What the Berry wire twisting pliers are
The Berry wire twisting pliers hold the wire so the hand does not have to. When a loop of steel wire is passed round bone and its two ends are brought together, the ends have to be gripped hard and turned until the loop is tight, without the jaws slipping or the wire spinning in them. A ratchet that locks the jaws shut lets the surgeon turn the pliers with a relaxed hand.
Google AI Mode, read on 5 November 2026, gives the Berry wire twisters and the Berry wire twisting forceps as other names, and describes a heavy orthopedic and cardiothoracic instrument. In its words, it is made to grasp, loop, handle and twist heavy stainless steel cerclage wire when bone is fixed, naming fracture fixation and the closure of the breastbone after a median sternotomy.
Gemini, read the same day, places it in oral and maxillofacial, orthopedic and cardiothoracic surgery, on heavy intermaxillary fixation wire, cerclage wire and ligatures. It lists the ratcheted Berry wire twister and the berry wire twisting pliers 19cm as catalog names, and sets it apart from non locking twisting pliers by the ratchet that holds the wire under tension. Buyers type the plain wire twisting pliers, or cerclage wire twister.
In use, the two ends of the wire are laid together in the jaws, the ratchet is closed, and the pliers are turned while drawing back gently, so the wire twists down onto the bone in an even spiral. When the twist is tight, the ratchet is released and the ends are cut and tucked.
Key design features
A ratchet
Our photograph shows a ratchet between the ring handles. Once the jaws are closed on the wire, the ratchet holds them there, so the fingers in the rings only have to turn the pliers, not squeeze them as well. Gemini names the ratchet as the difference from twisting pliers that do not lock.
Long narrow jaws with a cross hatched face
The jaws are long and narrow, and the drawing beside them shows a cross hatched face. The cross hatching grips smooth steel wire on two directions at once, so the wire cannot slide out along the jaw or turn inside it as the twist is made. A wire that turns in the jaws untwists itself as fast as the pliers twist it, and the loop never tightens.
Gold colored ring handles
The ring handles in our photograph are gold colored. Ring handles let the pliers be turned round and round from the fingers. The gold color tells them apart at a glance from needle holders of the same shape on a mixed tray. A needle holder used on wire is spoiled for needles, and wire pliers used on a needle mark it, so keeping the two apart matters.
Nineteen centimeters
At 19 cm the pliers reach a wire round the breastbone or a long bone with the hand clear of the wound. The length also gives the turning hand room to make full turns without knocking the edges of the incision. In the mouth the same length reaches the back teeth with the rings outside the lips.
What the listing gives you
One pattern at one price, read off the listing on 5 November 2026. What it tells you is set out below, and where each detail was read from.
| What you get | Detail | Read from |
|---|---|---|
| Jaws | Long and narrow, cross hatched face | Our photograph and its drawing |
| Handles | Gold colored rings with a ratchet | Our photograph |
| Length | 19 cm | The product name |
| Options | One size | The listing |
| Price | 28 dollars | The order form |
Where it is used
AI Mode and Gemini, read on 5 November 2026, name these cases for the Berry wire twisting pliers. The reasons in the last column are ours, read off the jaws, the ratchet and the length.
| Case | What it twists | Why this one |
|---|---|---|
| Fracture fixation | Cerclage wire round bone | The ratchet holds the wire while it turns |
| Sternal closure | Wire round the breastbone | 19 cm reaches with the hand clear |
| Jaw surgery | Intermaxillary fixation wire | Named by Gemini |
| Ligature wiring | Ligatures round teeth or bone | Cross hatched jaws stop the wire spinning |
What it does, and what it must not do
The Berry wire twisting pliers grip and twist wire tight. They are not a cutter, and they are not a needle holder.
| Job | Use the Berry pliers? | What to use instead or beside it |
|---|---|---|
| Twisting a cerclage or fixation wire tight | Yes | This is the job they are made for |
| A compound action grip on heavy wire | Beside it | The wire twister pliers |
| Bending an arch bar | No | The Barmesh wire bending pliers |
| Cutting the twisted ends | No | The Obwegeser wire cutting pliers |
| Holding a suture needle | Never | A needle holder |
How they compare with the rest of the wiring tray
Eight wiring instruments make up this family on our site. The working ends and handles are read off each listing’s own photograph, the options off the variations and the prices off the order form, on 5 November 2026.
| Instrument | Working end, from our photograph | Handle, from our photograph | Size or options | Price |
|---|---|---|---|---|
| Barmesh pliers | long, narrow tapering beaks | curved handles with gold colored tips | 13 cm | 22 dollars |
| Berry pliers (this page) | long narrow jaws, a cross hatched face in the drawing | gold colored ring handles with a ratchet | 19 cm | 28 dollars |
| Wire twister pliers | cross hatched jaws, Fig 1 narrow to Fig 3 broad | gold colored handles on a compound action joint | 18 cm, Fig 1, Fig 2 or Fig 3 | 45 dollars |
| Harvey scissors | short, stout blades with blunt rounded tips | ring handles | 12 cm | 20 dollars |
| Obwegeser cutter | short angled side cutting jaws | plain curved handles | 12 cm | 22 dollars |
| Compound action cutter | short angled cutting jaws on a compound action joint | gold colored handle ends | 17 cm, 22.5 cm or a set of both | 45, 55 or 95 dollars |
| Ligature wire | soft wire on a 10 m coil | none, the wire comes on a spool | 11 diameters from 0.2 to 1.5 mm | 18 dollars |
| Mershon wire pusher | bent tip ending in a notch | round handle | 15 cm | 20 dollars |
Materials and finish
Every Berry wire twisting pliers we make is formed from high quality medical grade stainless steel. The steel itself is made to a German specification. We do not publish a grade number.
The Berry wire twisting pliers have a plain steel finish on the jaws. Look at the cross hatching before each case. Hatching worn smooth lets the wire spin, and a ratchet that no longer holds should be set aside.
Caring for it
Rinse the Berry wire twisting pliers as soon as the case ends, before blood dries in the cross hatching and the ratchet. Brush both with the jaws open, wash them, dry them, and steam sterilize them open on the ratchet. A drop of instrument lubricant keeps the joint smooth.
Ordering and wholesale
The Berry wire twisting pliers is made by Adas Instruments in our own workshop and sold direct, which is why the price sits where it does against the catalog houses. Order one for a single tray, or in quantity for a hospital list or a distributor line. We do OEM work under your own brand and your own item numbers. Send us a sample and we will hold a run to your pattern rather than ours. Stock items ship from our own workshop. Backorder items take 10 to 12 working days to make. Every instrument carries a three year replacement warranty against manufacturing defects. Production is controlled under an ISO 13485 quality management system.
Frequently asked questions
What are the Berry wire twisting pliers used for?
They grasp, loop and twist stainless steel wire when bone is held together, in fracture fixation and the closure of the breastbone, in AI Mode’s words. Gemini adds intermaxillary fixation wire. Ours are 19 cm with a ratchet, at 28 dollars.
Why do the Berry pliers have a ratchet?
So the jaws stay shut on the wire while the pliers are turned. The fingers only have to turn, not squeeze, and the wire does not slip as the twist tightens. Gemini names the ratchet as the difference from pliers that do not lock, and the ratchet is released with a small squeeze when the twist is done.
Are Berry wire twisting forceps the same instrument?
Yes. AI Mode gives Berry wire twisting pliers, Berry wire twisters and Berry wire twisting forceps as names for one instrument: long jaws on ring handles, made to grip and twist wire tight, with a ratchet to hold the grip.
Do the Berry pliers have hard metal jaw inserts?
AI Mode describes versions with inserts of a harder metal in the jaws. Our listing name does not say so, and we do not claim it. The cross hatched steel jaws in our drawing are what we sell. Ask us for a close photograph of the jaws before you order if your tray needs them.
Can they be autoclaved?
Yes. They are stainless steel, and they go through the normal steam cycle with the rest of the tray. Sterilize them with the ratchet open, dry them fully, and lubricate the joint now and then.
Related products and categories
Three more wiring instruments from the same maxillofacial tray: the wire twister pliers, 18 cm, the Harvey wire cutting scissors, 12 cm and the Obwegeser wire cutting pliers, 12 cm. The rest of the range is under maxillofacial instruments, which sits inside our ENT instruments.



Reviews
There are no reviews yet.