What a Hargis retractor is
The Hargis mandibular body retractor works on the long horizontal part of the lower jaw, the body, between the chin and the angle. When that bone is plated after a fracture or rebuilt after a resection, the soft tissue and the masseter have to be held off it from below, and the blade needs to stay on a rounded edge of bone while the surgeon drills and fixes the plate.
Google AI Mode, read on 3 November 2026, calls the Hargis mandibular body retractor a highly specialized, hand held instrument for oral, maxillofacial and dental reconstructive surgery. Its job, it says, is to expose and pull back the tissue round the body of the lower jaw during reconstructive or trauma work. It describes a concave blade shaped to the lower border of the jaw and a tip that curves forward to hook onto the bone, so it grips without slipping.
Gemini, read the same day, gives the Hargis mandibular retractor and the Hargis inferior border retractor as catalog names. A buyer may type hargis retractor, or simply mandibular body retractor for the job it does.
Key design features
A deep curved blade
In our photograph the blade is broad and deeply curved, and the drawings beside it show its profile from the side and the front. The curve follows the rounded lower border of the jaw, so the blade lies along the bone rather than touching it at one point.
A tip that hooks under
The tip of the blade turns forward. Set under the lower border, it hooks the bone, and the pull of the assistant’s hand keeps it seated there. That is what lets the Hargis hold steady while the plate is placed, without sliding off the edge.
An open handle
The handle is open along its length and curves round at the end, in our photograph. The whole hand closes round it for a firm, steady pull from below the jaw, and the curved end gives the fingers a stop.
Eighteen centimeters
At 18 cm it reaches the body of the jaw from outside or inside the mouth with the hand clear of the field. That leaves room for the drill, the plate and the screwdriver, which all come in from the side. Order a second where both sides of the jaw are plated in one case, so the scrub nurse is not cleaning the first one mid way through.
Which one to order
The listing carries one size, read on 3 November 2026.
| What you get | Length | Working end | Price |
|---|---|---|---|
| Hargis mandibular body retractor | 18 cm | Deep curved blade, tip turned forward | 28 dollars |
| A second for the other side | 18 cm | The same | 28 dollars |
Where it is used
Gemini, read on 3 November 2026, places the Hargis in oral and maxillofacial, orthognathic and facial trauma surgery, on the masseter, the lower border of the jaw, the periosteum and the bone of the lower jaw.
| Case | What it holds | Why this blade |
|---|---|---|
| Plating a fracture of the body of the jaw | Soft tissue off the lower border | The tip hooks under the bone |
| Reconstruction after resection | The flap over the jaw | The curve follows the border |
| Orthognathic surgery of the lower jaw | The masseter and periosteum | A steady pull from below |
| Trauma repair of the lower jaw | Tissue over the fracture line | Room for the drill and plate |
What it holds back, and what it must not do
It holds tissue off the body of the lower jaw. It does not hold the cheek at the front of the mouth, and it is not a lever.
| Job | Use the Hargis? | What to use instead or beside it |
|---|---|---|
| Holding tissue off the lower border of the jaw | Yes | This is the job it is made for |
| Holding soft tissue at the chin | Beside it | An Obwegeser chin retractor |
| Holding a flap off the facial bones above | No | A double ended Tessier soft tissue retractor |
| Lifting a broken cheekbone | No | The Dingman zygomatic bone hook |
| Levering bone | Never | An elevator; the blade bends under that load |
How it compares with the rest of the family
Eleven Tessier, Hargis, Dingman and Seldin instruments make up this family on our site. The working ends are read off each listing’s own photograph, the options off the variations, the lengths off the name and the prices off the order form, on 3 November 2026.
| Retractor | Working end, from our photograph | Options on the listing | Length | Price |
|---|---|---|---|---|
| Tessier 12.5 cm black chromed | S shaped black band, a curved end at each side | one size | 12.5 cm | 18 dollars |
| Tessier 12 cm black | S shaped black band, a curved end at each side | five tip widths, 7 to 12 mm | 12 cm | 18 dollars |
| Tessier 15 cm | flat bar with a right angled blade at each end | one size | 15 cm | 18 dollars |
| Tessier 15.5 cm | flat bar with a right angled blade at each end | four blade pairs, or the set of four | 15.5 cm | 16 dollars, set 60 |
| Tessier 16 cm | flat bar with a right angled blade at each end | three blade pairs, or the set of three | 16 cm | 16 dollars, set 48 |
| Tessier orbital, malleable | flat strip with rounded ends, bent by hand | 10 to 12, 15 to 17 or 20 to 22 mm, or the set | not given on the listing | 11 to 32 dollars, set 56 |
| Tessier saddle, black | saddle shaped tip on a black round handle | 10, 17.5 or 20 mm | not given on the listing | 14 dollars |
| Saddle hooklets | saddle shaped tip on a ridged flat handle | 10 or 12 mm | not given on the listing | 14 dollars |
| Hargis 18 cm (this page) | deep curved blade with a turned tip, open handle | one size | 18 cm | 28 dollars |
| Dingman bone hook 19 cm | sharp hook on a slim shaft, open handle | Fig 1 or Fig 2 hook | 19 cm | 24 dollars |
| Seldin 19 cm | flat, gently curved blade on a flat handle | one size | 19 cm | 25 dollars |
Materials and finish
Every Hargis retractor we make is formed from high quality medical grade stainless steel. The steel itself is made to a German specification. We do not publish a grade number.
The finish is plain steel, with no coating to wear. The open handle is the part to look at after cleaning, because it is where water and debris collect if the instrument is packed wet. Dry it handle down so nothing stays inside.
Caring for it
Rinse it as soon as the case ends, before blood and bone dust dry inside the curve of the blade or the open handle. Brush the inside of the blade, the turned tip and the inside of the handle. Dry it, steam sterilize it on the normal instrument cycle, and look at the tip before it goes back on the tray; set it aside if the tip has opened out.
Ordering and wholesale
The Hargis retractor is made by Adas Instruments in our own workshop and sold direct, which is why the price sits where it does against the catalog houses. Order one for a single tray, or in quantity for a hospital list or a distributor line. We do OEM work under your own brand and your own item numbers. Send us a sample and we will hold a run to your pattern rather than ours. Stock items ship from our own workshop. Backorder items take 10 to 12 working days to make. Every instrument carries a three year replacement warranty against manufacturing defects. Production is controlled under an ISO 13485 quality management system.
Frequently asked questions
What is a Hargis retractor used for?
The Hargis mandibular body retractor exposes and pulls back the tissue round the body of the lower jaw in reconstructive and trauma surgery. AI Mode names oral, maxillofacial and dental reconstructive work, and Gemini adds orthognathic and facial trauma surgery. Ours is 18 cm.
How does the Hargis hold onto the jaw?
Its blade is deeply curved to follow the lower border of the jaw, and the tip turns forward to hook under the bone. Once it is set, the assistant’s pull keeps it seated, so it stays put while the plate and screws go in.
Is a mandibular body retractor the same as a Hargis?
Mandibular body retractor is the plain name for the job, holding tissue off the body of the lower jaw, and the Hargis is the pattern by name. Gemini also lists it as the Hargis inferior border retractor, after the edge it hooks.
How is the Hargis different from an Obwegeser chin retractor?
Gemini puts the difference in the blade. The Hargis has a deep concave blade with a forward curved tip that locks under the lower border for a heavy pull. The Obwegeser chin retractor has a broader curve made for the chin itself.
Can it be autoclaved?
Yes. It is one piece of stainless steel with no joint, screw or coating, and it goes through the normal steam cycle with the rest of the tray. Rinse it, brush inside the blade and the handle, and dry it before it is packed.
Related products and categories
Three more instruments from the same family: the Dingman zygomatic bone hook, the Seldin periosteal retractor and the Tessier soft tissue retractor, 12.5 cm black chromed. The rest of the range is under maxillofacial instruments, which sits inside our ENT instruments.


Reviews
There are no reviews yet.