What the Tessier graft calva osteotome is
The Tessier graft calva osteotome takes bone from the skull to rebuild the face. The skull is made of two layers of hard bone with softer bone between them. The outer layer can be shaved off in thin sheets and moved to the orbit, the nose or the cheek as a graft, while the inner layer still covers the brain. A broad blade that follows the curve of the head is what takes those sheets off.
Google AI Mode, read on 4 November 2026, gives the Tessier calvarial graft osteotome, the Tessier calvarial splitter and the cranial shaver as names for it. It describes a cranio-maxillofacial instrument for harvesting split thickness bone grafts from the outer table of the calvarium. It describes thin layers of the outer bone being shaved off, with straight and curved forms to follow the skull.
Gemini, read the same day, places it in craniofacial, plastic and reconstructive and orthopedic surgery, on the calvarial bone, grafts from the parietal bone and split thickness grafts of the skull. It lists the calvarial graft osteotome and the cranial bone harvesting osteotome as catalog names. Buyers type the short tessier osteotome, or the calvarial bone graft itself.
Key design features
A broad flat blade
Our photograph shows a broad flat blade, and the drawing beside it shows the blade with square shoulders at its base. A broad blade lifts a wide sheet of the outer table at each pass. That gives the surgeon a graft large enough to rebuild the floor of the orbit or the bridge of the nose.
Straight or curved
The listing sells a straight and a curved tip in each width. The curved tip follows the dome of the skull, so the blade stays in the outer layer as it travels. The straight tip works on the flatter part of the head, toward the temple.
A faceted shaft and a striking plate
The shaft in our photograph is faceted along its length and ends in a round flared striking plate. The flats give the fingers a grip that will not turn in the hand, so the blade stays at its angle. The plate takes the mallet.
Two widths
The listing sells 10 and 15 mm, both at 33 dollars, each straight or curved. The 10 mm takes a narrow strip, for a graft to the nose. The 15 mm takes a wider sheet, for the orbit or the cheek.
Which width and tip to order
Four options at one price, read off the variations on 4 November 2026. The guide below is ours. The listing gives no length.
| Width | Straight tip suits | Curved tip suits | Price |
|---|---|---|---|
| 10 mm | A narrow strip from the flatter skull | A narrow strip from the dome | 33 dollars |
| 15 mm | A wide sheet from the flatter skull | A wide sheet from the dome | 33 dollars |
Where it is used
AI Mode and Gemini, read on 4 November 2026, name these cases for the Tessier graft calva osteotome.
| Case | What it harvests | Why this one |
|---|---|---|
| Calvarial bone graft | A sheet of the outer table | The broad blade lifts a wide sheet |
| Rebuilding the orbit | A graft for the orbital floor | The 15 mm takes a wide sheet |
| Rebuilding the nose | A narrow strip of outer bone | The 10 mm takes a strip |
| Parietal grafts | Bone from the parietal skull | Gemini names the parietal bone |
What it does, and what it must not do
The Tessier graft calva osteotome shaves grafts from the outer layer of the skull. It must stay in that layer, and it is not a lever.
| Job | Use the Tessier calva? | What to use instead or beside it |
|---|---|---|
| Shaving a graft from the outer table | Yes | This is the job it is made for |
| Fine cuts in thin facial bone | Beside it | The Marchac osteotome |
| Cutting through both layers of the skull | No | A craniotome or saw |
| Shaping the graft once it is off | Beside it | A bur or a rongeur |
| Levering the graft up | Never | Nothing; the blade is not a lever |
How it compares with the rest of the osteotomes
Eleven maxillofacial osteotomes make up this family on our site. The working ends and handles are read off each listing’s own photograph, the options off the variations and the prices off the order form, on 4 November 2026. No listing gives a length, so none is printed.
| Osteotome | Working end, from our photograph | Handle, from our photograph | Options on the listing | Price |
|---|---|---|---|---|
| Dautrey-Munro | broad flat blade running the full length of a one piece bar | the bar itself, to a small flared striking end | 4, 6, 8, 10, 12, 14 or 16 mm | 22 dollars |
| Epker | long slim blade; drawings of straight, slightly and strongly curved tips | knurled lower grip, round flared striking end | 4, 6 or 8 mm by 1.2 mm, three curves | 20 dollars |
| Hargis | short, broad flat blade on a narrow neck | dark textured handle | 10 or 20 mm | 36 dollars |
| Obwegeser blade | flat blade on a narrow neck; drawings of four widths | brown handle with a metal end cap | 8, 12, 16 or 20 mm | 36 dollars |
| Obwegeser wedge | narrow flat blade on a neck; a thin tapered wedge in the drawing | brown handle with a metal end cap | 7 or 10 mm | 37 dollars |
| Obwegeser maxillary | one piece flat bar curving toward its tip | the bar itself, to a flared striking end | 8 or 11 mm | 28 dollars |
| Obwegeser nasal septum | forked tip, two prongs ending in small round knobs | long slim shaft to a square striking block | 4 or 6 mm | 33 dollars |
| Obwegeser alveolar process | narrow blade at the tip of a slim shaft | ridged handle | 3, 4 or 6.5 mm | 20 dollars |
| Obwegeser alveolar, one piece | very narrow blade on a slim one piece shaft | the shaft, ridged along its length | 2, 4 or 6.5 mm | 19 dollars |
| Marchac | slim straight blade; drawings of three widths | ridged handle with a round striking cap | 4, 6 or 8 mm, straight or curved | 23 dollars |
| Tessier graft calva (this page) | broad flat blade; square shoulders in the drawing | faceted shaft to a round flared striking plate | 10 or 15 mm, straight or curved | 33 dollars |
Materials and finish
Every Tessier graft calva osteotome we make is formed from high quality medical grade stainless steel. The steel itself is made to a German specification. We do not publish a grade number.
The Tessier graft calva osteotome has a plain steel finish. Look along the broad edge before each case. A nick in it tears the sheet of bone it is lifting, and that osteotome should be set aside.
Caring for it
Rinse the Tessier graft calva osteotome as soon as the case ends, before blood and bone dust dry on the blade and the flats of the shaft. Brush both, wash it, dry it, and steam sterilize it on the normal cycle. Keep the straight and the curved tips apart on the tray.
Ordering and wholesale
The Tessier graft calva osteotome is made by Adas Instruments in our own workshop and sold direct, which is why the price sits where it does against the catalog houses. Order one for a single tray, or in quantity for a hospital list or a distributor line. We do OEM work under your own brand and your own item numbers. Send us a sample and we will hold a run to your pattern rather than ours. Stock items ship from our own workshop. Backorder items take 10 to 12 working days to make. Every instrument carries a three year replacement warranty against manufacturing defects. Production is controlled under an ISO 13485 quality management system.
Frequently asked questions
What is the Tessier graft calva osteotome used for?
It harvests split thickness bone grafts from the outer table of the skull, in craniofacial, plastic and reconstructive surgery. AI Mode and Gemini both name it for this. Ours is 10 or 15 mm, straight or curved, at 33 dollars.
Is a Tessier calvarial graft osteotome the same instrument?
Yes. Calva and calvarial both name the vault of the skull, so the Tessier graft calva osteotome and the Tessier calvarial graft osteotome are one instrument. AI Mode also gives the calvarial splitter and the cranial shaver.
Which Tessier width and tip should I order?
The 10 mm takes a narrow strip, for a graft to the nose, and the 15 mm a wider sheet for the orbit or the cheek. Take the curved tip for the dome of the skull and the straight one toward the temple. All four are 33 dollars.
What is a calvarial bone graft?
It is bone taken from the skull to rebuild another part of the head or face. The outer layer of the skull is shaved off in a thin sheet, and the sheet is fixed where bone is missing, such as the floor of the orbit or the bridge of the nose.
Can it be autoclaved?
Yes. It is stainless steel with no coating, and it goes through the normal steam cycle with the rest of the tray. Brush the flats of the shaft clean, dry it fully, and store it so the broad edge is protected.
Related products and categories
Three more osteotomes from the same maxillofacial tray: the Dautrey-Munro osteotome, the Epker osteotome and the Hargis osteotome. The rest of the range is under maxillofacial instruments, which sits inside our ENT instruments.



Reviews
There are no reviews yet.