What a Tessier orbital retractor is
The Tessier malleable retractor is the bendable Tessier. The bone round the eye is curved in every direction, and a rigid blade touches it at one point. A strip of soft steel can be bent at the table to lie along the orbital floor or round the rim, and bent again for the next step. Ours is listed as the Tessier orbital retractor, after the place it is made for.
Google AI Mode, read on 3 November 2026, calls the Tessier orbital retractor, which it also calls the Tessier malleable ribbon retractor, a highly flexible craniofacial instrument for delicate soft tissue displacement and protection of the globe in facial and orbital reconstruction. It describes surgeons bending the blade during the operation to fit the orbital rim, the zygoma or the maxilla, and it gives blade widths from 10 to 20 mm, which match our three.
Gemini, read the same day, places it in craniofacial, orbital reconstructive and ophthalmic plastic surgery, on the orbital fat, the periorbita and the muscles of the eye. A buyer may type orbital retractor or orbital malleable retractor.
Key design features
A strip that bends
In our photograph the retractor is a flat, straight strip with rounded ends. It comes straight, and the surgeon or the scrub nurse bends it by hand to the curve the case needs. Bend it in a smooth arc rather than a sharp fold, and it can be straightened and bent again.
Three widths
Fig. A is 10 to 12 mm wide, Fig. B 15 to 17 mm and Fig. C 20 to 22 mm. The narrow strip suits the orbital floor in a small orbit or a child; the wide one holds more tissue back over the rim and the cheekbone. The listing gives each width as a range; ask us if you need the exact figure at each end.
The set of three
The set of three is 56 dollars, against 11, 13 and 32 dollars bought one at a time. For an orbital case that moves from the floor to the rim, the set puts all three widths on the tray.
Rounded ends
Both ends are rounded, as our photograph shows, so the end that sits against the orbital contents has no corner. The AI Mode answer describes a thin strip with smooth, rounded edges for the same reason.
Which width to order
The four variations on the listing, read on 3 November 2026. The listing gives no length.
| Variation | Width | Where it suits | Price |
|---|---|---|---|
| Fig. A | 10 to 12 mm | The orbital floor in a small orbit | 11 dollars |
| Fig. B | 15 to 17 mm | The orbital floor and walls | 13 dollars |
| Fig. C | 20 to 22 mm | The rim and the cheekbone | 32 dollars |
| Set of 3 | All three | A full orbital case | 56 dollars |
Where it is used
Gemini, read on 3 November 2026, places the Tessier orbital retractor in craniofacial, orbital reconstructive and ophthalmic plastic surgery, on the orbital fat, the periorbita and the muscles of the eye.
| Case | What it holds | Width to start with |
|---|---|---|
| Repair of an orbital floor fracture | The orbital fat and periorbita | Fig. A or Fig. B |
| Orbital reconstruction | The contents of the orbit, off the wall | Fig. B |
| Surgery on the cheekbone and the rim | Soft tissue over the rim | Fig. C |
| Craniofacial surgery round the orbit | Tissue over the upper jaw | By the size of the orbit |
What it holds back, and what it must not do
It holds soft tissue and the orbital contents back. It is not a lever, and it is not a rigid blade.
| Job | Use the Tessier malleable? | What to use instead or beside it |
|---|---|---|
| Holding the orbital contents off the wall | Yes | This is the job it is made for |
| A rigid blade at a fixed angle | No | A double ended Tessier soft tissue retractor |
| A gentle hold on a thin skin edge | No | A saddle hooklet |
| Lifting a broken cheekbone | No | The Dingman zygomatic bone hook |
| Levering bone | Never | An elevator; the strip is made to bend |
How it compares with the rest of the family
Eleven Tessier, Hargis, Dingman and Seldin instruments make up this family on our site. The working ends are read off each listing’s own photograph, the options off the variations, the lengths off the name and the prices off the order form, on 3 November 2026.
| Retractor | Working end, from our photograph | Options on the listing | Length | Price |
|---|---|---|---|---|
| Tessier 12.5 cm black chromed | S shaped black band, a curved end at each side | one size | 12.5 cm | 18 dollars |
| Tessier 12 cm black | S shaped black band, a curved end at each side | five tip widths, 7 to 12 mm | 12 cm | 18 dollars |
| Tessier 15 cm | flat bar with a right angled blade at each end | one size | 15 cm | 18 dollars |
| Tessier 15.5 cm | flat bar with a right angled blade at each end | four blade pairs, or the set of four | 15.5 cm | 16 dollars, set 60 |
| Tessier 16 cm | flat bar with a right angled blade at each end | three blade pairs, or the set of three | 16 cm | 16 dollars, set 48 |
| Tessier orbital, malleable (this page) | flat strip with rounded ends, bent by hand | 10 to 12, 15 to 17 or 20 to 22 mm, or the set | not given on the listing | 11 to 32 dollars, set 56 |
| Tessier saddle, black | saddle shaped tip on a black round handle | 10, 17.5 or 20 mm | not given on the listing | 14 dollars |
| Saddle hooklets | saddle shaped tip on a ridged flat handle | 10 or 12 mm | not given on the listing | 14 dollars |
| Hargis 18 cm | deep curved blade with a turned tip, open handle | one size | 18 cm | 28 dollars |
| Dingman bone hook 19 cm | sharp hook on a slim shaft, open handle | Fig 1 or Fig 2 hook | 19 cm | 24 dollars |
| Seldin 19 cm | flat, gently curved blade on a flat handle | one size | 19 cm | 25 dollars |
Materials and finish
Every Tessier malleable retractor we make is formed from high quality medical grade stainless steel. The steel itself is made to a German specification. We do not publish a grade number.
The finish is plain steel. The strip is made soft enough to bend by hand. Bending it back and forth in the same place, again and again will work harden it, so straighten it gently and set it aside if it kinks.
Caring for it
Rinse it as soon as the case ends and straighten it by hand before it dries, so blood does not set in a bend. Brush both faces and the edges, dry it, and steam sterilize it on the normal instrument cycle, packed flat. Look along the strip before it goes back on the tray; set aside one with a kink or a crack at an old bend.
Ordering and wholesale
The Tessier malleable retractor is made by Adas Instruments in our own workshop and sold direct, which is why the price sits where it does against the catalog houses. Order one for a single tray, or in quantity for a hospital list or a distributor line. We do OEM work under your own brand and your own item numbers. Send us a sample and we will hold a run to your pattern rather than ours. Stock items ship from our own workshop. Backorder items take 10 to 12 working days to make. Every instrument carries a three year replacement warranty against manufacturing defects. Production is controlled under an ISO 13485 quality management system.
Frequently asked questions
What is a Tessier malleable retractor used for?
It holds soft tissue and the contents of the orbit back during facial and orbital reconstruction. The surgeon bends it to follow the orbital rim, the cheekbone or the upper jaw. AI Mode calls it the Tessier orbital retractor or the Tessier malleable ribbon retractor.
Which Tessier orbital retractor width do I need?
Fig. A, 10 to 12 mm, suits the floor of a small orbit. Fig. B, 15 to 17 mm, covers the floor and the walls. Fig. C, 20 to 22 mm, holds the rim and the cheekbone. The set of three is 56 dollars.
Can I bend the Tessier malleable strip more than once?
Yes. It is made to be bent by hand and straightened again. Bend it in a smooth arc, not a sharp fold, and straighten it gently after the case. Set it aside if it kinks or cracks at an old bend.
How is it different from a ribbon retractor?
A ribbon retractor is the general malleable strip of abdominal and general surgery. Gemini sets the Tessier orbital retractor apart by its set widths, 10 to 12, 15 to 17 and 20 to 22 mm, and rounded edges made for the orbital wall.
Can it be autoclaved?
Yes. It is stainless steel with no joint, screw or coating, and it goes through the normal steam cycle with the rest of the tray. Straighten it, rinse and brush it, and dry it before it is packed flat.
Related products and categories
Three more instruments from the same family: the Tessier saddle retractor, black, the saddle hooklets and the Hargis mandibular body retractor. The rest of the range is under maxillofacial instruments, which sits inside our ENT instruments.


Reviews
There are no reviews yet.