What a Seldin retractor is
The Seldin periosteal retractor does two jobs at the same site. After the incision in the gum, its blade slides under the mucoperiosteum and lifts it off the bone; then the same blade, turned against the flap, holds it back while the surgeon works. Ours is the single ended 19 cm pattern, so one blade does both. The flap stays on the same instrument from the moment it is raised until the work on the bone is done, which saves a change of instruments in a small, wet field.
Google AI Mode, read on 3 November 2026, calls the Seldin retractor, which it also calls the Seldin periosteal elevator, a highly versatile hand held instrument for oral, maxillofacial and dental surgery. It says it is made to lift and hold back soft tissue flaps such as the mucoperiosteum after the incision, for a clear view of the bone. It describes the double ended number 23 pattern; ours is single ended, as our photograph shows.
Gemini, read the same day, places it in oral and maxillofacial surgery, periodontics and dental implant work, on the mucoperiosteal flap, the periosteum and the surface of the bone. Search Console shows buyers typing seldin retractor oral surgery and seldin retractor dental, and the plain class name periosteal retractor.
Key design features
A flat, gently curved blade
In our photograph the blade is flat and broad, with a gentle curve toward the tip, and the drawings beside it show the curve from the side. The flat face slides under the flap and lies along the bone, and the curve lets it hold the flap back without a sharp edge pressing on it.
Single ended
Ours has one working end on a flat handle. The double ended number 23 pattern that the AI answers describe carries a smaller end as well; this one does not, so the whole length of the handle is for the hand. A single end also means there is no second blade pointing back at the palm while the flap is held, which the hand notices on a long case.
A flat handle
The handle is flat and long in our photograph. It is held like a pen to lift the flap and with the whole hand to hold it back, and the flat shape keeps it from rolling on the tray.
Nineteen centimeters
At 19 cm it reaches the back of the mouth with the hand outside the lips. That leaves the front of the mouth free for the suction and the bur during an extraction or an implant. In a small mouth the assistant can choke up on the flat handle and hold closer to the blade, and in a large one hold at the end for reach.
Which one to order
The listing carries one size, read on 3 November 2026.
| What you get | Length | Working end | Price |
|---|---|---|---|
| Seldin periosteal retractor | 19 cm | One flat, gently curved blade | 25 dollars |
| A spare for a second tray | 19 cm | The same | 25 dollars |
Where it is used
Gemini, read on 3 November 2026, places the 19 cm Seldin in oral and maxillofacial surgery, periodontics and dental implant work, on the mucoperiosteal flap, the periosteum and the surface of the bone.
| Case | What it lifts and holds | Why this blade |
|---|---|---|
| Surgical extraction | The mucoperiosteal flap over the tooth | Lifts the flap, then holds it |
| Implant placement | The flap over the ridge | Lies flat along the bone |
| Periodontal surgery | The gum flap | A gentle curve, no sharp edge |
| Oral surgery on the jaws | The periosteum off the bone | The 19 cm reach |
What it holds back, and what it must not do
It lifts and holds a flap. It is not a lever for teeth, and it does not cut.
| Job | Use the Seldin? | What to use instead or beside it |
|---|---|---|
| Lifting and holding a mucoperiosteal flap | Yes | This is the job it is made for |
| Hooking under the lower border of the jaw | No | The Hargis mandibular body retractor |
| Holding a skin flap edge on the face | No | A saddle hooklet |
| Elevating a tooth | Never | A dental elevator |
| Cutting the incision | No | A scalpel; the Seldin goes in after it |
How it compares with the rest of the family
Eleven Tessier, Hargis, Dingman and Seldin instruments make up this family on our site. The working ends are read off each listing’s own photograph, the options off the variations, the lengths off the name and the prices off the order form, on 3 November 2026.
| Retractor | Working end, from our photograph | Options on the listing | Length | Price |
|---|---|---|---|---|
| Tessier 12.5 cm black chromed | S shaped black band, a curved end at each side | one size | 12.5 cm | 18 dollars |
| Tessier 12 cm black | S shaped black band, a curved end at each side | five tip widths, 7 to 12 mm | 12 cm | 18 dollars |
| Tessier 15 cm | flat bar with a right angled blade at each end | one size | 15 cm | 18 dollars |
| Tessier 15.5 cm | flat bar with a right angled blade at each end | four blade pairs, or the set of four | 15.5 cm | 16 dollars, set 60 |
| Tessier 16 cm | flat bar with a right angled blade at each end | three blade pairs, or the set of three | 16 cm | 16 dollars, set 48 |
| Tessier orbital, malleable | flat strip with rounded ends, bent by hand | 10 to 12, 15 to 17 or 20 to 22 mm, or the set | not given on the listing | 11 to 32 dollars, set 56 |
| Tessier saddle, black | saddle shaped tip on a black round handle | 10, 17.5 or 20 mm | not given on the listing | 14 dollars |
| Saddle hooklets | saddle shaped tip on a ridged flat handle | 10 or 12 mm | not given on the listing | 14 dollars |
| Hargis 18 cm | deep curved blade with a turned tip, open handle | one size | 18 cm | 28 dollars |
| Dingman bone hook 19 cm | sharp hook on a slim shaft, open handle | Fig 1 or Fig 2 hook | 19 cm | 24 dollars |
| Seldin 19 cm (this page) | flat, gently curved blade on a flat handle | one size | 19 cm | 25 dollars |
Materials and finish
Every Seldin retractor we make is formed from high quality medical grade stainless steel. The steel itself is made to a German specification. We do not publish a grade number.
The finish is plain steel, with no coating. Look at the edge of the blade before each case: it should be smooth, so it lifts the flap without tearing it.
Caring for it
Rinse it as soon as the case ends, before blood and bone dust dry on the blade. Brush both faces of the blade and the neck, dry it, and steam sterilize it on the normal instrument cycle. Look at the blade before it goes back on the tray; set it aside if the edge has been nicked or the curve bent.
Ordering and wholesale
The Seldin retractor is made by Adas Instruments in our own workshop and sold direct, which is why the price sits where it does against the catalog houses. Order one for a single tray, or in quantity for a hospital list or a distributor line. We do OEM work under your own brand and your own item numbers. Send us a sample and we will hold a run to your pattern rather than ours. Stock items ship from our own workshop. Backorder items take 10 to 12 working days to make. Every instrument carries a three year replacement warranty against manufacturing defects. Production is controlled under an ISO 13485 quality management system.
Frequently asked questions
What is a Seldin retractor used for?
The Seldin periosteal retractor lifts the mucoperiosteum off the bone after the incision and then holds it back, so the surgeon can see and reach the bone. AI Mode names oral, maxillofacial and dental surgery, and Gemini adds periodontics and implant work. Ours is 19 cm.
Is the Seldin retractor the same as a Seldin periosteal elevator?
AI Mode uses the two names for the same instrument, because it does both jobs: it elevates the periosteum and then retracts the flap. Our listing calls it a periosteal retractor; we also list a Seldin elevator on its own page.
Is this Seldin single or double ended?
Single ended. Our photograph shows one flat, gently curved blade on a flat handle. The double ended number 23 pattern that the AI answers describe is a different pattern, with a smaller second end for starting the flap.
How is it different from a Molt periosteal elevator?
Gemini puts it in the blade. The Seldin has a wide, flat, curved blade that holds the flap back cleanly. The Molt number 9 has a sharp, narrow end made to start lifting the flap rather than to hold it. A tray can carry both.
Can it be autoclaved?
Yes. It is stainless steel with no joint, screw or coating, and it goes through the normal steam cycle with the rest of the tray. Rinse it as soon as the case ends, brush both faces of the blade, and dry it before it is packed.
Related products and categories
Three more instruments from the same family: the Tessier soft tissue retractor, 12.5 cm black chromed, the Tessier soft tissue retractor, 12 cm black and the Tessier soft tissue retractor, 15 cm. The rest of the range is under maxillofacial instruments, which sits inside our ENT instruments.


Reviews
There are no reviews yet.