width should I order?
The 4 and 6 mm start a cut or work in a tight space in the midface. The 8 to 12 mm suit general cuts on the ramus and the body of the jaw. The 14 and 16 mm shave the widest faces of bone. Every width is 22 dollars.
Is a Dautrey Munro bone chisel the same instrument?
Gemini lists the Dautrey Munro bone chisel as a catalog name for it. The two words overlap in the trade, but an osteotome in the strict sense is beveled on both faces, and AI Mode describes a double beveled edge for this one.
How long is the Dautrey Munro osteotome?
The listing does not give a length, and we do not print a figure we have not measured. Ask us before you order and we will give you the measured length of the width you want, so it can be checked against your tray.
Can it be autoclaved?
Yes. It is stainless steel with no coating, and it goes through the normal steam cycle with the rest of the tray. Brush the bone dust off the edge first, dry it fully, and store it so the edge is protected.
Related products and categories
Three more osteotomes from the same maxillofacial tray: the Epker osteotome, the Hargis osteotome and the Obwegeser blade osteotome. The rest of the range is under maxillofacial instruments, which sits inside our ENT instruments.




Reviews
There are no reviews yet.