What a Tessier retractor is
Tessier soft tissue retractors are sold in pairs of blade sizes, because one wound in the face changes size as the operation goes on. A short cut over the orbital rim, a long one along the jaw and a deep pocket over the cheekbone each want a different blade. Ours come four ways at 15.5 cm, and the set of four puts every pair on one tray.
Search for tessier retractor and page one splits between two instruments: this double ended soft tissue pattern and the malleable orbital ribbon. Google AI Mode, read on 3 November 2026, places the soft tissue pattern in craniofacial, oral and maxillofacial surgery, for holding back skin and muscular flaps over the bone in head and neck reconstruction. For the 15 to 15.5 cm length it names craniofacial, maxillofacial and plastic surgery and the controlled displacement of soft tissue in a narrow field.
Gemini, read the same day, lists the tessier soft tissue retractor 15.5cm under a second name, the Tessier midface double retractor, and says why it is double ended: the surgeon turns it over to change blade depth or width during the case.
Key design features
A blade at each end
In our photograph each of our Tessier soft tissue retractors is a flat bar, and each end is bent down at a right angle, the two ends turned opposite ways. One end is the smaller blade of the pair, the other the larger. The drawing beside it shows the profile of the blades from the side.
Four blade pairs
The figures give both ends of the bar. The 20 x 7 / 38 x 10 mm pair is the narrowest, for a short incision near the eye or the nose. The 20 x 12 / 38 x 16 and 30 x 12 / 35 x 16 mm pairs are the middle sizes, and the 35 x 12 / 45 x 16 mm pair holds the widest flap. Each is 16 dollars.
The set of four
The set of four Tessier soft tissue retractors is 60 dollars and gives a tray every pair at once, four dollars less than buying them one at a time. For a craniofacial list that moves from the orbit to the jaw in one case, that is the way to order.
Fifteen and a half centimeters
At 15.5 cm these Tessier soft tissue retractors are long enough to hold from outside the wound and short enough to keep close to the face. Our 15 cm Tessier is one size, and our 16 cm comes in three larger pairs.
Which blade pair to order
The five variations on the listing, read on 3 November 2026. All four single pairs cost the same.
| Variation | Small end | Large end | Price |
|---|---|---|---|
| 20 x 7 / 38 x 10 mm | 20 x 7 mm | 38 x 10 mm | 16 dollars |
| 20 x 12 / 38 x 16 mm | 20 x 12 mm | 38 x 16 mm | 16 dollars |
| 30 x 12 / 35 x 16 mm | 30 x 12 mm | 35 x 16 mm | 16 dollars |
| 35 x 12 / 45 x 16 mm | 35 x 12 mm | 45 x 16 mm | 16 dollars |
| Set of 4 | All four pairs | All four pairs | 60 dollars |
Where it is used
Gemini, read on 3 November 2026, places the 15.5 cm Tessier in craniofacial, facial plastic and reconstructive surgery, on the skin flaps of the midface, the edges of the periosteum and the tissue under the skin.
| Case | What it holds | Pair to start with |
|---|---|---|
| Work at the orbital rim or the nose | A short skin flap | 20 x 7 / 38 x 10 mm |
| Midface reconstruction | Skin and periosteum over the cheekbone | 30 x 12 / 35 x 16 mm |
| Facial fracture repair | Soft tissue over the fracture | By the length of the incision |
| A wide flap along the jaw | The flap off the bone | 35 x 12 / 45 x 16 mm |
What it holds back, and what it must not do
It holds soft tissue off the bone. It is not a bone lever, and it does not bend to shape.
| Job | Use the Tessier 15.5 cm? | What to use instead or beside it |
|---|---|---|
| Holding a skin or periosteal flap in the face | Yes | This is the job it is made for |
| A single blade pair at a set price | Beside it | The 15 cm Tessier, one size |
| Shaping a blade to the orbit | No | The Tessier orbital retractor, malleable |
| A gentle hold on a thin skin edge | No | A saddle hooklet |
| Levering bone | Never | An elevator; the blade bends under that load |
How it compares with the rest of the family
Eleven Tessier, Hargis, Dingman and Seldin instruments make up this family on our site. The working ends are read off each listing’s own photograph, the options off the variations, the lengths off the name and the prices off the order form, on 3 November 2026.
| Retractor | Working end, from our photograph | Options on the listing | Length | Price |
|---|---|---|---|---|
| Tessier 12.5 cm black chromed | S shaped black band, a curved end at each side | one size | 12.5 cm | 18 dollars |
| Tessier 12 cm black | S shaped black band, a curved end at each side | five tip widths, 7 to 12 mm | 12 cm | 18 dollars |
| Tessier 15 cm | flat bar with a right angled blade at each end | one size | 15 cm | 18 dollars |
| Tessier 15.5 cm (this page) | flat bar with a right angled blade at each end | four blade pairs, or the set of four | 15.5 cm | 16 dollars, set 60 |
| Tessier 16 cm | flat bar with a right angled blade at each end | three blade pairs, or the set of three | 16 cm | 16 dollars, set 48 |
| Tessier orbital, malleable | flat strip with rounded ends, bent by hand | 10 to 12, 15 to 17 or 20 to 22 mm, or the set | not given on the listing | 11 to 32 dollars, set 56 |
| Tessier saddle, black | saddle shaped tip on a black round handle | 10, 17.5 or 20 mm | not given on the listing | 14 dollars |
| Saddle hooklets | saddle shaped tip on a ridged flat handle | 10 or 12 mm | not given on the listing | 14 dollars |
| Hargis 18 cm | deep curved blade with a turned tip, open handle | one size | 18 cm | 28 dollars |
| Dingman bone hook 19 cm | sharp hook on a slim shaft, open handle | Fig 1 or Fig 2 hook | 19 cm | 24 dollars |
| Seldin 19 cm | flat, gently curved blade on a flat handle | one size | 19 cm | 25 dollars |
Materials and finish
Every Tessier soft tissue retractor we make is formed from high quality medical grade stainless steel. The steel itself is made to a German specification. We do not publish a grade number.
The finish is plain steel. The bar and both blades are one piece. The blade pair is part of the variation you order, so mark each bar on the tray if you keep several.
Caring for it
Rinse Tessier soft tissue retractors as soon as the case ends, before blood dries in the bend of either blade. Brush both faces of each blade and the inside of each bend. Dry it, steam sterilize it on the normal instrument cycle, and sight along the bar before it goes back on the tray. A blade that has been bent off its right angle will not hold a flap, so set it aside rather than bend it back by hand.
Ordering and wholesale
The Tessier soft tissue retractor is made by Adas Instruments in our own workshop and sold direct, which is why the price sits where it does against the catalog houses. Order one for a single tray, or in quantity for a hospital list or a distributor line. We do OEM work under your own brand and your own item numbers. Send us a sample and we will hold a run to your pattern rather than ours. Stock items ship from our own workshop. Backorder items take 10 to 12 working days to make. Every instrument carries a three year replacement warranty against manufacturing defects. Production is controlled under an ISO 13485 quality management system.
Frequently asked questions
What is a Tessier retractor used for?
The double ended Tessier soft tissue retractor holds back skin, muscle and periosteum so the surgeon can see the facial bones, in craniofacial, maxillofacial and plastic surgery. AI Mode names head and neck reconstruction. The other Tessier on page one, the malleable orbital retractor, is bent to shape for the orbit.
Which Tessier blade pair do I need?
The 20 x 7 / 38 x 10 mm pair suits a short incision near the eye or the nose. The 20 x 12 / 38 x 16 and 30 x 12 / 35 x 16 mm pairs cover the midface, and the 35 x 12 / 45 x 16 mm pair a wide flap. The set of four is 60 dollars.
What do the two figures in each Tessier size mean?
Each figure is one end of the bar. In 30 x 12 / 35 x 16 mm, one end carries a 30 x 12 mm blade and the other a 35 x 16 mm blade. Our photograph shows the two ends turned opposite ways, so the bar is turned over to change size.
How is the 15.5 cm different from the 16 cm Tessier?
The 16 cm comes in three larger blade pairs, up to 50 x 12 / 70 x 16 mm, and a set of three at 48 dollars. The 15.5 cm has four pairs, including the narrow 20 x 7 / 38 x 10 mm, and a set of four at 60 dollars.
Can it be autoclaved?
Yes. It is one piece of stainless steel with no joint, screw or coating, and it goes through the normal steam cycle with the rest of the tray. Rinse it, brush inside both bends, and dry it before it is packed.
Related products and categories
Three more instruments from the same family: the Tessier soft tissue retractor, 16 cm, the Tessier orbital retractor, malleable and the Tessier saddle retractor, black. The rest of the range is under maxillofacial instruments, which sits inside our ENT instruments.


Reviews
There are no reviews yet.