What a double ended Tessier retractor is
The Tessier soft tissue retractor 16cm is the longest of our double ended Tessier retractors and the one with the largest blades. Its biggest pair, 50 x 12 mm at one end and 70 x 16 mm at the other, is made for the deep layers of the face. That means the tissue over the cheekbone, the masseter and the temporal muscle, where a short blade does not reach the bone.
Google AI Mode, read on 3 November 2026, calls the 16 cm Tessier a highly specialized, double ended instrument for craniofacial, plastic and maxillofacial reconstructive surgery, for holding back skin flaps and periosteal layers. It lists 30 x 12 / 35 x 16 mm and 50 x 12 / 70 x 16 mm as blade pairs for this length, two of the three on our listing.
Gemini, read the same day, gives three catalog names for it: the double ended Tessier retractor, the Tessier large soft tissue retractor and the Tessier double ended soft tissue retractor. It sets the pattern against a retractor with sharp prongs. The Tessier carries two solid blades of unequal size, one at each end, for a shallow and a deep layer in turn.
Key design features
Three pairs, three depths
The 30 x 12 / 35 x 16 mm pair is the shortest and suits the front of the face. The 35 x 12 / 45 x 16 mm pair reaches a little deeper. The 50 x 12 / 70 x 16 mm pair is the longest blade in the Tessier range on our site, for the deep tissue over the cheekbone and the jaw. Each is 16 dollars.
The set of three
The set of three is 48 dollars, the same as three bought one at a time, and it puts all three depths on the tray together. The drawing in our photograph shows the three pairs side by side so they can be told apart.
A blade at each end
In our photograph the bar is flat and each end is bent down at a right angle, the ends turned opposite ways. The assistant holds the flat middle and turns the bar over to change from the small blade to the large one.
Sixteen centimeters
At 16 cm it is the longest of our three double ended Tessier lengths. The extra reach keeps the assistant’s fingers out of a deep wound while the large blade sits on the bone. The 15.5 cm carries four smaller pairs, and the 15 cm one pair at a single price.
Which blade pair to order
The four variations on the listing, read on 3 November 2026. All three single pairs cost the same.
| Variation | Small end | Large end | Price |
|---|---|---|---|
| 30 x 12 / 35 x 16 mm | 30 x 12 mm | 35 x 16 mm | 16 dollars |
| 35 x 12 / 45 x 16 mm | 35 x 12 mm | 45 x 16 mm | 16 dollars |
| 50 x 12 / 70 x 16 mm | 50 x 12 mm | 70 x 16 mm | 16 dollars |
| Set of 3 | All three pairs | All three pairs | 48 dollars |
Where it is used
Gemini, read on 3 November 2026, places the 16 cm Tessier in craniofacial, oral and maxillofacial and orthognathic surgery. It names the subperiosteal flaps of the face, the layers of the masseter, the temporal muscle and the deep tissue of the cheek.
| Case | What it holds | Pair to start with |
|---|---|---|
| Craniofacial reconstruction | Subperiosteal flaps over the facial bones | 35 x 12 / 45 x 16 mm |
| Surgery on the cheekbone | Deep tissue over the zygoma | 50 x 12 / 70 x 16 mm |
| Orthognathic surgery | The masseter layers over the jaw | 50 x 12 / 70 x 16 mm |
| Work at the front of the face | A shorter skin flap | 30 x 12 / 35 x 16 mm |
What it holds back, and what it must not do
It holds soft tissue off the bone. It is not a bone lever, it does not bend to shape, and its blades have no prongs.
| Job | Use the Tessier 16 cm? | What to use instead or beside it |
|---|---|---|
| Holding a deep flap off the facial bones | Yes | This is the job it is made for |
| A narrow blade near the eye or the nose | Beside it | The 15.5 cm Tessier, 20 x 7 / 38 x 10 mm |
| Shaping a blade to the orbit | No | The Tessier orbital retractor, malleable |
| Hooking under the lower border of the jaw | No | The Hargis mandibular body retractor |
| Levering bone | Never | An elevator; the blade bends under that load |
How it compares with the rest of the family
Eleven Tessier, Hargis, Dingman and Seldin instruments make up this family on our site. The working ends are read off each listing’s own photograph, the options off the variations, the lengths off the name and the prices off the order form, on 3 November 2026.
| Retractor | Working end, from our photograph | Options on the listing | Length | Price |
|---|---|---|---|---|
| Tessier 12.5 cm black chromed | S shaped black band, a curved end at each side | one size | 12.5 cm | 18 dollars |
| Tessier 12 cm black | S shaped black band, a curved end at each side | five tip widths, 7 to 12 mm | 12 cm | 18 dollars |
| Tessier 15 cm | flat bar with a right angled blade at each end | one size | 15 cm | 18 dollars |
| Tessier 15.5 cm | flat bar with a right angled blade at each end | four blade pairs, or the set of four | 15.5 cm | 16 dollars, set 60 |
| Tessier 16 cm (this page) | flat bar with a right angled blade at each end | three blade pairs, or the set of three | 16 cm | 16 dollars, set 48 |
| Tessier orbital, malleable | flat strip with rounded ends, bent by hand | 10 to 12, 15 to 17 or 20 to 22 mm, or the set | not given on the listing | 11 to 32 dollars, set 56 |
| Tessier saddle, black | saddle shaped tip on a black round handle | 10, 17.5 or 20 mm | not given on the listing | 14 dollars |
| Saddle hooklets | saddle shaped tip on a ridged flat handle | 10 or 12 mm | not given on the listing | 14 dollars |
| Hargis 18 cm | deep curved blade with a turned tip, open handle | one size | 18 cm | 28 dollars |
| Dingman bone hook 19 cm | sharp hook on a slim shaft, open handle | Fig 1 or Fig 2 hook | 19 cm | 24 dollars |
| Seldin 19 cm | flat, gently curved blade on a flat handle | one size | 19 cm | 25 dollars |
Materials and finish
Every Tessier soft tissue retractor we make is formed from high quality medical grade stainless steel. The steel itself is made to a German specification. We do not publish a grade number.
The finish is plain steel. The bar and both blades are one piece. The blade pair is part of the variation you order, so mark each bar on the tray if you keep the set.
Caring for it
Rinse it as soon as the case ends, before blood dries in the bend of either blade. Brush both faces of each blade and the inside of each bend. Dry it, steam sterilize it on the normal instrument cycle, and sight along the bar before it goes back on the tray. A blade that has been bent off its right angle will not hold a flap, so set it aside rather than bend it back by hand.
Ordering and wholesale
The Tessier soft tissue retractor is made by Adas Instruments in our own workshop and sold direct, which is why the price sits where it does against the catalog houses. Order one for a single tray, or in quantity for a hospital list or a distributor line. We do OEM work under your own brand and your own item numbers. Send us a sample and we will hold a run to your pattern rather than ours. Stock items ship from our own workshop. Backorder items take 10 to 12 working days to make. Every instrument carries a three year replacement warranty against manufacturing defects. Production is controlled under an ISO 13485 quality management system.
Frequently asked questions
What is a double ended Tessier retractor used for?
The tessier soft tissue retractor 16cm holds skin flaps and periosteal layers back from the bone in craniofacial, plastic and maxillofacial reconstructive surgery. Its two blades let one bar hold a shallow layer and then a deeper one, turned over between them.
Which Tessier 16 cm blade pair do I need?
The 30 x 12 / 35 x 16 mm pair suits the front of the face, and the 35 x 12 / 45 x 16 mm pair a deeper flap. The 50 x 12 / 70 x 16 mm pair holds the deep tissue over the cheekbone and the jaw. The set of three is 48 dollars.
Is the 16 cm the large Tessier soft tissue retractor?
Yes. Gemini gives the Tessier large soft tissue retractor as a catalog name for the 16 cm, and our 50 x 12 / 70 x 16 mm pair is the longest blade in the Tessier range on our site.
How is it different from a pronged retractor?
Gemini sets the double ended Tessier against a retractor with sharp or blunt prongs at one end. The Tessier carries two solid blades of unequal size, which hold a broad flap evenly rather than hooking it at points.
Can it be autoclaved?
Yes. It is one piece of stainless steel with no joint, screw or coating, and it goes through the normal steam cycle with the rest of the tray. Rinse it, brush inside both bends, and dry it before it is packed.
Related products and categories
Three more instruments from the same family: the Tessier orbital retractor, malleable, the Tessier saddle retractor, black and the saddle hooklets. The rest of the range is under maxillofacial instruments, which sits inside our ENT instruments.


Reviews
There are no reviews yet.