What the Obwegeser wire cutting pliers are
The Obwegeser wire cutting pliers cut where a scissor will not reach. Once a fixation wire is twisted tight round the teeth or the bone, its ends have to be cut short, in places as tight as the space behind the last molar or against the side of an arch bar. Short side cutting jaws set at an angle come at the wire from the side, so the cut can be made flush against the twist.
Google AI Mode, read on 5 November 2026, describes the Obwegeser wire instruments as tools used in cranio-maxillofacial, oral and reconstructive surgery to handle, twist and cut metal suture and osteosynthesis wire. It gives the Obwegeser wire cutter as the one for cutting soft fixation and osteosynthesis wire, at about 11 to 12 cm, which matches our 12 cm.
Gemini, read the same day, places it in oral and maxillofacial, orthognathic and facial trauma surgery, on intermaxillary wire, arch bar ligatures and stainless steel osteosynthesis wire. It lists the Obwegeser wire cutter and the obwegeser wire cutting pliers 12cm as catalog names, and sets it apart from wire cutting scissors by its plier style side cutting jaws. Buyers type wire cutting pliers, or surgical wire cutter.
In use, the angled jaws are laid against the twist with the cutting edges across the wire, and one firm squeeze takes the end off. The cut stump is then pressed down against the teeth or the bar so it cannot catch the cheek. A pliers of this size cuts the soft and medium wire of jaw fixation; heavy cerclage wire needs the compound action cutter.
Key design features
Short angled side cutting jaws
Our photograph shows short jaws set at an angle, and the drawing beside them shows the cutting edges meeting along the side. Side cutting jaws can be laid flat against a twist or a bar, so the wire is cut flush, with no long end left to bend down. A flush cut leaves less stump for the Mershon wire pusher to tuck away, and less to catch the cheek.
Twelve centimeters
At 12 cm the pliers fit inside the mouth and reach the back teeth while the hand stays at the lips. AI Mode gives about 11 to 12 cm for the Obwegeser wire cutter, which is the size ours is made in.
Plain curved handles
The handles in our photograph are plain and curved. They sit in the palm, so a firm squeeze goes straight to the jaws. On soft and medium fixation wire, that single squeeze is enough to cut cleanly. The handles open again under the fingers, ready for the next ligature along the bar.
A cutter for the mouth
The pliers are small on purpose. A heavy compound action cutter is too big for the back of the mouth, and a scissor is too light for medium wire. The Obwegeser pattern sits between them, sized for the wire of jaw fixation. On a wiring tray, it is the cutter that cuts each ligature once it is twisted.
What the listing gives you
One pattern at one price, read off the listing on 5 November 2026. What it tells you is set out below, and where each detail was read from.
| What you get | Detail | Read from |
|---|---|---|
| Jaws | Short, angled, side cutting | Our photograph and its drawing |
| Handles | Plain and curved | Our photograph |
| Length | 12 cm | The product name |
| Options | One size | The listing |
| Price | 22 dollars | The order form |
Where it is used
AI Mode and Gemini, read on 5 November 2026, name these cases for the Obwegeser wire cutting pliers. The reasons in the last column are ours, read off the jaws and the length.
| Case | What it cuts | Why this one |
|---|---|---|
| Intermaxillary fixation | The twisted ends of the fixation wire | Side jaws cut flush |
| Arch bar ligatures | The ligature ends on the bar | 12 cm fits in the mouth |
| Osteosynthesis | Soft osteosynthesis wire | Named by AI Mode |
| Facial trauma | Wire ends behind the last molar | The angled jaws reach round |
What it does, and what it must not do
The Obwegeser wire cutting pliers cut soft and medium fixation wire. They are not for heavy cerclage wire, and they do not twist. On a wiring tray they sit beside the twisters, so each wire is twisted and then cut without a change of hand or a search for the right cutter.
| Job | Use the Obwegeser cutter? | What to use instead or beside it |
|---|---|---|
| Cutting fixation wire flush in the mouth | Yes | This is the job they are made for |
| Cutting soft ligature wire with a scissor | Beside it | The Harvey wire cutting scissors |
| Cutting heavy cerclage wire | No | The compound action wire cutting pliers |
| Twisting the wire tight first | No | The Berry or the wire twister pliers |
| Cutting bone | Never | A bone cutter |
How they compare with the rest of the wiring tray
Eight wiring instruments make up this family on our site. The working ends and handles are read off each listing’s own photograph, the options off the variations and the prices off the order form, on 5 November 2026.
| Instrument | Working end, from our photograph | Handle, from our photograph | Size or options | Price |
|---|---|---|---|---|
| Barmesh pliers | long, narrow tapering beaks | curved handles with gold colored tips | 13 cm | 22 dollars |
| Berry pliers | long narrow jaws, a cross hatched face in the drawing | gold colored ring handles with a ratchet | 19 cm | 28 dollars |
| Wire twister pliers | cross hatched jaws, Fig 1 narrow to Fig 3 broad | gold colored handles on a compound action joint | 18 cm, Fig 1, Fig 2 or Fig 3 | 45 dollars |
| Harvey scissors | short, stout blades with blunt rounded tips | ring handles | 12 cm | 20 dollars |
| Obwegeser cutter (this page) | short angled side cutting jaws | plain curved handles | 12 cm | 22 dollars |
| Compound action cutter | short angled cutting jaws on a compound action joint | gold colored handle ends | 17 cm, 22.5 cm or a set of both | 45, 55 or 95 dollars |
| Ligature wire | soft wire on a 10 m coil | none, the wire comes on a spool | 11 diameters from 0.2 to 1.5 mm | 18 dollars |
| Mershon wire pusher | bent tip ending in a notch | round handle | 15 cm | 20 dollars |
Materials and finish
Every Obwegeser wire cutting pliers we make is formed from high quality medical grade stainless steel. The steel itself is made to a German specification. We do not publish a grade number.
The Obwegeser wire cutting pliers have a plain steel finish. Look along the cutting edges before each case. An edge that has been chipped on wire too heavy for it leaves a ragged stump, and those pliers should be set aside. Keep heavy cerclage wire for the compound action cutter, and the small edges stay true.
Caring for it
Rinse the Obwegeser wire cutting pliers as soon as the case ends, before blood dries in the joint. Brush the jaws open and closed, wash them, dry them, and steam sterilize them on the normal cycle with the rest of the wiring tray. A drop of instrument lubricant keeps the joint smooth.
Ordering and wholesale
The Obwegeser wire cutting pliers is made by Adas Instruments in our own workshop and sold direct, which is why the price sits where it does against the catalog houses. Order one for a single tray, or in quantity for a hospital list or a distributor line. We do OEM work under your own brand and your own item numbers. Send us a sample and we will hold a run to your pattern rather than ours. Stock items ship from our own workshop. Backorder items take 10 to 12 working days to make. Every instrument carries a three year replacement warranty against manufacturing defects. Production is controlled under an ISO 13485 quality management system.
Frequently asked questions
What are the Obwegeser wire cutting pliers used for?
They cut soft fixation and osteosynthesis wire in cranio-maxillofacial, oral and reconstructive surgery, in AI Mode’s words. Gemini names intermaxillary wire and arch bar ligatures. Ours are 12 cm with side cutting jaws, at 22 dollars.
Is an Obwegeser wire cutter the same instrument?
Yes. AI Mode and Gemini both give the Obwegeser wire cutter as the name for this pattern. Cutter and cutting pliers describe the same small side cutting pliers, sized for the wire of jaw fixation.
Can the Obwegeser pliers cut heavy cerclage wire?
No. They are sized for soft and medium fixation wire in the mouth. Heavy cerclage wire round bone is cut with the compound action wire cutting pliers, whose double joint gives the force that wire needs.
Why are the Obwegeser jaws angled?
So the cutting edges can be laid flat against a twist or an arch bar and the wire cut flush. Straight jaws would come at the wire end on and leave a longer stump to press down against the teeth.
Can they be autoclaved?
Yes. They are stainless steel with no coating, and they go through the normal steam cycle with the rest of the tray. Dry the joint fully, and lubricate it now and then, so the jaws open by themselves when the squeeze is released.
Related products and categories
Three more wiring instruments from the same maxillofacial tray: the compound action wire cutting pliers, the soft ligature wire, 10 m and the Mershon wire pusher, 15 cm. The rest of the range is under maxillofacial instruments, which sits inside our ENT instruments.



Reviews
There are no reviews yet.