What soft ligature wire is
Soft ligature wire is what holds a wired jaw together. When a broken jaw is fixed with arch bars, each bar is tied to the teeth with short lengths of wire, and the upper and lower bars are then wired to each other so the teeth meet in the right bite while the bone heals. The wire has to be soft enough to loop and twist round a tooth by hand, and strong enough to hold for weeks.
Google AI Mode, read on 5 November 2026, describes soft surgical ligature wire as a pliable stainless steel wire used across orthopedics, maxillofacial trauma surgery and orthodontics. In its words, its main purpose is the fixation of bone fragments, holding surgical splints and intermaxillary fixation during the treatment of a fracture, and it adds tension band wiring and arch bars. Its answer names this Adas Instruments listing.
Gemini, read the same day, places it in oral and maxillofacial surgery, orthodontics and dental trauma, on arch bars, teeth, the bone that holds them and intermaxillary fixation. It lists the surgical soft ligature wire and the stainless steel ligature wire as catalog names, and sets it apart from hard, pre cut osteosynthesis wire by the continuous soft coil. Buyers type the plain ligature wire, surgical wire, or ligature wire orthodontics.
In use, a length is cut from the coil, looped round the neck of a tooth and the arch bar, and its two ends are twisted tight with a wire twister. The twisted end is cut short and tucked against the tooth. The diameter is picked for the job: the thinnest for orthodontic ligatures, the middle sizes for arch bar ties, the heaviest for wiring the jaws together.
Key design features
Soft wire
The listing calls this wire soft, and AI Mode describes ligature wire of this kind as pliable. Soft wire loops round the neck of a tooth by hand and twists down without kinking. Hard wire springs back and will not sit snug against the tooth.
Eleven diameters
The listing sells 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, 1.0, 1.2 and 1.5 mm, all at 18 dollars. That covers fine orthodontic ligatures at the low end and heavy wiring at the top, so one tray can carry the sizes a case needs.
A 10 m coil
Our photograph shows the wire on a spool. A 10 m coil is cut to length at the table, so each ligature is the length the tooth or the bar needs, and there is no waste from pre cut lengths that are too long or too short. One coil of each diameter a team uses covers a long run of cases.
Made to be twisted and cut
Ligature wire is twisted tight with wire twisting pliers and cut short with a wire cutter or wire cutting scissors. The rest of this wiring family on our site, from the Berry pliers to the Mershon wire pusher, is made to work with it.
Which diameter to order
Eleven diameters at one price, read off the variations on 5 November 2026. The guide below is ours.
| Diameter | Suits, our guide | Price |
|---|---|---|
| 0.2 to 0.3 mm | Fine orthodontic ligatures | 18 dollars each |
| 0.4 to 0.5 mm | Arch bar ties round single teeth | 18 dollars each |
| 0.6 to 0.7 mm | General ligature wiring | 18 dollars each |
| 0.8 to 1.0 mm | Wiring the jaws together | 18 dollars each |
| 1.2 to 1.5 mm | Heavy wiring and suspension | 18 dollars each |
Where it is used
AI Mode and Gemini, read on 5 November 2026, name these cases for soft ligature wire. The reasons in the last column are ours, read off the softness, the coil and the diameters.
| Case | What it holds | Why this one |
|---|---|---|
| Intermaxillary fixation | The upper and lower jaws together | Heavy diameters hold the bite |
| Arch bar fixation | The arch bar to the teeth | Soft wire loops round each tooth |
| Fixing bone fragments | Fragments of a fracture | Named by AI Mode |
| Orthodontics | Ligatures on the teeth | Fine diameters, 0.2 to 0.3 mm |
What it does, and what it must not do
Soft ligature wire ties and holds. It is not a suture for soft tissue, and it is not a substitute for a plate where a plate is needed. Each length is cut fresh from the coil for the patient in front of you.
| Job | Use the ligature wire? | What to use instead or beside it |
|---|---|---|
| Tying an arch bar to the teeth | Yes | This is the job it is made for |
| Twisting the wire tight | Beside it | The Berry or the wire twister pliers |
| Cutting the twisted end | Beside it | The Harvey scissors or the Obwegeser cutter |
| Tucking the cut end | Beside it | The Mershon wire pusher |
| Closing soft tissue | Never | A suture |
How it compares with the rest of the wiring tray
Eight wiring instruments make up this family on our site. The working ends and handles are read off each listing’s own photograph, the options off the variations and the prices off the order form, on 5 November 2026.
| Instrument | Working end, from our photograph | Handle, from our photograph | Size or options | Price |
|---|---|---|---|---|
| Barmesh pliers | long, narrow tapering beaks | curved handles with gold colored tips | 13 cm | 22 dollars |
| Berry pliers | long narrow jaws, a cross hatched face in the drawing | gold colored ring handles with a ratchet | 19 cm | 28 dollars |
| Wire twister pliers | cross hatched jaws, Fig 1 narrow to Fig 3 broad | gold colored handles on a compound action joint | 18 cm, Fig 1, Fig 2 or Fig 3 | 45 dollars |
| Harvey scissors | short, stout blades with blunt rounded tips | ring handles | 12 cm | 20 dollars |
| Obwegeser cutter | short angled side cutting jaws | plain curved handles | 12 cm | 22 dollars |
| Compound action cutter | short angled cutting jaws on a compound action joint | gold colored handle ends | 17 cm, 22.5 cm or a set of both | 45, 55 or 95 dollars |
| Ligature wire (this page) | soft wire on a 10 m coil | none, the wire comes on a spool | 11 diameters from 0.2 to 1.5 mm | 18 dollars |
| Mershon wire pusher | bent tip ending in a notch | round handle | 15 cm | 20 dollars |
Materials and finish
Every ligature wire we make is drawn from high quality medical grade stainless steel. The steel itself is made to a German specification. We do not publish a grade number.
The ligature wire comes plain, on a spool. Keep the coil in its packet until it is used, and cut from it with clean instruments. A length that has been kinked should be thrown away, not straightened, because a kink is where wire breaks. Keep each diameter in its own labeled packet, so the right size is picked up.
Caring for it
Store the ligature wire coil dry, in its packet, away from other steel that could mark it. Cut lengths are sterilized with the rest of the tray before use, following your own department’s rules for wire, and any length left over from a case is not reused on another patient.
Ordering and wholesale
The ligature wire is made by Adas Instruments in our own workshop and sold direct, which is why the price sits where it does against the catalog houses. Order one for a single tray, or in quantity for a hospital list or a distributor line. We do OEM work under your own brand and your own item numbers. Send us a sample and we will hold a run to your pattern rather than ours. Stock items ship from our own workshop. Backorder items take 10 to 12 working days to make. Every instrument carries a three year replacement warranty against manufacturing defects. Production is controlled under an ISO 13485 quality management system.
Frequently asked questions
What is the ligature wire used for?
It fixes bone fragments, holds arch bars and surgical splints to the teeth and wires the jaws together while a fracture heals, in AI Mode’s words. Gemini adds orthodontics. Ours is soft ligature wire on a 10 m coil in eleven diameters, at 18 dollars.
What is a ligature wire used for?
A ligature wire is a short length of soft wire tied round something to hold it. In the mouth it ties an arch bar or an orthodontic wire to the teeth, and in jaw surgery it holds the upper and lower teeth together in the right bite.
Which ligature wire diameter should I order?
Take 0.2 to 0.3 mm for fine orthodontic ligatures and 0.4 to 0.5 mm for arch bar ties. Take 0.8 to 1.0 mm for wiring the jaws together, and 1.2 to 1.5 mm for the heaviest wiring. Every diameter is 18 dollars.
Why is the ligature wire soft?
So it can be looped round a tooth by hand and twisted down without springing back or kinking. Soft wire sits snug against the tooth and the bar. AI Mode describes ligature wire of this kind as pliable for the same reason.
How long is each coil?
Each coil is 10 m, on a spool, and it is cut to length at the table. That gives each ligature the length the tooth or bar needs, from one coil, in the diameter you order.
Related products and categories
Three more wiring instruments from the same maxillofacial tray: the Mershon wire pusher, 15 cm, the Barmesh wire bending pliers, 13 cm and the Berry wire twisting pliers, 19 cm. The rest of the range is under maxillofacial instruments, which sits inside our ENT instruments.


Reviews
There are no reviews yet.