What an Obwegeser nasal spine retractor is
The anterior nasal spine is a small point of bone at the front of the upper jaw, right under the base of the nose. In a Le Fort I osteotomy the cut runs just below it. A blade placed there has to hold the lip and the nose up and stay on a point of bone, and a flat blade would slide off it. The forked tip straddles it instead.
Google AI Mode, read on 3 November 2026, describes the Obwegeser nasal spine retractor as a hand held instrument for oral and maxillofacial, plastic and ENT surgery. Its main purpose, the answer says, is to pull back the soft tissue and expose the anterior nasal spine in upper jaw procedures such as Le Fort osteotomies. It describes a V notched saddle blade that fits over the bony spine so it does not slip, and that keeps the upper lip, the columella and the septum clear of the saw.
Gemini gives the Obwegeser anterior nasal spine retractor and the Obwegeser premaxillary retractor as other catalog names, and a buyer may ask simply for a nasal spine retractor or an obwegeser nasal retractor. The 22 cm version, with a narrow tip, is on its own listing.
Key design features
A forked tip
In our photograph the tip of the blade is forked. The two points sit on either side of the nasal spine, so the blade holds its place on the bone while the assistant pulls the tissue upward. That is the saddle the AI Mode answer describes.
A blade at a right angle
The blade is turned at a right angle to the shaft. The shaft runs up along the upper lip and the blade drops onto the spine, so the pull lifts the lip and the base of the nose straight up and away from the line of the cut.
Twenty four centimeters
At 24 cm it is the longer of our two nasal spine retractors. Gemini gives the longer version more reach and leverage in deep tissue, and the extra length keeps the hand further from the saw and the surgeon’s line of sight.
A ring and a loop
A ring sits on the shaft above an open loop handle. The loop takes the whole hand for a steady upward pull through the cut, and a finger through the ring gives a lighter hold while the fork is placed.
Which one to order
The listing carries one size, read on 3 November 2026. The 22 cm version is on its own listing at the same price.
| What you get | Length | Working end | Price |
|---|---|---|---|
| Obwegeser nasal spine retractor, 24 cm | 24 cm | Right angled blade, forked tip | 24 dollars |
| Obwegeser nasal spine retractor, 22 cm | 22 cm | Narrow right angled blade | 24 dollars |
Where it is used
Gemini, read on 3 November 2026, places the 24 cm in oral and maxillofacial and orthognathic surgery, on the premaxilla, the anterior nasal spine and the soft tissue of the upper lip.
| Case | What it holds | Why the forked tip |
|---|---|---|
| Le Fort I osteotomy | Upper lip and base of the nose | It sits over the spine and does not slide |
| Moving the upper jaw forward | Tissue at the front of the maxilla | A steady hold while the jaw is moved |
| Septal work through the mouth | Soft tissue at the base of the septum | Holds clear of the septum |
| Reconstruction at the nasal spine | Lip and nose | Long reach, hand out of the way |
What it holds back, and what it must not do
It holds tissue at the nasal spine. It does not hold the cheek, and it is not a lever.
| Job | Use the 24 cm nasal spine retractor? | What to use instead or beside it |
|---|---|---|
| Holding lip and nose above a Le Fort cut | Yes | This is the job it is made for |
| A closer hold on a smaller patient | Beside it | The 22 cm nasal spine retractor |
| Holding the cheek over the maxilla | No | An Obwegeser soft tissue retractor |
| Work inside the nose | No | A nasal speculum |
| Levering bone | Never | An elevator |
How it compares with the rest of the family
Ten Obwegeser and Munro jaw retractors make up this family on our site. The working ends are read off each listing’s own photograph, the sizes off the variations, the lengths off the name and the prices off the order form, on 3 November 2026.
| Retractor | Working end, from our photograph | Sizes on the listing | Length | Price |
|---|---|---|---|---|
| Obwegeser third molar | right angled blade with a turned down tip, ring and loop handle | one size | 24 cm | 26 dollars |
| Obwegeser retractor 24 cm | right angled blade, bent up or bent down, ring and loop handle | seven blades, 5 x 16 to 16 x 80 mm | 24 cm | 26 dollars |
| Obwegeser soft tissue 21 cm | wider right angled blade, ring and loop handle | three blades, 11 x 40 to 16 x 80 mm | 21 cm | 26 dollars |
| Obwegeser ramus 24 cm | right angled blade with a notched tip, ring and loop handle | 11/15 x 70 or 12/22 x 70 mm | 24 cm | 26 dollars |
| Obwegeser ramus 22 cm | right angled blade with a notched tip, ring and loop handle | one size | 22 cm | 26 dollars |
| Obwegeser nasal spine 22 cm | narrow right angled blade, ring and loop handle | one size | 22 cm | 24 dollars |
| Obwegeser nasal spine 24 cm (this page) | right angled blade with a forked tip, ring and loop handle | one size | 24 cm | 24 dollars |
| Obwegeser chin | flat angled bar with a pronged tip | one size | 16 cm | 20 dollars |
| Obwegeser channel | flat bar, slim rounded end and a curved channel hook | 8 or 10 mm | 16 cm | 14 dollars |
| Munro ramus | broad curved blade on a solid hooked handle | four blades, 20 to 35 x 80 mm | 16 cm | 28 dollars |
Materials and finish
Every Obwegeser nasal spine retractor we make is formed from high quality medical grade stainless steel. The steel itself is made to a German specification. We do not publish a grade number.
The finish is plain steel. Blade, shaft, ring and handle are one piece, with no joint at the bend. The two points of the fork are the part that meets bone, so look at them before each case.
Caring for it
Rinse it as soon as the case ends, while bone dust is still wet between the points of the fork. Brush the fork from both sides, both faces of the blade and the inside of the loop handle. Dry it, steam sterilize it on the normal instrument cycle, and look at the fork before it goes back on the tray. Set aside one with a bent point rather than bend it back by hand.
Ordering and wholesale
The Obwegeser nasal spine retractor is made by Adas Instruments in our own workshop and sold direct, which is why the price sits where it does against the catalog houses. Order one for a single tray, or in quantity for a hospital list or a distributor line. We do OEM work under your own brand and your own item numbers. Send us a sample and we will hold a run to your pattern rather than ours. Stock items ship from our own workshop. Backorder items take 10 to 12 working days to make. Every instrument carries a three year replacement warranty against manufacturing defects. Production is controlled under an ISO 13485 quality management system.
Frequently asked questions
What is an Obwegeser nasal spine retractor used for?
It pulls back the soft tissue and exposes the anterior nasal spine in surgery on the upper jaw, the Le Fort I osteotomy above all. The forked tip sits over the spine, and the pull holds the upper lip and the base of the nose above the line of the cut while the bone is divided.
Why does the nasal spine retractor have a forked tip?
The nasal spine is a point of bone, and a flat blade slides off a point. The two prongs of the fork sit on either side of it, so the blade stays where it is placed while the assistant pulls upward. The AI Mode answer calls this a V notched saddle blade.
What other names does it go by?
Gemini gives the Obwegeser anterior nasal spine retractor and the Obwegeser premaxillary retractor, after the bone it sits on and the part of the jaw it exposes. Buyers also shorten it to the Obwegeser nasal retractor. All of them mean this pattern.
Should I order the 24 cm or the 22 cm nasal spine retractor?
The 24 cm has the forked tip in our photograph and the longer reach; the 22 cm has a narrow tip and a closer hold. Both are 24 dollars. A team doing Le Fort surgery on adults can start with the 24 cm.
Can it be autoclaved?
Yes. It is one piece of stainless steel with no joint, screw or coating, and it goes through the normal steam cycle with the rest of the tray. Rinse it, brush between the points of the fork, and dry it before it is packed.
Related products and categories
Three more jaw retractors from the same family: the Obwegeser chin retractor, the Obwegeser channel retractor and the Munro ramus retractor. The rest of the range is under maxillofacial instruments, which sits inside our ENT instruments.


Reviews
There are no reviews yet.