What the Obwegeser periosteal elevator is
The Obwegeser periosteal elevator is the everyday elevator of jaw surgery. Every operation on the upper or lower jaw starts by lifting the periosteum off the bone, to see the fracture, the osteotomy line or the place where a plate will sit. A rounded blade is the general purpose shape for that work. With two widths on one instrument, the same elevator lifts a narrow strip at the start and a broad area once the flap is open.
Google AI Mode, read on 4 November 2026, describes the Obwegeser periosteal elevator as an instrument for craniomaxillofacial, oral and plastic surgery, used to strip and lift the periosteum away from bone such as the lower and upper jaw. In its words, the blade is slightly curved, so it follows the contours of the bone as the fibrous tissue is separated.
Gemini, read the same day, places it in oral and maxillofacial, orthognathic and facial reconstructive surgery, on the periosteum of both jaws and the planes under it. It lists the Obwegeser double ended periosteal stripper and the obwegeser periosteal elevator double ended as catalog names. Buyers type the short obwegeser elevator, and the full obwegeser periosteal elevator 20cm.
Key design features
A rounded blade at each end
Our photograph shows a rounded, spoon shaped blade at each end. A rounded blade has no corner to dig into the bone or catch the tissue. It slides under the periosteum and lifts it evenly, which is why it is the shape for general work over both jaws.
Two widths on one instrument
One blade is wider than the other in our photograph. The narrow end starts the lift at the edge of an incision. The wide end then clears the broader area once the flap is open, without a change of instrument. Gemini puts this as its difference from a single ended Obwegeser.
Twenty centimeters
At 20 cm either end can reach the back of the mouth or the far side of a facial incision while the other end lies in the palm. The length gives room for a long, even stroke under the periosteum instead of a series of short pushes. That is the length of the Freer and the J-stripper in this family too, so the three sit even on the tray.
A knurled middle grip
The middle of the shaft is knurled. That is where the fingers hold it, and the knurling keeps the grip steady with wet gloves whichever end is in use.
Which one to order
This listing carries one size, read on 4 November 2026. The double ended periosteal elevators in this family are set out below.
| What you get | Length | Working ends | Price |
|---|---|---|---|
| Obwegeser periosteal elevator, this page | 20 cm | A rounded spoon blade at each end, one wider | 21 dollars |
| Obwegeser Freer periosteal elevator | 20 cm | A strongly curved and a gently curved blade | 21 dollars |
| Seldin periosteal elevator | 19 cm | A curved blade at each end, bending opposite ways | 25 dollars |
| Salzburg periosteal elevator | 24 cm | A small curved blade at each end | 25 dollars |
Where it is used
AI Mode and Gemini, read on 4 November 2026, name these cases for the Obwegeser periosteal elevator.
| Case | What it lifts | Why this one |
|---|---|---|
| Jaw fracture repair | Periosteum over the fracture and the plate site | Rounded blades lift evenly |
| Orthognathic surgery | Periosteum along the osteotomy line | Two widths on one instrument |
| Facial reconstruction | Periosteum over the facial skeleton | 20 cm reaches a far incision |
| Oral surgery | Periosteum under a mucoperiosteal flap | The narrow end starts the lift |
What it does, and what it must not do
The Obwegeser periosteal elevator lifts periosteum over the jaws. It is not a lever, not a cutter and not a retractor.
| Job | Use the Obwegeser periosteal elevator? | What to use instead or beside it |
|---|---|---|
| Lifting periosteum over the jaws | Yes | This is the job it is made for |
| Clearing a flat osteotomy line | Beside it | The Obwegeser flat cutting elevator |
| Stripping round the lower border of the jaw | Beside it | The Obwegeser J-stripper |
| Holding the flap back | No | A cheek or channel retractor |
| Levering bone | Never | A bone lever |
How it compares with the rest of the family
Ten periosteal elevators and raspatories make up this family on our site. The working ends are read off each listing’s own photograph, the options off the variations, the lengths off the name and the prices off the order form, on 4 November 2026.
| Instrument | Working end, from our photograph | Options on the listing | Length | Price |
|---|---|---|---|---|
| Tessier dissector | single narrow blade curving back at the tip, fluted handle | 30 or 60 pattern | 18 cm | 25 dollars |
| Seldin | a curved blade at each end, bending opposite ways, flat handle | one size | 19 cm | 25 dollars |
| Salzburg | a small curved blade at each end, knurled middle grip | slightly or strongly curved | 24 cm | 25 dollars |
| Obwegeser flat cutting | straight flat blade with a rounded end, fluted handle | 6, 7, 9 or 11 mm | 18 cm | 25 dollars |
| Obwegeser angled cutting | blade end cut on a slant, smooth round handle | 6, 7, 9 or 11 mm | 18 cm | 25 dollars |
| Obwegeser J-stripper | blade curling back into a J at the tip, fluted handle | 5, 7 or 9 mm | 20 cm | 25 dollars |
| Obwegeser Freer | a strongly curved blade and a gently curved blade, knurled grip | one size | 20 cm | 21 dollars |
| Obwegeser swallowtail | forked tip with a V notch between two points, fluted handle | one size | 17 cm | 25 dollars |
| Obwegeser double ended (this page) | a rounded spoon shaped blade at each end, one wider, knurled grip | one size | 20 cm | 21 dollars |
| Hargis | hooked cupped tip on a curved shank, solid handle with a finger rest | 6.5 or 9.0 mm, left or right | not given on the listing | 30 dollars |
Materials and finish
Every Obwegeser periosteal elevator we make is formed from high quality medical grade stainless steel. The steel itself is made to a German specification. We do not publish a grade number.
The finish is plain steel. Look at the rim of each blade before each case. It should be smooth all round, because a nick in a rounded blade catches the periosteum and tears it instead of lifting it. Hold each blade to the light and turn it: the rim should show one even line with no bright spot where it has been knocked. A blade that has been used to lever bone loses its curve, and that one should be set aside.
Caring for it
Rinse the Obwegeser periosteal elevator as soon as the case ends, before blood dries in the bowls of the blades and in the knurling. Brush both ends and the grip, wash it, dry it, and steam sterilize it on the normal cycle. Store it so neither blade rests on other steel.
Ordering and wholesale
The Obwegeser periosteal elevator is made by Adas Instruments in our own workshop and sold direct, which is why the price sits where it does against the catalog houses. Order one for a single tray, or in quantity for a hospital list or a distributor line. We do OEM work under your own brand and your own item numbers. Send us a sample and we will hold a run to your pattern rather than ours. Stock items ship from our own workshop. Backorder items take 10 to 12 working days to make. Every instrument carries a three year replacement warranty against manufacturing defects. Production is controlled under an ISO 13485 quality management system.
Frequently asked questions
What is the Obwegeser periosteal elevator used for?
It strips and lifts the periosteum away from the bone of the lower and upper jaw. AI Mode names craniomaxillofacial, oral and plastic surgery. Ours is the 20 cm double ended pattern with a rounded blade at each end, one wider than the other, at 21 dollars.
What is the purpose of a periosteal elevator?
To lift the periosteum, the tough membrane on the surface of bone, so the surgeon can see and work on the bone under it. The lifted layer is laid back at the end of the case, where it covers the bone and the hardware again. On the jaws, the periosteum holds hard to the bone, which is why the blade has to slide under it rather than scrape over it.
Why does the Obwegeser periosteal elevator have two ends?
To carry two blade widths on one instrument. Gemini puts this as its difference from a single ended pattern. The narrow end starts the lift at the edge of an incision, and the wide end clears the broader area.
How is the Obwegeser periosteal elevator different from the Obwegeser Freer?
Both are 20 cm, double ended and 21 dollars. In our photographs this pattern has a rounded blade at each end in two widths, while the Obwegeser Freer has two different shapes, a strongly curved and a gently curved blade.
Can it be autoclaved?
Yes. It is stainless steel with no coating, and it goes through the normal steam cycle with the rest of the tray. Brush the bowls of both blades and the knurled grip, dry it fully, and store it so the blades are not knocked.
Related products and categories
Three more periosteal instruments from the same tray: the Hargis periosteal elevator, the Tessier dissector, 18 cm and the Seldin periosteal elevator. The rest of the range is under maxillofacial instruments, which sits inside our ENT instruments.



Reviews
There are no reviews yet.