What the Smith sagittal split separator is
The Smith sagittal split separator finishes the split. In a sagittal split osteotomy, each side of the lower jaw is cut so that the ramus and the body of the jaw can be split into an outer half and an inner half, and the tooth bearing part moved forward or back. The cuts are made first. This separator is then worked into the cut, its small blade turned to spread the bone, and the last of the bone that still joins the two halves gives way along the line.
Google AI Mode, read on 5 November 2026, describes the Smith sagittal split separator as a specialized maxillofacial surgical instrument designed to complete the division of the upper ramus cut during a bilateral sagittal split osteotomy, or BSSO. In its words, it lets oral and maxillofacial surgeons separate the proximal and distal segments of the mandible in a controlled way after the first osteotomy cuts. It describes distinct left and right profiles, a lateral, semi sharp blade that eases into the osteotomy line and spreads cortical bone without shattering it, and a bulky hollow handle.
Gemini, read the same day, places it in oral and maxillofacial and orthognathic surgery, on the segments of the mandible, the cancellous bone between the plates and the faces of the split. It lists the Smith mandibular splitter as a catalog name, and sets it apart from the Smith ramus separator: slim, offset blades in left and right patterns that glide between the cortical plates, where the ramus separator has heavier jaws.
A sagittal ramus split osteotomy divides the ramus lengthwise so the jaw can be moved and fixed in its new place, and the sagittal split separator is the instrument for the last part of that split. The tray carries a right and a left, so both sides are finished in the same case with the same feel in the hand.
Key design features
A small flat angled blade
Our photograph and its drawing show a small flat blade set at an angle on the end of the shank. The blade goes into the osteotomy line edge first and is then turned, so its flat face presses the two walls of bone apart. AI Mode describes the same lateral blade that spreads cortical bone without shattering it.
A curved shank
The shank curves between the handle and the blade. That curve brings the blade round to the inner face of the ramus at the back of the mouth, while the handle stays out at the corner of the lips. A straight instrument would have to come in through the cheek to reach the same place. With the handle out at the lips, the light and the suction keep a clear line to the cut while the blade works.
Right and left patterns
The listing sells the separator as a right and a left, at 34 dollars each. The blade turns toward the side it is made for, so each one meets its side of the jaw the right way round. A sagittal split is done on both sides in the same case, and the tray carries both.
A hollow fluted handle
The handle in our photograph is hollow and fluted along its length. It fills the hand and gives a firm, turning grip, which is the movement the blade needs inside the cut. AI Mode describes a bulky hollow handle for the same control under pressure.
Which side to order
Two patterns at one price, read off the variations on 5 November 2026. The guide in the second column is ours.
| Pattern | Suits, our guide | Price |
|---|---|---|
| Right | The right side of the mandible | 34 dollars |
| Left | The left side of the mandible | 34 dollars |
Where it is used
AI Mode and Gemini, read on 5 November 2026, name these cases for the Smith sagittal split separator. The reasons in the last column are ours, read off the blade, the shank and the handle.
| Case | What it separates | Why this one |
|---|---|---|
| Bilateral sagittal split osteotomy | The proximal and distal segments | Right and left patterns |
| Mandibular advancement or setback | The last bone joining the two halves | The flat blade spreads, it does not cut |
| Orthognathic surgery | The cortical plates of the jaw | Named by Gemini |
| Finishing the upper ramus cut | The split along the osteotomy line | Named by AI Mode |
What it does, and what it must not do
The Smith sagittal split separator finishes a split along cuts that have already been made. It is not a cutting instrument and it is not a lever for moving the jaw. Turn it gently and watch the line, so the bone parts where it was cut.
| Job | Use the Smith sagittal split separator? | What to use instead or beside it |
|---|---|---|
| Finishing the sagittal split on one side | Yes | This is the job it is made for |
| Spreading the ramus cut with two blades | Beside it | The Smith ramus separator |
| Making the bone cut | No | A saw, a bur or an osteotome |
| Mobilizing the upper jaw | No | The Obwegeser maxilla mobilizer |
| Levering teeth | Never | An elevator |
How it compares with the rest of the orthognathic tray
Five orthognathic instruments make up this family on our site. The working ends and handles are read off each listing’s own photograph, the options off the variations and the prices off the order form, on 5 November 2026.
| Instrument | Working end, from our photograph | Handle, from our photograph | Size or options | Price |
|---|---|---|---|---|
| Smith ramus separator | two long flat narrow blades | long handles with a spring between them | with or without a ratchet | 55 dollars |
| Smith sagittal split separator (this page) | small flat angled blade on a curved shank | hollow fluted handle | right or left | 34 dollars |
| Obwegeser mobilizer | flat end bent into a curve | straight flat bar | 23 cm | 24 dollars |
| Tessier lever | short upright end, cross serrated, on a right angled shank | large hollow handle | 15 cm, right, left or a set of 2 | 32 or 60 dollars |
| Lindemann bur | spiral fluted cutting head tapering to a point | long smooth shank for the handpiece | 35, 22 or 10 mm | 12 dollars |
Materials and finish
Every Smith sagittal split separator we make is formed from high quality medical grade stainless steel. The steel itself is made to a German specification. We do not publish a grade number.
The Smith sagittal split separator has a plain steel finish. Look at the blade before each case. A blade edge chipped or bent off its angle will not seat in the cut, and that separator should be set aside. Check the pair as a pair: a right and a left that feel different in the hand make the two sides of the same case harder to match.
Caring for it
Rinse the Smith sagittal split separator as soon as the case ends, before blood and bone dust dry on the blade and in the flutes of the handle. Brush them, wash it, dry it, and steam sterilize it on the normal cycle. Keep the right and the left together in the tray.
Ordering and wholesale
The Smith sagittal split separator is made by Adas Instruments in our own workshop and sold direct, which is why the price sits where it does against the catalog houses. Order one for a single tray, or in quantity for a hospital list or a distributor line. We do OEM work under your own brand and your own item numbers. Send us a sample and we will hold a run to your pattern rather than ours. Stock items ship from our own workshop. Backorder items take 10 to 12 working days to make. Every instrument carries a three year replacement warranty against manufacturing defects. Production is controlled under an ISO 13485 quality management system.
Frequently asked questions
What is the Smith sagittal split separator used for?
It completes the split of the mandible in a bilateral sagittal split osteotomy, after the first cuts, separating the two segments of the jaw in a controlled way, in AI Mode’s words. Ours is right or left, at 34 dollars.
What is a sagittal ramus split osteotomy?
It is a jaw operation in which each side of the lower jaw is divided lengthwise, so the tooth bearing part can be moved forward or back and fixed in its new place. The split is finished with a sagittal split separator.
Do I need a right and a left Smith sagittal split separator?
Yes, for a bilateral split. Each blade turns toward the side it is made for, so the right meets the right side of the jaw and the left the left. The listing sells each at 34 dollars.
How does the sagittal split separator differ from the Smith ramus separator?
The ramus separator has two blades on spring handles that spread the cut with force. The sagittal split separator is single ended, with one small flat blade on a curved shank, made to finish the split on one side.
Can it be autoclaved?
Yes. It is stainless steel with no coating, and it goes through the normal steam cycle with the rest of the tray. Brush the flutes of the hollow handle first, because blood dries in the grooves where it is easy to miss.
Related products and categories
Three more instruments from the same orthognathic tray: the Obwegeser maxilla mobilizer, 23 cm, the Tessier retromaxillary lever, 15 cm and the Lindemann bur. The rest of the range is under maxillofacial instruments, which sits inside our ENT instruments.



Reviews
There are no reviews yet.