What the Smith ramus separator is
The Smith ramus separator is the spreader of the sagittal split. When the lower jaw is moved forward or back, the bone of each ramus is cut so that it can be split into an outer and an inner half. The cuts are made with saws and osteotomes; the separator is what opens them. Its two flat blades go into the cut together and are driven apart, and the two halves of the ramus come away from each other in a controlled way, a little at a time.
Google AI Mode, read on 5 November 2026, describes the Smith ramus separator as a stainless steel instrument used in oral and maxillofacial surgery, in bilateral sagittal split osteotomy. In its words, it gives the leverage needed for the controlled, safe separation of the mandibular ramus along the cut, while protecting the nerve and vessels that run through the jaw, such as the inferior alveolar nerve. It describes plier style handles with curved stems and a spring for smooth, controlled force, and a ratchet on some patterns that holds the tension hands free.
Gemini, read the same day, places it in oral and maxillofacial and orthognathic surgery, on the cortical bone of the ramus and the lines of the osteotomy. It lists the Smith mandibular ramus separator as a catalog name, and sets it apart from the Smith sagittal split separator: the ramus separator spreads inside the first ramus cut with force, where the sagittal split separator has a thin blade that finishes the split.
On the tray it goes by its short name, the Smith separator, and sits as a separator instrument beside the saws, the osteotomes and the Smith sagittal split separator. The order of work does not change: the cuts are made, the ramus separator opens them, the single ended separator finishes the split, and only then is the tooth bearing segment moved to its new place and fixed with plates or screws.
Key design features
Two flat blades
Our photograph shows two long, flat, narrow blades, and the drawing beside it shows their tips lying side by side. Closed, they are thin enough to slip into an osteotomy cut. Driven apart, they press on both walls of the cut at once and spread the bone evenly, rather than prising on one side the way a single lever does.
A spring between the handles
A spring sits between the long handles in our photograph and keeps them apart at rest. The hand works against it, so the spread is felt and controlled, and when the grip is eased the spring takes the handles back. AI Mode describes the same spring for smooth, controlled force.
With or without a ratchet
The listing sells the separator with a ratchet or without one, at the same price. With the ratchet, the spread is held where it was set while the surgeon checks the split and the nerve. Without it, the spread follows the hand and is let go at once. AI Mode describes the ratchet pattern as holding the tension hands free.
Long handles
The handles are long against the blades, which gives the leverage the ramus needs: cortical bone resists, and a short instrument would need a hard squeeze. A hard squeeze is a jerky one, and a jerky spread is how a split runs off its line. As a mandibular ramus separator it works at the back of the mouth, and the length keeps the hand outside it.
Which pattern to order
Two patterns at one price, read off the variations on 5 November 2026. The guide in the second column is ours.
| Pattern | Suits, our guide | Price |
|---|---|---|
| With ratchet | Holding the spread while the split and the nerve are checked | 55 dollars |
| Without ratchet | A spread that follows the hand and lets go at once | 55 dollars |
Where it is used
AI Mode and Gemini, read on 5 November 2026, name these cases for the Smith ramus separator. The reasons in the last column are ours, read off the blades, the spring and the ratchet.
| Case | What it separates | Why this one |
|---|---|---|
| Bilateral sagittal split osteotomy | The two halves of the ramus | Two blades spread both walls |
| Mandibular advancement or setback | The ramus, along the cut | Long handles give the leverage |
| Orthognathic surgery | The cortical bone at the osteotomy line | Named by Gemini |
| Protecting the nerve during the split | A controlled spread, a little at a time | Named by AI Mode |
What it does, and what it must not do
The Smith ramus separator spreads an osteotomy cut that has already been made. It does not cut bone. Spread slowly and watch the split, so the bone parts along the cut and not across it.
| Job | Use the Smith ramus separator? | What to use instead or beside it |
|---|---|---|
| Spreading the ramus along the sagittal cut | Yes | This is the job it is made for |
| Finishing the split with a thin blade | Beside it | The Smith sagittal split separator |
| Making the bone cut | No | A saw, a bur or an osteotome |
| Mobilizing the upper jaw | No | The Obwegeser maxilla mobilizer |
| Levering teeth | Never | An elevator |
How it compares with the rest of the orthognathic tray
Five orthognathic instruments make up this family on our site. The working ends and handles are read off each listing’s own photograph, the options off the variations and the prices off the order form, on 5 November 2026.
| Instrument | Working end, from our photograph | Handle, from our photograph | Size or options | Price |
|---|---|---|---|---|
| Smith ramus separator (this page) | two long flat narrow blades | long handles with a spring between them | with or without a ratchet | 55 dollars |
| Smith sagittal split separator | small flat angled blade on a curved shank | hollow fluted handle | right or left | 34 dollars |
| Obwegeser mobilizer | flat end bent into a curve | straight flat bar | 23 cm | 24 dollars |
| Tessier lever | short upright end, cross serrated, on a right angled shank | large hollow handle | 15 cm, right, left or a set of 2 | 32 or 60 dollars |
| Lindemann bur | spiral fluted cutting head tapering to a point | long smooth shank for the handpiece | 35, 22 or 10 mm | 12 dollars |
Materials and finish
Every Smith ramus separator we make is formed from high quality medical grade stainless steel. The steel itself is made to a German specification. We do not publish a grade number.
The Smith ramus separator has a plain steel finish. Before each case, check that the blades close together cleanly and that the spring returns the handles. On the ratchet pattern, run the ratchet through its travel; a catch that slips should be dealt with before use.
Caring for it
Rinse the Smith ramus separator as soon as the case ends, before blood and bone dust dry in the joint and between the blades. Brush the blades, the joint and the spring, wash it, dry it, and steam sterilize it on the normal cycle with the rest of the tray. A drop of instrument lubricant on the joint keeps the action smooth.
Ordering and wholesale
The Smith ramus separator is made by Adas Instruments in our own workshop and sold direct, which is why the price sits where it does against the catalog houses. Order one for a single tray, or in quantity for a hospital list or a distributor line. We do OEM work under your own brand and your own item numbers. Send us a sample and we will hold a run to your pattern rather than ours. Stock items ship from our own workshop. Backorder items take 10 to 12 working days to make. Every instrument carries a three year replacement warranty against manufacturing defects. Production is controlled under an ISO 13485 quality management system.
Frequently asked questions
What is the Smith ramus separator used for?
It gives the leverage for a controlled separation of the mandibular ramus along the cut in bilateral sagittal split osteotomy, in AI Mode’s words. Gemini adds orthognathic surgery. Ours has two flat blades on spring handles, at 55 dollars.
Should I order the ramus separator with or without a ratchet?
Take the ratchet pattern if the spread should hold while the split and the nerve are checked. Take the plain pattern if the spread should follow the hand and let go at once. Both are 55 dollars.
What is the difference between the two Smith separators?
The Smith ramus separator has two blades on spring handles that spread the cut with force. The Smith sagittal split separator is single ended, with one small flat blade, in right and left patterns, to finish the split.
Does the ramus separator cut bone?
No. The bone is cut first with a saw, a bur or an osteotome, and the separator then opens the cut. Its blades spread the two walls of the osteotomy so the ramus splits along the line that was cut.
Can it be autoclaved?
Yes. It is stainless steel with no coating, and it goes through the normal steam cycle with the rest of the tray. Brush the joint and the spring first, dry it fully, and lubricate the joint now and then so the spread stays smooth.
Related products and categories
Three more instruments from the same orthognathic tray: the Smith sagittal split separator, the Obwegeser maxilla mobilizer, 23 cm and the Tessier retromaxillary lever, 15 cm. The rest of the range is under maxillofacial instruments, which sits inside our ENT instruments.



Reviews
There are no reviews yet.