What the Luniatschek gauze packer is
The Luniatschek gauze packer is a slim rod with a notch at each end. The notch sits on a strip of gauze and pushes it, fold by fold, down into a cavity too deep and too narrow for the fingers: the bed a tonsil leaves behind, a socket, the back of the nose. The packing goes where the tip puts it and stays there, pressing on the bleeding surface, while the next fold is fed in behind it.
Google AI Mode, read on 5 November 2026, gives the tampon plugger, or stopper, as another name and describes a medical instrument used in ENT surgery to pack gauze or hemostatic material into deep surgical cavities, above all the tonsillar fossa after tonsillectomy. In its words, the tips are V shaped or forked, made to grip and place the packing against bleeding or raw surfaces without puncturing the soft tissue round them. It describes single and double ended patterns with rounded, blunt tips.
Gemini, read the same day, places it in ENT, oral and maxillofacial surgery and dental surgery, on nasal packing gauze, dressings in a socket after an extraction, ribbon gauze and the cavities of the mouth. It lists the Luniatschek packing instrument and the Luniatschek gauze director as catalog names, and sets it apart from dressing forceps: the packer pushes and packs, the forceps pinch.
As a gauze packer instrument, it is used with ribbon gauze or a hemostatic strip held in forceps in the other hand. The notch takes the edge of the strip and presses it down; the forceps feed the next length; the notch presses again. The cavity fills from the bottom up and the packing is firm against the walls.
Key design features
A V notched tip
The drawings on our photograph show each tip ending in a small V shaped notch. The notch sits astride the gauze and holds it, so the strip goes down with the tip rather than sliding off to one side. A plain point would slip, and a sharp one would go through the gauze into the tissue. AI Mode describes the same V shaped, forked tip.
Double ended, one end curved
One tip is straight and the other is curved, as the drawings show. The straight end reaches down into a cavity in line with the hand; the curved end reaches round a corner, behind a pillar or up into the back of the nose. The packer is turned end for end rather than swapped for another.
A knurled handle
The round handle in our photograph is knurled along its length. Wet gloved fingers hold it without slipping, and the packer can be rolled between them to turn the curved tip toward the wall it has to reach. Packing takes firm, small pushes, and a smooth handle would let the fingers slide down toward the wound.
Slim and light
The Luniatschek is a slim instrument, so it goes down past a mouth gag and a tongue depressor without blocking the view. As the gauze packer on a tonsil tray, it is used last, after the tonsil is out and the bleeding points are found, and it is light enough to work with for the length of a packing.
What the listing gives you
One pattern at one price, read off the listing on 5 November 2026. What it tells you is set out below, and where each detail was read from.
| What you get | Detail | Read from |
|---|---|---|
| Tips | V notched, one at each end | The drawings on our photograph |
| Ends | One straight, one curved | The drawings on our photograph |
| Handle | Round and knurled | Our photograph |
| Options | One size | The listing |
| Price | 24 dollars | The order form |
Where it is used
AI Mode and Gemini, read on 5 November 2026, name these cases for the Luniatschek gauze packer. The reasons in the last column are ours, read off the tips and the handle.
| Case | What it packs | Why this one |
|---|---|---|
| Tonsillectomy | Gauze into the tonsillar fossa | The notch holds the strip as it goes down |
| Nasal packing | Ribbon gauze into the nose | The curved end reaches round |
| Tooth extraction | A dressing into the socket | Named by Gemini |
| Oral surgery | Gauze into a cavity in the mouth | Slim enough to pass a gag |
What it does, and what it must not do
The Luniatschek gauze packer pushes gauze into place. It does not pick gauze up and it does not pull it out: that is forceps work. Press with the notch on the gauze, never on bare tissue.
| Job | Use the Luniatschek? | What to use instead or beside it |
|---|---|---|
| Packing gauze into the tonsil bed | Yes | This is the job it is made for |
| Feeding the next length of gauze | Beside it | Dressing forceps in the other hand |
| Holding the mouth open while packing | Beside it | The Roser Koenig or the Denhardt mouth gag |
| Removing the packing | No | Dressing forceps |
| Probing a wound | Never | A probe |
How it compares with the rest of the oral access tray
Ten oral access instruments make up this family on our site. The working ends and handles are read off each listing’s own photograph, the options off the variations and the prices off the order form, on 5 November 2026.
| Instrument | Working end, from our photograph | Handle or frame, from our photograph | Size or options | Price |
|---|---|---|---|---|
| Bruenings depressor | flat blade at each end, four windows in each | flat strip, angled at the middle | one size | 5 dollars |
| Doyen depressor | broad plain blade, flared at each end | none, the blade is bent through its middle | 16 cm or 13.5 cm | 7 dollars |
| Hartmann depressor | angled blade with a ribbed face | open loop handle | one size | 12 dollars |
| Tobold depressor | angled blade with a ribbed face | solid flat handle | 15 cm or 14.5 cm | 17 dollars |
| Wieder depressor | angled ribbed blade with three windows | slotted handle ending in a hook | four blade sizes | 17 dollars |
| Denhardt gag | two tooth plates | crossing arms with a ratchet and a release lever | one size | 36 dollars |
| Dingman gag set | frame with cheek arms and a tongue blade holder | three tongue blades in the set | complete set | 150 dollars |
| Heister gag | two straight jaws, cross cut at the tips | a screw turned by a broad thumb disc | one size | 45 dollars |
| Roser-Koenig gag | serrated jaw tips | scissor action handles with a ratchet | 19 cm or 16 cm | 30 dollars |
| Luniatschek packer (this page) | a fine V notched tip at each end, one curved | knurled round handle | one size | 24 dollars |
Materials and finish
Every Luniatschek gauze packer we make is formed from high quality medical grade stainless steel. The steel itself is made to a German specification. We do not publish a grade number.
The Luniatschek gauze packer has a plain steel finish. Look at both notches before each case. A notch bent or closed up will not hold the gauze, and a tip bent off line will not reach where it is aimed, so that packer should be set aside.
Caring for it
Rinse the Luniatschek gauze packer as soon as the case ends, before blood dries in the notches and the knurling. Brush both tips and along the handle, wash it, dry it, and steam sterilize it on the normal cycle with the rest of the tray. Store it so the tips do not knock against heavier instruments.
Ordering and wholesale
The Luniatschek gauze packer is made by Adas Instruments in our own workshop and sold direct, which is why the price sits where it does against the catalog houses. Order one for a single tray, or in quantity for a hospital list or a distributor line. We do OEM work under your own brand and your own item numbers. Send us a sample and we will hold a run to your pattern rather than ours. Stock items ship from our own workshop. Backorder items take 10 to 12 working days to make. Every instrument carries a three year replacement warranty against manufacturing defects. Production is controlled under an ISO 13485 quality management system.
Frequently asked questions
What is the Luniatschek gauze packer used for?
It packs gauze or hemostatic material into deep surgical cavities, above all the tonsillar fossa after tonsillectomy, in AI Mode’s words. Gemini adds nasal packing and dressings in a tooth socket. Ours is double ended, at 24 dollars.
Is a tampon plugger the same instrument?
Yes. AI Mode gives the tampon plugger, or stopper, as another name for the Luniatschek gauze packer, and Gemini lists the Luniatschek packing instrument. All of these describe a slim rod with a notched tip that pushes packing into place.
Why does the Luniatschek tip have a V notch?
The notch sits astride the gauze and holds it, so the strip goes down with the tip instead of sliding off. A plain point would slip, and a sharp one would go through the gauze into the tissue below it.
Why is one end of the Luniatschek curved?
So the packer can reach round a corner: behind a tonsil pillar, or up into the back of the nose. The straight end reaches down in line with the hand. The packer is turned end for end rather than swapped for another instrument.
Can it be autoclaved?
Yes. It is stainless steel with no coating, and it goes through the normal steam cycle with the rest of the tray. Brush both notches and the knurled handle first, because dried blood in the knurling is easy to miss.
Related products and categories
Three more instruments from the same oral access tray: the Bruenings tongue depressor, the Doyen tongue depressor and the Hartmann tongue depressor. The rest of the range is under maxillofacial instruments, which sits inside our ENT instruments.


Reviews
There are no reviews yet.