What the Obwegeser maxilla mobilizer is
The Obwegeser maxilla mobilizer is the lever that frees the upper jaw. In a Le Fort I osteotomy, the maxilla is cut free from the skull above the roots of the teeth so it can be moved to a new position. The cuts at the front and sides are made with saws and osteotomes, but at the back the maxilla is still held where it meets the pterygoid plates. The mobilizer’s curved end goes round behind the maxilla there, and a steady pull brings it down and free.
Google AI Mode, read on 5 November 2026, gives the Obwegeser maxillary mobilizer, or maxilla mobilizing instrument, as other names and describes a surgical instrument used in oral and maxillofacial, plastic and ENT surgery. In its words, its role is to detach, separate and down fracture the maxilla from its junctions with other bones, such as the pterygoid plates, in midface procedures like the Le Fort I osteotomy. It describes a heavy, strongly curved blade that reaches round the back of the maxilla and a solid handle that takes heavy leverage, and gives 23 cm overall with a 12 mm working end, which is the size ours is made in.
Gemini, read the same day, places it in oral and maxillofacial, orthognathic and facial trauma surgery, on the maxilla, the palate and the junction of the maxilla with the pterygoid plates. It lists the obwegeser maxilla mobilizer 23cm and the Obwegeser maxillary lever as catalog names, and sets it apart from disimpaction forceps, which clamp the jaw with two arms, where the mobilizer levers it down from behind.
As a maxillary mobilizer it answers one question of the osteotomy tray, which instruments are used once the bone is cut. Saws, burs and osteotomes make the cut; separators, levers and the mobilizer move the bone. This one moves the upper jaw, and it is used last, once the front and side cuts are complete and the surgeon has checked that nothing is left holding the maxilla but the bone behind it.
Key design features
A curved working end
Our photograph shows the end of the bar bent round into a curve, and the drawing beside it marks the end 12 mm wide. The curve hooks behind the maxilla where the front cuts cannot reach, so the pull comes from behind and brings the jaw down and forward in one movement.
A straight flat bar
The handle is a straight, flat bar in our photograph, with no joint and no moving part. A flat bar takes a hard, steady pull without flexing and tells the hand exactly where the curved end is facing. AI Mode describes a solid handle made to take leverage without slipping.
Twenty three centimeters
At 23 cm the mobilizer reaches from the front of the mouth to the back of the maxilla with the hand still outside the lips. AI Mode gives 23 cm as the standard length for this pattern, which is the length ours is made in. A shorter bar would bring the hand into the mouth, where it blocks the light and the suction just when the surgeon needs to see the back of the jaw.
One piece
The mobilizer is one piece of steel, end and handle together, so there is nothing to work loose under the force of a down fracture. As a maxilla mobilizing instrument it is simple: a curve to hook behind the bone and a bar to pull it by.
What the listing gives you
One pattern at one price, read off the listing on 5 November 2026. What it tells you is set out below, and where each detail was read from.
| What you get | Detail | Read from |
|---|---|---|
| Working end | Bent into a curve, 12 mm wide | Our photograph and its drawing |
| Handle | Straight flat bar | Our photograph |
| Length | 23 cm | The product name |
| Options | One size | The listing |
| Price | 24 dollars | The order form |
Where it is used
AI Mode and Gemini, read on 5 November 2026, name these cases for the Obwegeser maxilla mobilizer. The reasons in the last column are ours, read off the curved end and the bar.
| Case | What it frees | Why this one |
|---|---|---|
| Le Fort I osteotomy | The maxilla, down and forward | The curve hooks behind it |
| Orthognathic surgery | The upper jaw, for a new position | Named by Gemini |
| Facial trauma | A displaced maxilla | Named by Gemini |
| Midface procedures | The maxilla at the pterygoid plates | Named by AI Mode |
What it does, and what it must not do
The Obwegeser maxilla mobilizer levers and down fractures a maxilla that has already been cut. It does not cut bone. Pull steadily and evenly, so the maxilla comes free along the cuts rather than breaking somewhere else.
| Job | Use the Obwegeser mobilizer? | What to use instead or beside it |
|---|---|---|
| Freeing the maxilla from behind after the cuts | Yes | This is the job it is made for |
| A short lever behind the maxillary tuberosity | Beside it | The Tessier retromaxillary lever |
| Making the bone cut | No | A saw, a bur or an osteotome |
| Splitting the lower jaw | No | The Smith ramus separator |
| Levering teeth | Never | An elevator |
How it compares with the rest of the orthognathic tray
Five orthognathic instruments make up this family on our site. The working ends and handles are read off each listing’s own photograph, the options off the variations and the prices off the order form, on 5 November 2026.
| Instrument | Working end, from our photograph | Handle, from our photograph | Size or options | Price |
|---|---|---|---|---|
| Smith ramus separator | two long flat narrow blades | long handles with a spring between them | with or without a ratchet | 55 dollars |
| Smith sagittal split separator | small flat angled blade on a curved shank | hollow fluted handle | right or left | 34 dollars |
| Obwegeser mobilizer (this page) | flat end bent into a curve | straight flat bar | 23 cm | 24 dollars |
| Tessier lever | short upright end, cross serrated, on a right angled shank | large hollow handle | 15 cm, right, left or a set of 2 | 32 or 60 dollars |
| Lindemann bur | spiral fluted cutting head tapering to a point | long smooth shank for the handpiece | 35, 22 or 10 mm | 12 dollars |
Materials and finish
Every Obwegeser maxilla mobilizer we make is formed from high quality medical grade stainless steel. The steel itself is made to a German specification. We do not publish a grade number.
The Obwegeser maxilla mobilizer has a plain steel finish. Sight along it before each case. A bar bent by a hard pull or a curve opened out of shape will not sit behind the maxilla the way it should, and that mobilizer should be set aside.
Caring for it
Rinse the Obwegeser maxilla mobilizer as soon as the case ends, before blood and bone dust dry on the curved end. Brush it, wash it, dry it, and steam sterilize it on the normal cycle with the rest of the tray. Store it flat so the curve is not knocked.
Ordering and wholesale
The Obwegeser maxilla mobilizer is made by Adas Instruments in our own workshop and sold direct, which is why the price sits where it does against the catalog houses. Order one for a single tray, or in quantity for a hospital list or a distributor line. We do OEM work under your own brand and your own item numbers. Send us a sample and we will hold a run to your pattern rather than ours. Stock items ship from our own workshop. Backorder items take 10 to 12 working days to make. Every instrument carries a three year replacement warranty against manufacturing defects. Production is controlled under an ISO 13485 quality management system.
Frequently asked questions
What is the Obwegeser maxilla mobilizer used for?
It detaches, separates and down fractures the maxilla from the bones it joins, such as the pterygoid plates, in Le Fort I and other midface operations, in AI Mode’s words. Ours is 23 cm with a curved 12 mm end, at 24 dollars.
What instruments are used in osteotomy surgery?
Saws, burs and osteotomes make the bone cuts. Separators, levers and mobilizers then move the cut bone: the Smith separators for the lower jaw, and the Obwegeser mobilizer and the Tessier lever for the upper jaw.
Is an Obwegeser maxillary mobilizer the same instrument?
Yes. AI Mode gives the Obwegeser maxillary mobilizer and the maxilla mobilizing instrument as other names for it, and Gemini lists the Obwegeser maxillary lever. All of them describe the same curved lever, used from behind the upper jaw once the cuts are made.
How is the Obwegeser different from the Tessier retromaxillary lever?
The Obwegeser is 23 cm, a flat bar with a curved end that pulls the maxilla down from behind. The Tessier is 15 cm, a short upright end on a right angled shank, in right and left patterns.
Can it be autoclaved?
Yes. It is stainless steel with no coating and no moving parts, and it goes through the normal steam cycle with the rest of the tray. Brush the curved end first, dry it fully, and store it flat so the curve keeps its shape.
Related products and categories
Three more instruments from the same orthognathic tray: the Tessier retromaxillary lever, 15 cm, the Lindemann bur and the Smith ramus separator. The rest of the range is under maxillofacial instruments, which sits inside our ENT instruments.



Reviews
There are no reviews yet.