What the Mershon wire pusher is
The Mershon wire pusher finishes the wiring. Every ligature round a tooth ends in a twisted stump of wire, and a stump left standing cuts the inside of the cheek and the lip for as long as the wire is in. The pusher bends each stump down and tucks it under the arch bar or against the tooth, so the patient’s mouth stays comfortable through the weeks of fixation.
Google AI Mode, read on 5 November 2026, gives the Mershon band pusher as another name and describes a single ended orthodontic hand instrument. In its words, it is used to adapt, contour and fully seat molar bands on the teeth, and also to tuck ligature wire and position arch bars away from the soft tissue of the mouth. It describes a serrated tip that grips the smooth metal of bands and wires.
Gemini, read the same day, places it in oral and maxillofacial surgery, orthodontics and pediatric dental work, on intermaxillary fixation wire, the ends of ligatures and the hooks of an arch bar. It lists the Mershon band pusher and the mershon wire pusher 15cm as catalog names, and sets it apart from a periosteal elevator by the small notched tip made to seat and tuck wire. Buyers type wire pusher, band pusher, or wire pusher ortho.
In use, the notch is set on the twisted stump and the pusher is pressed and rolled so the stump bends down and in, under the bar or into the space between the teeth. On a band, the tip is set on its edge and pressed so the band slides down over the tooth.
Key design features
A notched tip
Our photograph and its drawing show the working end ending in a notch. The notch sits on a wire stump or the edge of a band and holds it as the pusher presses, so the tip does not slide off the smooth metal onto the gum. AI Mode describes a serrated tip for the same grip. A tip that slips under pressure is the one way a pusher can hurt the gum it is meant to protect.
A bent working end
The tip is bent away from the line of the handle. The bend lets the notch meet a wire stump or a band at the back teeth face on, while the handle stays out of the line of sight at the front of the mouth. Upper and lower teeth are both reached by turning the pusher over in the fingers.
Fifteen centimeters
At 15 cm the pusher is held like a pen. It reaches every tooth in the arch, front to back, and gives the fingers fine control over how hard each stump or band is pressed. A longer instrument would leave the hand further from the work, and a pusher is all about small, placed pressure.
A round handle
The handle in our photograph is round and fills the fingers. Pushing a band down over a molar takes firm pressure, and a full handle spreads it so the fingertips do not tire. The handle also rolls, so the notch can be turned to face each stump. Rolled a little as it presses, the notch bends the stump down in the direction it should lie.
What the listing gives you
One pattern at one price, read off the listing on 5 November 2026. What it tells you is set out below, and where each detail was read from.
| What you get | Detail | Read from |
|---|---|---|
| Tip | Bent, ending in a notch | Our photograph and its drawing |
| Handle | Round | Our photograph |
| Length | 15 cm | The product name |
| Options | One size | The listing |
| Price | 20 dollars | The order form |
Where it is used
AI Mode and Gemini, read on 5 November 2026, name these cases for the Mershon wire pusher. The reasons in the last column are ours, read off the tip, the bend and the length.
| Case | What it pushes | Why this one |
|---|---|---|
| Arch bar fixation | Ligature stumps under the bar | The notch holds the stump |
| Intermaxillary fixation | Twisted wire ends | The bent tip reaches the back teeth |
| Orthodontics | Molar bands onto the teeth | Named by AI Mode |
| Pediatric dental work | Wire ends and bands | Named by Gemini |
What it does, and what it must not do
The Mershon wire pusher tucks wire ends and seats bands. It is not a lever, and it is not a periosteal elevator. It is the last instrument used on each ligature, after the twist and the cut, and the one that decides how comfortable the wired mouth will be.
| Job | Use the Mershon pusher? | What to use instead or beside it |
|---|---|---|
| Tucking a ligature stump under the bar | Yes | This is the job it is made for |
| Seating a molar band | Yes | AI Mode names this job too |
| Cutting the stump short first | No | The Harvey scissors or the Obwegeser cutter |
| Twisting the ligature tight | No | The Berry or the wire twister pliers |
| Lifting tissue off bone | Never | A periosteal elevator |
How it compares with the rest of the wiring tray
Eight wiring instruments make up this family on our site. The working ends and handles are read off each listing’s own photograph, the options off the variations and the prices off the order form, on 5 November 2026.
| Instrument | Working end, from our photograph | Handle, from our photograph | Size or options | Price |
|---|---|---|---|---|
| Barmesh pliers | long, narrow tapering beaks | curved handles with gold colored tips | 13 cm | 22 dollars |
| Berry pliers | long narrow jaws, a cross hatched face in the drawing | gold colored ring handles with a ratchet | 19 cm | 28 dollars |
| Wire twister pliers | cross hatched jaws, Fig 1 narrow to Fig 3 broad | gold colored handles on a compound action joint | 18 cm, Fig 1, Fig 2 or Fig 3 | 45 dollars |
| Harvey scissors | short, stout blades with blunt rounded tips | ring handles | 12 cm | 20 dollars |
| Obwegeser cutter | short angled side cutting jaws | plain curved handles | 12 cm | 22 dollars |
| Compound action cutter | short angled cutting jaws on a compound action joint | gold colored handle ends | 17 cm, 22.5 cm or a set of both | 45, 55 or 95 dollars |
| Ligature wire | soft wire on a 10 m coil | none, the wire comes on a spool | 11 diameters from 0.2 to 1.5 mm | 18 dollars |
| Mershon wire pusher (this page) | bent tip ending in a notch | round handle | 15 cm | 20 dollars |
Materials and finish
Every Mershon wire pusher we make is formed from high quality medical grade stainless steel. The steel itself is made to a German specification. We do not publish a grade number.
The Mershon wire pusher has a plain steel finish. Look at the notch before each case. A notch worn smooth lets the tip slide off the wire onto the gum, and that pusher should be set aside.
Caring for it
Rinse the Mershon wire pusher as soon as the case ends, before blood dries in the notch. Brush the tip and the handle, wash it, dry it, and steam sterilize it on the normal cycle with the rest of the tray.
Ordering and wholesale
The Mershon wire pusher is made by Adas Instruments in our own workshop and sold direct, which is why the price sits where it does against the catalog houses. Order one for a single tray, or in quantity for a hospital list or a distributor line. We do OEM work under your own brand and your own item numbers. Send us a sample and we will hold a run to your pattern rather than ours. Stock items ship from our own workshop. Backorder items take 10 to 12 working days to make. Every instrument carries a three year replacement warranty against manufacturing defects. Production is controlled under an ISO 13485 quality management system.
Frequently asked questions
What is the Mershon wire pusher used for?
It seats molar bands on the teeth and tucks ligature wire ends and arch bars away from the soft tissue of the mouth, in AI Mode’s words. Gemini adds intermaxillary fixation. Ours is 15 cm with a notched tip, at 20 dollars.
Is a Mershon band pusher the same instrument?
Yes. AI Mode says the Mershon wire pusher and the Mershon band pusher are names used for one instrument. Wire pusher names the tucking of ligature ends; band pusher names the seating of molar bands.
Why does the Mershon tip have a notch?
The notch sits on a wire stump or the edge of a band and holds it while the pusher presses, so the tip does not slide off the smooth metal onto the gum. AI Mode describes a serrated tip for the same grip.
Why tuck ligature wire ends?
A twisted stump left standing cuts the inside of the cheek and the lip for as long as the wire stays in. Bent down and tucked under the bar or against the tooth, it stays out of the way through the weeks of fixation.
Can it be autoclaved?
Yes. It is stainless steel with no coating, and it goes through the normal steam cycle with the rest of the tray. Brush the notch clean, dry it fully, and store it so the tip is not bent.
Related products and categories
Three more wiring instruments from the same maxillofacial tray: the Barmesh wire bending pliers, 13 cm, the Berry wire twisting pliers, 19 cm and the wire twister pliers, 18 cm. The rest of the range is under maxillofacial instruments, which sits inside our ENT instruments.



Reviews
There are no reviews yet.