What the Hargis anterior border stripper is
The Hargis anterior border stripper is made for one edge of one bone. The ramus is the upright part of the lower jaw, and its front edge climbs from behind the last molar up toward the skull. Before a cut is made through the ramus, the periosteum and the muscle fixed to that edge have to be stripped off it, so the surgeon can see the bone and the saw or bur has a clean line to follow.
Google AI Mode, read on 4 November 2026, describes the Hargis anterior border stripper as an instrument used in oral and maxillofacial surgery to expose the anterior border of the mandibular ramus. It names orthognathic, reconstructive and chin surgery, and says it strips the periosteum and the attached muscles from the contour of the bone. It describes a V shaped or pronged tip shaped to the ascending ramus, which is what our photograph shows.
Gemini, read the same day, places it in oral and maxillofacial and orthognathic surgery, on the anterior border of the ramus and the bone beside it. It lists the Hargis mandibular stripper and the Hargis ramus periosteal elevator as catalog names. Buyers type the short hargis stripper, or the plain anterior border stripper and border stripper.
Key design features
A forked tip with a V notch
Our photograph shows the tip split into two points with a V notch between them, and the drawings beside it show the fork from the front and the side. The notch is set against the front edge of the ramus. As the stripper is pushed up along that edge, the two points lift the tissue from both faces of it at once.
An angled shank
The shank bends between the handle and the tip. That angle lets the fork reach up the front edge of the ramus from an incision in the mouth while the handle stays clear of the teeth and the lips. Without it, the hand would have to sit inside the mouth to keep the fork on the bone.
Nineteen centimeters
At 19 cm the stripper reaches from the incision behind the last molar up the full height of the front edge of the ramus. The length gives the surgeon a long, even stroke, which lifts the tissue as one layer rather than in tags that are harder to close over at the end of the case.
A handle that curls at the end
The handle in our photograph is solid and curls at its end. The curl gives the palm a stop when the fork is pushed up the bone, so the hand does not slide forward onto the shank. The Hargis periosteal elevator in our range carries a handle of the same kind.
What the listing gives you
One pattern at one price, read off the listing on 4 November 2026. What it tells you is set out below, and where each detail was read from.
| What you get | Detail | Read from |
|---|---|---|
| Tip | Forked, with a V notch between two points | Our photograph |
| Shank | Angled between the handle and the tip | Our photograph |
| Drawings | The fork from the front and from the side | Our photograph |
| Length | 19 cm | The product name |
| Price | 25 dollars, one size | The order form |
Where it is used
AI Mode and Gemini, read on 4 November 2026, name these cases for the Hargis stripper.
| Case | What it strips | Why this one |
|---|---|---|
| Sagittal split of the ramus | Periosteum and muscle on the front edge of the ramus | The fork sits on the edge |
| Orthognathic surgery | The anterior border before the cut | The angled shank reaches from the mouth |
| Reconstructive surgery of the lower jaw | Soft tissue on the bone beside the border | 19 cm reaches the full height |
| Chin surgery | Periosteum on the contour of the bone | Named by AI Mode |
What it does, and what it must not do
The Hargis anterior border stripper clears the front edge of the ramus. It is not a retractor and not a lever.
| Job | Use the Hargis stripper? | What to use instead or beside it |
|---|---|---|
| Stripping the front edge of the ramus | Yes | This is the job it is made for |
| Lifting periosteum round the lower border of the jaw | Beside it | The Hargis periosteal elevator |
| Stripping round the back border of the ramus | Beside it | The Obwegeser J-stripper |
| Holding the tissue back once it is stripped | No | A ramus retractor |
| Levering bone | Never | A bone lever |
How it compares with the rest of the tray
Ten maxillofacial instruments for fracture work, stripping, wiring and shaping bone make up this set on our site. The working ends are read off each listing’s own photograph, the options off the variations, the lengths off the name and the prices off the order form, on 4 November 2026.
| Instrument | Working end, from our photograph | Options on the listing | Length | Price |
|---|---|---|---|---|
| Hargis stripper (this page) | forked tip with a V notch on an angled shank, handle curling at the end | one size | 19 cm | 25 dollars |
| Gillies | long narrow flat blade bent near its rounded end, grooved handle | one size | 20 cm | 30 dollars |
| Dingman | narrow shaft curving gently at the tip, grooved handle | one size | 21 cm | 30 dollars |
| Rowe | flat bar with a closed loop at the top end and a ring handle | one size | 25 cm | 40 dollars |
| Obwegeser zygomatic arch awl | long curved shaft, pointed tip with an eye, fluted handle | one size | not given on the listing | 20 dollars |
| Obwegeser maxillary awl | slim shaft, pointed tip with an eye, ridged handle | 13, 15 or 17.5 cm | by option | 20, 24 or 17 dollars |
| Kelsey Fry straight | handle of a long wire loop, straight needle point | one size | 15 cm | 19 dollars |
| Kelsey Fry curved | handle of a long wire loop, needle point curving gently | one size | 18 cm | 19 dollars |
| Chompret syndesmotome | slim instrument with a hooked tip, flat handle | Fig 1, 2, 3 or 4 tip | 15 cm | 22 dollars |
| Nasal raspatory | a cross cut rasp at each end, gold colored middle grip | six grits, 3/4 to 9/10 | not given on the listing | 80 dollars |
Materials and finish
Every Hargis anterior border stripper we make is formed from high quality medical grade stainless steel. The steel itself is made to a German specification. We do not publish a grade number.
The Hargis anterior border stripper has a plain steel finish. Look at the two points of the fork before each case. If one has been bent out of line, the notch will not sit on the edge of the bone, and that stripper should be set aside.
Caring for it
Rinse the Hargis anterior border stripper as soon as the case ends, before blood dries in the notch of the fork. Brush into the V and along the shank, wash it, dry it, and steam sterilize it on the normal cycle with the rest of the tray.
Ordering and wholesale
The Hargis anterior border stripper is made by Adas Instruments in our own workshop and sold direct, which is why the price sits where it does against the catalog houses. Order one for a single tray, or in quantity for a hospital list or a distributor line. We do OEM work under your own brand and your own item numbers. Send us a sample and we will hold a run to your pattern rather than ours. Stock items ship from our own workshop. Backorder items take 10 to 12 working days to make. Every instrument carries a three year replacement warranty against manufacturing defects. Production is controlled under an ISO 13485 quality management system.
Frequently asked questions
What is the Hargis anterior border stripper used for?
It exposes the anterior border of the ramus of the lower jaw by stripping the periosteum and the attached muscle off it. AI Mode names orthognathic, reconstructive and chin surgery. Ours is the 19 cm pattern with a forked tip, at 25 dollars.
Why does the Hargis stripper have a forked tip?
AI Mode describes a V shaped or pronged tip shaped to the ascending ramus, and our photograph shows that fork. The notch sits on the front edge of the bone, so the two points lift the tissue from both faces of the edge in one stroke.
How is it different from the Hargis periosteal elevator?
The Hargis periosteal elevator has a hooked, cupped tip and works round the lower border of the jaw. The Hargis stripper has a forked tip and works up the front edge of the ramus. A tray for a sagittal split can carry both.
What is the anterior border of the ramus?
The ramus is the upright part of the lower jaw, behind the teeth. Its anterior border is the front edge, which climbs from behind the last molar toward the skull. Muscle is fixed along it, and that is what the stripper clears.
Can it be autoclaved?
Yes. The Hargis anterior border stripper is stainless steel with no coating, and it goes through the normal steam cycle with the rest of the tray. Brush into the notch, dry it fully, and store it so the points are not bent.
Related products and categories
Three more instruments from the same maxillofacial tray: the Gillies zygoma elevator, 20 cm, the Dingman zygoma elevator, 21 cm and the Rowe zygoma elevator, 25 cm. The rest of the range is under maxillofacial instruments, which sits inside our ENT instruments.




Reviews
There are no reviews yet.