What a Tessier saddle retractor is
Tessier saddle hooklets do the job of a skin hook without its point. A skin hook holds a flap edge at one spot and can tear thin skin; a saddle holds the same edge along its whole width. On the face, where the skin is thin and every mark shows, that is the reason to use one. The assistant sets the saddle under the edge and pulls gently toward the hand, and the flap lifts along the width of the saddle rather than at a single puncture. On a scalp flap the same hold keeps the edge from rolling under.
Google AI Mode, read on 3 November 2026, calls the Tessier saddle retractor, which it also calls a Tessier saddle hooklet, a highly specialized instrument for plastic, reconstructive and craniofacial surgery. It describes a broad curved saddle blade that spreads the pressure evenly, unlike a sharp skin hook, for delicate skin flaps, and a black finish for glare under strong operating room lights.
Gemini, read the same day, gives the Tessier black saddle retractor as a catalog name and places it in craniofacial surgery, nasal reconstruction and facial trauma, on the tissue over the bridge of the nose, the edges of scalp flaps and thick edges of periosteum. A buyer may simply ask for a saddle retractor.
Key design features
A saddle at the tip
In our photograph the tip is a short, curved saddle with a hollow in the middle and a raised edge at each side, and the drawing beside it shows the saddle from the end. The hollow sits over the edge of the flap and the two sides keep it from sliding off.
Three saddle widths
The listing carries 10, 17.5 and 20 mm saddles, all at 14 dollars. The 10 mm suits a short flap at the nose or the eyelid. The 17.5 and 20 mm hold a longer edge, such as a scalp flap, with the pull spread over more skin.
A black finish
Handle, shaft and saddle are black in our photograph, which is what the listing name says. A dark instrument does not flash under the lamp. Both aliases Gemini gives for it, the Tessier black saddle retractor and the anti-glare Tessier saddle blade, name the finish first, which is how buyers tell it from the bright steel pattern.
A slim round handle
The handle is slim and round, held like a pencil. A saddle hooklet is held with a light pull from the fingertips, not the whole hand, and a slim handle gives that kind of control. Our plain steel saddle hooklets have a ridged flat handle instead.
Which width to order
The three variations on the listing, read on 3 November 2026. All cost the same.
| Saddle on the listing | Width | Where it suits | Price |
|---|---|---|---|
| 10 mm | 10 mm | A short flap at the nose or the eyelid | 14 dollars |
| 17.5 mm | 17.5 mm | A facial flap edge | 14 dollars |
| 20 mm | 20 mm | A long edge, such as a scalp flap | 14 dollars |
Where it is used
Gemini, read on 3 November 2026, places the black Tessier saddle retractor in craniofacial surgery, nasal reconstruction and facial trauma surgery. The cases below follow the tissue it names.
| Case | What it holds | Width to start with |
|---|---|---|
| Nasal reconstruction | The skin over the bridge of the nose | 10 mm |
| Craniofacial surgery | The edges of a scalp flap | 20 mm |
| Facial trauma repair | Thick edges of periosteum | 17.5 mm |
| Facial plastic surgery | A thin skin flap edge | 10 or 17.5 mm |
What it holds back, and what it must not do
It holds the edge of a flap. It does not hold a deep flap off the bone, and it is not a lever.
| Job | Use the Tessier saddle? | What to use instead or beside it |
|---|---|---|
| Holding a thin skin flap edge | Yes | This is the job it is made for |
| The same saddle in plain steel | Beside it | The saddle hooklets, 10 or 12 mm |
| Holding a deep flap off the bone | No | A double ended Tessier soft tissue retractor |
| Lifting a broken cheekbone | No | The Dingman zygomatic bone hook |
| Levering bone | Never | An elevator; the saddle bends under that load |
How it compares with the rest of the family
Eleven Tessier, Hargis, Dingman and Seldin instruments make up this family on our site. The working ends are read off each listing’s own photograph, the options off the variations, the lengths off the name and the prices off the order form, on 3 November 2026.
| Retractor | Working end, from our photograph | Options on the listing | Length | Price |
|---|---|---|---|---|
| Tessier 12.5 cm black chromed | S shaped black band, a curved end at each side | one size | 12.5 cm | 18 dollars |
| Tessier 12 cm black | S shaped black band, a curved end at each side | five tip widths, 7 to 12 mm | 12 cm | 18 dollars |
| Tessier 15 cm | flat bar with a right angled blade at each end | one size | 15 cm | 18 dollars |
| Tessier 15.5 cm | flat bar with a right angled blade at each end | four blade pairs, or the set of four | 15.5 cm | 16 dollars, set 60 |
| Tessier 16 cm | flat bar with a right angled blade at each end | three blade pairs, or the set of three | 16 cm | 16 dollars, set 48 |
| Tessier orbital, malleable | flat strip with rounded ends, bent by hand | 10 to 12, 15 to 17 or 20 to 22 mm, or the set | not given on the listing | 11 to 32 dollars, set 56 |
| Tessier saddle, black (this page) | saddle shaped tip on a black round handle | 10, 17.5 or 20 mm | not given on the listing | 14 dollars |
| Saddle hooklets | saddle shaped tip on a ridged flat handle | 10 or 12 mm | not given on the listing | 14 dollars |
| Hargis 18 cm | deep curved blade with a turned tip, open handle | one size | 18 cm | 28 dollars |
| Dingman bone hook 19 cm | sharp hook on a slim shaft, open handle | Fig 1 or Fig 2 hook | 19 cm | 24 dollars |
| Seldin 19 cm | flat, gently curved blade on a flat handle | one size | 19 cm | 25 dollars |
Materials and finish
Every Tessier saddle retractor we make is formed from high quality medical grade stainless steel. The steel itself is made to a German specification. We do not publish a grade number.
The black is a surface finish on the steel. Treat it as you would any coated instrument: no wire brushes and no abrasive pastes, which wear it through at the saddle. The saddle width is part of the variation you order, so mark each one on the tray if you keep several.
Caring for it
Rinse it as soon as the case ends, before blood dries in the hollow of the saddle. Clean it with a soft brush, inside the saddle and along the shaft. Dry it and steam sterilize it on the normal instrument cycle. Look at the saddle before it goes back on the tray, and set it aside if the edges have been bent or the black has worn through.
Ordering and wholesale
The Tessier saddle retractor is made by Adas Instruments in our own workshop and sold direct, which is why the price sits where it does against the catalog houses. Order one for a single tray, or in quantity for a hospital list or a distributor line. We do OEM work under your own brand and your own item numbers. Send us a sample and we will hold a run to your pattern rather than ours. Stock items ship from our own workshop. Backorder items take 10 to 12 working days to make. Every instrument carries a three year replacement warranty against manufacturing defects. Production is controlled under an ISO 13485 quality management system.
Frequently asked questions
What is a Tessier saddle retractor used for?
It holds the edge of a skin flap in plastic, reconstructive and craniofacial surgery, with a broad saddle instead of a sharp point. AI Mode says the saddle spreads the pressure evenly, unlike a sharp skin hook. Ours is black, in 10, 17.5 and 20 mm.
Is a Tessier saddle hooklet the same thing?
Yes. AI Mode gives the Tessier saddle hooklet as another name in its first sentence, and Gemini adds the Tessier black saddle retractor. Our listing web address uses the plural, Tessier saddle hooklets, for the same instrument.
Which saddle width should I order?
The 10 mm suits a short flap at the nose or the eyelid. The 17.5 mm holds a facial flap edge, and the 20 mm a long edge such as a scalp flap. Each is 14 dollars, so a tray can carry all three.
How is the black saddle different from the plain saddle hooklets?
The saddle works the same way. Ours differ in finish, handle and sizes: this one is black with a slim round handle in 10, 17.5 and 20 mm, and the plain steel saddle hooklets have a ridged flat handle in 10 and 12 mm.
Can it be autoclaved?
Yes. It is stainless steel with a black finish and no joint or screw, and it goes through the normal steam cycle with the rest of the tray. Clean the saddle with a soft brush and dry it before it is packed.
Related products and categories
Three more instruments from the same family: the saddle hooklets, the Hargis mandibular body retractor and the Dingman zygomatic bone hook. The rest of the range is under maxillofacial instruments, which sits inside our ENT instruments.



Reviews
There are no reviews yet.