What the Harvey wire cutting scissors are
The Harvey wire cutting scissors are the light cutter of the wiring tray. Soft ligature wire and fine fixation wire do not need the heavy jaws of a cutting pliers; they need a short, strong scissor that cuts close and does not catch the gum. Short, stout blades take the wire near the pivot, where the cut is strongest, and blunt tips keep the points away from soft tissue.
Google AI Mode, read on 5 November 2026, describes Harvey wire cutting scissors as surgical instruments made for cutting and trimming orthodontic, dental and orthopedic wire. It describes straight blades with blunt tips, set up to cut wire without the points puncturing the tissue round it.
Gemini, read the same day, places them in oral and maxillofacial, plastic and reconstructive and hand surgery, on soft ligature wire, fine osteosynthesis wire and the ties of an arch bar. It lists the Harvey wire cutter and the harvey wire cutting scissors 12cm as catalog names. Buyers type the plain wire cutting scissors, or surgical wire cutting scissors.
In use, the wire is taken deep in the blades near the pivot and cut close to the twist or the knot, so a short stump is left to be tucked against the teeth. Tissue scissors used on wire lose their edge at once, which is why wire is cut with a scissor made for it. A wiring tray keeps the Harvey beside the twisters, so each ligature is twisted and cut without a change of instrument tray.
Key design features
Short, stout blades
Our photograph shows short, stout blades. A short blade puts the wire close to the pivot, where a scissor cuts hardest, so soft wire parts cleanly in one closing of the hand. The stout blade does not spring apart on the wire as a fine tissue scissor would. Taken near the tips instead, the same wire would bend the blades apart and leave a frayed end.
Blunt rounded tips
The tips are blunt and rounded. Cutting ligature wire in the mouth means working close to the gum and the lip, and a blunt tip there will not prick the soft tissue if the hand slips. AI Mode names the blunt tips for the same reason. A pointed scissor near the gum, in a mouth full of wire, is a cut waiting to happen.
Twelve centimeters
At 12 cm the Harvey is the length of a small hand scissor. It reaches the back teeth and the side of an arch bar while the hand stays at the lips, and it is light enough to use for a long run of small cuts. A wired jaw can carry a dozen or more ligatures, and each one is cut short before the next is placed.
Ring handles
The ring handles let the thumb and finger open and close the blades with a light, quick action. For soft wire that is all the force needed. Heavier wire goes to a cutting pliers with a stronger grip. Keeping the scissors to soft wire is what keeps their edges sharp for the next case.
What the listing gives you
One pattern at one price, read off the listing on 5 November 2026. What it tells you is set out below, and where each detail was read from.
| What you get | Detail | Read from |
|---|---|---|
| Blades | Short and stout | Our photograph |
| Tips | Blunt and rounded | Our photograph |
| Length | 12 cm | The product name |
| Options | One size | The listing |
| Price | 20 dollars | The order form |
Where it is used
AI Mode and Gemini, read on 5 November 2026, name these cases for the Harvey wire cutting scissors. The reasons in the last column are ours, read off the blades and the tips.
| Case | What it cuts | Why this one |
|---|---|---|
| Arch bar wiring | The ties of the arch bar | Short blades cut close |
| Ligature wiring | Soft ligature wire | Blunt tips spare the gum |
| Orthodontic and dental work | Orthodontic wire | Named by AI Mode |
| Hand and plastic surgery | Fine fixation wire | Named by Gemini |
What it does, and what it must not do
The Harvey wire cutting scissors cut soft and fine wire. They are not for heavy wire and not for tissue. Keep them for wire alone, and on the tray beside the twisters, so the right scissors are picked up for each ligature without a search.
| Job | Use the Harvey scissors? | What to use instead or beside it |
|---|---|---|
| Cutting soft ligature wire close to the teeth | Yes | This is the job they are made for |
| Cutting heavier fixation wire | No | The Obwegeser wire cutting pliers |
| Cutting heavy cerclage wire | No | The compound action wire cutting pliers |
| Tucking the cut end | Beside it | The Mershon wire pusher |
| Cutting tissue or suture | Never | Tissue or suture scissors |
How they compare with the rest of the wiring tray
Eight wiring instruments make up this family on our site. The working ends and handles are read off each listing’s own photograph, the options off the variations and the prices off the order form, on 5 November 2026.
| Instrument | Working end, from our photograph | Handle, from our photograph | Size or options | Price |
|---|---|---|---|---|
| Barmesh pliers | long, narrow tapering beaks | curved handles with gold colored tips | 13 cm | 22 dollars |
| Berry pliers | long narrow jaws, a cross hatched face in the drawing | gold colored ring handles with a ratchet | 19 cm | 28 dollars |
| Wire twister pliers | cross hatched jaws, Fig 1 narrow to Fig 3 broad | gold colored handles on a compound action joint | 18 cm, Fig 1, Fig 2 or Fig 3 | 45 dollars |
| Harvey scissors (this page) | short, stout blades with blunt rounded tips | ring handles | 12 cm | 20 dollars |
| Obwegeser cutter | short angled side cutting jaws | plain curved handles | 12 cm | 22 dollars |
| Compound action cutter | short angled cutting jaws on a compound action joint | gold colored handle ends | 17 cm, 22.5 cm or a set of both | 45, 55 or 95 dollars |
| Ligature wire | soft wire on a 10 m coil | none, the wire comes on a spool | 11 diameters from 0.2 to 1.5 mm | 18 dollars |
| Mershon wire pusher | bent tip ending in a notch | round handle | 15 cm | 20 dollars |
Materials and finish
Every Harvey wire cutting scissors we make is formed from high quality medical grade stainless steel. The steel itself is made to a German specification. We do not publish a grade number.
The Harvey wire cutting scissors have a plain steel finish. Look along the blades before each case. A blade with a notch in it from heavy wire chews the next wire instead of cutting it, and those scissors should be set aside. Keep them for soft and fine wire, and the edges stay sharp for a long working life.
Caring for it
Rinse the Harvey wire cutting scissors as soon as the case ends, before blood dries in the joint. Brush the blades open and closed, wash them, dry them, and steam sterilize them on the normal cycle with the rest of the tray. A drop of instrument lubricant in the joint keeps the action light.
Ordering and wholesale
The Harvey wire cutting scissors is made by Adas Instruments in our own workshop and sold direct, which is why the price sits where it does against the catalog houses. Order one for a single tray, or in quantity for a hospital list or a distributor line. We do OEM work under your own brand and your own item numbers. Send us a sample and we will hold a run to your pattern rather than ours. Stock items ship from our own workshop. Backorder items take 10 to 12 working days to make. Every instrument carries a three year replacement warranty against manufacturing defects. Production is controlled under an ISO 13485 quality management system.
Frequently asked questions
What are the Harvey wire cutting scissors used for?
They cut and trim orthodontic, dental and orthopedic wire, in AI Mode’s words, and Gemini names soft ligature wire and the ties of an arch bar. Ours are 12 cm with short, stout blades and blunt tips, at 20 dollars.
What are wire cutting scissors used for?
They cut soft and fine wire, such as ligature wire round teeth and the ties of an arch bar, close to the twist or the knot. Their short, stout blades take wire without losing the edge a tissue scissor would lose.
Can the Harvey scissors cut heavy wire?
No. Soft and fine wire, yes; the Harvey is a scissor made for it, and ordinary tissue scissors are spoiled by any wire at all. Heavy fixation and cerclage wire need a cutting pliers, such as the compound action pattern on our site.
Do the Harvey scissors have a serrated blade?
AI Mode describes Harvey scissors from other makers with one blade toothed to hold the wire. Our photograph shows short, stout blades, and we do not claim a serrated edge. Ask us for a close photograph of the blades before you order.
Can the Harvey scissors be autoclaved?
Yes. They are stainless steel with no coating, and they go through the normal steam cycle with the rest of the tray. Dry the joint fully, and lubricate it now and then so the blades close lightly.
Related products and categories
Three more wiring instruments from the same maxillofacial tray: the Obwegeser wire cutting pliers, 12 cm, the compound action wire cutting pliers and the soft ligature wire, 10 m. The rest of the range is under maxillofacial instruments, which sits inside our ENT instruments.



Reviews
There are no reviews yet.