What the Barmesh wire bending pliers are
The Barmesh wire bending pliers shape metal to teeth. When a broken jaw is held by an arch bar, a strip of stainless steel is wired along the outside of the teeth in each jaw, and the bar has to be bent to follow the curve of the dental arch before it goes on. The same is true of fixation wire looped round a tooth. Long, narrow beaks reach into the bends and hold the metal while it is turned.
Google AI Mode, read on 5 November 2026, describes Barmesh wire bending pliers as tools used in surgery to manipulate, contour and bend surgical mesh or wire frameworks. It names orthopedic cerclage wire and maxillofacial and reconstructive work. A search on the short name alone returns building trade pliers for tying rebar, which is a different tool altogether.
Gemini, read the same day, places them in oral and maxillofacial surgery, orthodontics and facial trauma, on stainless steel arch bars, intermaxillary fixation wires and ligatures. It lists the Barmesh arch bar bending pliers and the barmesh wire bending pliers 13cm as catalog names. Buyers type the plain wire bending pliers, or arch bar bending pliers.
In use, the bar or wire is held in the beaks close to the point of the bend and the pliers are turned in the hand, a little at a time, with the bar tried against the teeth between bends. The fixation lugs on an arch bar have to stay pointing the right way, so the bends are made between them, not through them. The finished bar should lie against every tooth it passes, with no gap for food or for the wire to slip into.
Key design features
Long, narrow tapering beaks
Our photograph shows long beaks that taper to narrow tips. Narrow tips fit between the lugs of an arch bar and into the tight curve round the last molar. The length of the beaks lets a bend be made at a point the hand could not reach with a short pliers.
Thirteen centimeters
At 13 cm the pliers are short enough to work in the mouth or at the side table where the bar is shaped, and long enough to give the hand a firm grip. A short pliers keeps each bend small and under control. Longer pliers give more leverage than a soft arch bar needs, and more leverage makes it easier to kink the bar by accident.
Curved handles with gold colored tips
The handles in our photograph curve outward and end in gold colored tips. The curve fits the palm when the beaks are squeezed on the bar. The gold tips tell these pliers apart from the cutters and twisters on the same tray. On a wiring tray with six pliers and cutters side by side, that one look saves a wrong pick in the middle of a case.
Made for bending, not cutting
The beaks hold and turn metal; they do not cut it. Once the bar is shaped and wired in place, the wire ends are cut with a wire cutter such as the Obwegeser wire cutting pliers. Keeping the bending pliers for bending saves the beaks from the nicks a cut would leave. A nicked beak marks the bar, and a marked bar is weaker at the mark.
What the listing gives you
One pattern at one price, read off the listing on 5 November 2026. What it tells you is set out below, and where each detail was read from.
| What you get | Detail | Read from |
|---|---|---|
| Beaks | Long, narrow and tapering | Our photograph |
| Handles | Curved, with gold colored tips | Our photograph |
| Length | 13 cm | The frozen slug |
| Options | One size | The listing |
| Price | 22 dollars | The order form |
Where it is used
AI Mode and Gemini, read on 5 November 2026, name these cases for the Barmesh wire bending pliers. The reasons in the last column are ours, read off the beaks and the length.
| Case | What it shapes | Why this one |
|---|---|---|
| Arch bar fixation of a jaw fracture | The arch bar to the curve of the teeth | Narrow tips fit between the lugs |
| Intermaxillary fixation | Fixation wire round the teeth | Long beaks reach the back teeth |
| Orthodontics | Wire to the dental arch | Named by Gemini |
| Reconstructive surgery | Wire frameworks | Named by AI Mode |
What it does, and what it must not do
The Barmesh wire bending pliers bend and shape wire and arch bars. They are not a cutter and not a wire twister.
| Job | Use the Barmesh pliers? | What to use instead or beside it |
|---|---|---|
| Bending an arch bar to the teeth | Yes | This is the job they are made for |
| Twisting a fixation wire tight | No | The Berry wire twisting pliers or the wire twister pliers |
| Cutting the wire ends | No | The Obwegeser wire cutting pliers |
| Tucking the cut ends against the teeth | Beside it | The Mershon wire pusher |
| Cutting heavy wire | Never | The compound action wire cutting pliers |
How they compare with the rest of the wiring tray
Eight wiring instruments make up this family on our site. The working ends and handles are read off each listing’s own photograph, the options off the variations and the prices off the order form, on 5 November 2026.
| Instrument | Working end, from our photograph | Handle, from our photograph | Size or options | Price |
|---|---|---|---|---|
| Barmesh pliers (this page) | long, narrow tapering beaks | curved handles with gold colored tips | 13 cm | 22 dollars |
| Berry pliers | long narrow jaws, a cross hatched face in the drawing | gold colored ring handles with a ratchet | 19 cm | 28 dollars |
| Wire twister pliers | cross hatched jaws, Fig 1 narrow to Fig 3 broad | gold colored handles on a compound action joint | 18 cm, Fig 1, Fig 2 or Fig 3 | 45 dollars |
| Harvey scissors | short, stout blades with blunt rounded tips | ring handles | 12 cm | 20 dollars |
| Obwegeser cutter | short angled side cutting jaws | plain curved handles | 12 cm | 22 dollars |
| Compound action cutter | short angled cutting jaws on a compound action joint | gold colored handle ends | 17 cm, 22.5 cm or a set of both | 45, 55 or 95 dollars |
| Ligature wire | soft wire on a 10 m coil | none, the wire comes on a spool | 11 diameters from 0.2 to 1.5 mm | 18 dollars |
| Mershon wire pusher | bent tip ending in a notch | round handle | 15 cm | 20 dollars |
Materials and finish
Every Barmesh wire bending pliers we make is formed from high quality medical grade stainless steel. The steel itself is made to a German specification. We do not publish a grade number.
The Barmesh wire bending pliers have a plain steel finish. Look at the tips of the beaks before each case. Tips that no longer meet, or that carry a nick from cutting, mark the bar as they grip it, and those pliers should be set aside.
Caring for it
Rinse the Barmesh wire bending pliers as soon as the case ends, before blood dries in the joint and between the beaks. Brush the joint open and closed, wash them, dry them, and steam sterilize them on the normal cycle. A drop of instrument lubricant in the joint keeps the action smooth.
Ordering and wholesale
The Barmesh wire bending pliers is made by Adas Instruments in our own workshop and sold direct, which is why the price sits where it does against the catalog houses. Order one for a single tray, or in quantity for a hospital list or a distributor line. We do OEM work under your own brand and your own item numbers. Send us a sample and we will hold a run to your pattern rather than ours. Stock items ship from our own workshop. Backorder items take 10 to 12 working days to make. Every instrument carries a three year replacement warranty against manufacturing defects. Production is controlled under an ISO 13485 quality management system.
Frequently asked questions
What are the Barmesh wire bending pliers used for?
They bend and contour surgical wire and arch bars, so the bar follows the curve of the teeth before it is wired on. Gemini names oral and maxillofacial surgery, orthodontics and facial trauma. Ours are 13 cm, at 22 dollars.
Are Barmesh pliers the same as rebar pliers?
No. A search on Barmesh pliers alone returns building trade pliers for tying and cutting the steel mesh in concrete. Ours are surgical wire bending pliers, made to shape arch bars and fixation wire in jaw fracture work.
Can the Barmesh pliers cut wire?
No. The beaks are made to hold and bend metal. Wire ends are cut with a wire cutter, such as the Obwegeser wire cutting pliers, and keeping the bending pliers for bending keeps their tips from being nicked.
What are arch bar bending pliers?
Arch bar bending pliers shape the metal arch bar that is wired along the outside of the teeth to hold a broken jaw. Gemini lists the Barmesh arch bar bending pliers as a catalog name for this pattern.
Can they be autoclaved?
Yes. They are stainless steel with no coating, and they go through the normal steam cycle with the rest of the tray. Open the joint for cleaning, dry them fully, and lubricate the joint now and then.
Related products and categories
Three more wiring instruments from the same maxillofacial tray: the Berry wire twisting pliers, 19 cm, the wire twister pliers, 18 cm and the Harvey wire cutting scissors, 12 cm. The rest of the range is under maxillofacial instruments, which sits inside our ENT instruments.



Reviews
There are no reviews yet.