What a Tessier soft tissue retractor is
The Tessier soft tissue retractor is a flat bar with a blade turned down at each end. One end goes into the wound and holds the flap back; when the depth or the width of the wound changes, the assistant turns the bar over and uses the other end. Our 15 cm version is the plain steel pattern with one blade pair, and there is nothing on it to come loose.
Google AI Mode, read on 3 November 2026, calls the Tessier soft tissue retractor a highly specialized instrument for craniofacial, oral and maxillofacial surgery. It describes the job as holding back skin and muscular flaps to give the surgeon visibility and access to the bone in head and neck reconstruction, and it describes it as double ended. For the tessier soft tissue retractor 15cm it gives 15 to 15.5 cm as the length.
Gemini, read the same day, calls this length the standard Tessier soft tissue retractor and lists it for craniofacial, facial plastic and oral and maxillofacial surgery. A buyer looking for a craniofacial retractor for the soft tissue of the face is looking for this pattern.
Key design features
A blade at each end
In our photograph the bar is flat and each end is bent down at a right angle, the two ends turned opposite ways. That is the double end. The assistant holds the middle of the bar and works with whichever end suits the wound, then turns it over without reaching for a second instrument.
Two blade sizes
The two blades are not the same size: one is shorter and narrower, the other longer and wider. The small end suits a short incision or a shallow flap; the large one holds a broader flap or reaches deeper. Our listing carries this version as one size, so both blades come on the one bar.
Fifteen centimeters
At 15 cm the bar is long enough to hold from outside the wound and short enough to keep close to the face. Our 15.5 cm and 16 cm Tessier retractors carry the same pattern with a choice of blade pairs, for a team that wants several sizes on the tray.
Flat, with nothing to loosen
The retractor is a single flat bar, with no joint, no screw and no ratchet. It lies flat on the tray and on the drape, and it can be checked for straightness by eye. The flat middle is also where the assistant’s fingers go, so the hold is steady without a separate handle.
Which one to order
The Tessier soft tissue retractors on our site, read on 3 November 2026. This page sells the 15 cm, one size.
| What you get | Length | Blades | Price |
|---|---|---|---|
| Tessier soft tissue retractor, this page | 15 cm | One pair, small and large | 18 dollars |
| Tessier soft tissue retractor | 15.5 cm | Four pairs to choose from, or the set | 16 dollars a pair, 60 dollars the set |
| Tessier soft tissue retractor | 16 cm | Three pairs to choose from, or the set | 16 dollars a pair, 48 dollars the set |
Where it is used
Gemini, read on 3 November 2026, places the 15 cm Tessier in craniofacial, facial plastic and oral and maxillofacial surgery, on the periosteum, the cheek mucosa, the lip flaps and the surface muscles of the face.
| Case | What it holds | Which end |
|---|---|---|
| Craniofacial reconstruction | Skin and muscle flaps over the facial bones | Large end for a broad flap |
| Facial fracture repair | Soft tissue over the fracture line | By the depth of the wound |
| Surgery through the mouth | Cheek mucosa and lip flaps | Small end in a short incision |
| Facial plastic surgery | Periosteum and surface muscle | Either end, turned as the field changes |
What it holds back, and what it must not do
It holds soft tissue off the bone. It is not a bone lever, it does not bend to shape, and it does not hold itself.
| Job | Use the Tessier 15 cm? | What to use instead or beside it |
|---|---|---|
| Holding a skin or muscle flap off the facial bones | Yes | This is the job it is made for |
| A choice of blade pairs on one tray | Beside it | The 15.5 cm or 16 cm Tessier |
| Shaping a blade to the orbit | No | The Tessier orbital retractor, malleable |
| A gentle hold on a thin skin edge | No | A saddle hooklet |
| Levering bone | Never | An elevator; the blade bends under that load |
How it compares with the rest of the family
Eleven Tessier, Hargis, Dingman and Seldin instruments make up this family on our site. The working ends are read off each listing’s own photograph, the options off the variations, the lengths off the name and the prices off the order form, on 3 November 2026.
| Retractor | Working end, from our photograph | Options on the listing | Length | Price |
|---|---|---|---|---|
| Tessier 12.5 cm black chromed | S shaped black band, a curved end at each side | one size | 12.5 cm | 18 dollars |
| Tessier 12 cm black | S shaped black band, a curved end at each side | five tip widths, 7 to 12 mm | 12 cm | 18 dollars |
| Tessier 15 cm (this page) | flat bar with a right angled blade at each end | one size | 15 cm | 18 dollars |
| Tessier 15.5 cm | flat bar with a right angled blade at each end | four blade pairs, or the set of four | 15.5 cm | 16 dollars, set 60 |
| Tessier 16 cm | flat bar with a right angled blade at each end | three blade pairs, or the set of three | 16 cm | 16 dollars, set 48 |
| Tessier orbital, malleable | flat strip with rounded ends, bent by hand | 10 to 12, 15 to 17 or 20 to 22 mm, or the set | not given on the listing | 11 to 32 dollars, set 56 |
| Tessier saddle, black | saddle shaped tip on a black round handle | 10, 17.5 or 20 mm | not given on the listing | 14 dollars |
| Saddle hooklets | saddle shaped tip on a ridged flat handle | 10 or 12 mm | not given on the listing | 14 dollars |
| Hargis 18 cm | deep curved blade with a turned tip, open handle | one size | 18 cm | 28 dollars |
| Dingman bone hook 19 cm | sharp hook on a slim shaft, open handle | Fig 1 or Fig 2 hook | 19 cm | 24 dollars |
| Seldin 19 cm | flat, gently curved blade on a flat handle | one size | 19 cm | 25 dollars |
Materials and finish
Every Tessier soft tissue retractor we make is formed from high quality medical grade stainless steel. The steel itself is made to a German specification. We do not publish a grade number.
The finish is plain steel. The bar and both blades are one piece, so there is no joint at either bend.
Caring for it
Rinse it as soon as the case ends, before blood dries in the bend of either blade. Brush both faces of each blade and the inside of each bend. Dry it, steam sterilize it on the normal instrument cycle, and sight along the bar before it goes back on the tray. A blade that has been bent off its right angle will not hold a flap, so set it aside rather than bend it back by hand.
Ordering and wholesale
The Tessier soft tissue retractor is made by Adas Instruments in our own workshop and sold direct, which is why the price sits where it does against the catalog houses. Order one for a single tray, or in quantity for a hospital list or a distributor line. We do OEM work under your own brand and your own item numbers. Send us a sample and we will hold a run to your pattern rather than ours. Stock items ship from our own workshop. Backorder items take 10 to 12 working days to make. Every instrument carries a three year replacement warranty against manufacturing defects. Production is controlled under an ISO 13485 quality management system.
Frequently asked questions
What is a Tessier soft tissue retractor used for?
It holds back skin and muscle flaps so the surgeon can see the bone, in craniofacial, oral and maxillofacial surgery. AI Mode names head and neck reconstruction, and Gemini adds facial plastic surgery and work on the cheek mucosa and lip flaps. Ours is the 15 cm double ended version.
Why is the Tessier retractor double ended?
So one instrument carries two blade sizes. Our photograph shows a flat bar with a right angled blade at each end, one smaller than the other. The assistant turns it over when the wound needs the other size, without asking for a second retractor.
Should I order the 15 cm, the 15.5 cm or the 16 cm Tessier?
The 15 cm on this page is one size with one blade pair, at 18 dollars. The 15.5 cm and 16 cm come in a choice of blade pairs at 16 dollars each, or as a set, for a team that wants every size on the tray.
Is a craniofacial retractor the same thing?
Craniofacial retractor is the class name, and the Tessier soft tissue retractor is the pattern catalogs list under it for the soft tissue of the face. Gemini calls this length the standard Tessier soft tissue retractor.
Can it be autoclaved?
Yes. It is one piece of stainless steel with no joint, screw or coating, and it goes through the normal steam cycle with the rest of the tray. Rinse it, brush inside both bends, and dry it before it is packed.
Related products and categories
Three more instruments from the same family: the Tessier soft tissue retractor, 15.5 cm, the Tessier soft tissue retractor, 16 cm and the Tessier orbital retractor, malleable. The rest of the range is under maxillofacial instruments, which sits inside our ENT instruments.



Reviews
There are no reviews yet.