What an Obwegeser chin retractor is
The chin is operated on through an incision inside the lower lip. Once the tissue is raised off the bone, the whole soft tissue of the chin has to be held down and forward so the surgeon can see the front of the jaw and its lower border. A long ramus blade is the wrong shape for that; the chin retractor is short, wide and angled to sit over the curve of the chin.
Google AI Mode, read on 3 November 2026, describes the Obwegeser chin retractor as a hand held instrument for maxillofacial, plastic and dental surgery. Its main purpose is to hold the tissue back and expose the mandible and the lower lip, in genioplasty and in reconstruction of the jaw. It describes a deeply curved, right angled blade, often with small prongs at the tip that hook onto the prominence of the chin. It gives a length of about 155 to 160 mm for the pattern; ours is 16 cm.
A buyer who asks for a chin retractor is asking for this pattern: the catalogs that list a chin retractor list the Obwegeser one. Gemini also gives the Obwegeser mentoplasty retractor and the Obwegeser mandibular symphysis retractor as names, and on a genioplasty list it may appear simply as a genioplasty retractor.
Key design features
A pronged tip
In our photograph the working end of the blade splits into short prongs. The prongs hook over the tissue at the chin, so the blade holds the soft tissue in place while the assistant pulls it down and away from the bone.
A flat angled bar
The retractor is one flat bar bent at an angle, with no separate handle and no loop. The angle carries the blade over the curve of the chin while the flat part of the bar lies along the hand. It is a short, solid instrument, made for a firm pull close to the face.
Sixteen centimeters
At 16 cm it is one of the short retractors in this family. The chin is close to the surface, so the extra reach of a 22 or 24 cm instrument would only put the hand further from the work. A short instrument also lets the assistant brace the hand against the patient’s face for a steady pull, which matters while the chin bone is cut and moved.
Made for the front of the jaw
Gemini, read on 3 November 2026, lists the tissue it holds as the lower border of the mandible, the symphysis, the mentalis muscle and the soft tissue of the chin. Those are the parts in front of the bone cut in a genioplasty, and the blade is shaped to hold all of them at once.
Which one to order
The listing carries one size, read on 3 November 2026. Order one per genioplasty tray, and a second if a graft is taken from the chin in the same case as other work.
| What you get | Length | Working end | Price |
|---|---|---|---|
| Obwegeser chin retractor | 16 cm | Angled blade with a pronged tip | 20 dollars |
| Spare for a second tray | 16 cm | The same | 20 dollars |
Where it is used
Gemini, read on 3 November 2026, places it in oral and maxillofacial and facial plastic surgery, on the lower border of the mandible, the symphysis, the mentalis muscle and the soft tissue of the chin.
| Case | What it holds | Why this shape |
|---|---|---|
| Genioplasty | The soft tissue of the chin, down and forward | The prongs hook the tissue over the chin |
| Fracture at the front of the lower jaw | Tissue over the symphysis | Short and firm, close to the face |
| Bone graft taken from the chin | Soft tissue over the graft site | Holds the whole chin tissue at once |
| Chin implant | Tissue over the pocket | Wide enough for the pocket |
What it holds back, and what it must not do
It holds the soft tissue of the chin. It is not made for the ramus or the cheek, and it is not a lever.
| Job | Use the chin retractor? | What to use instead or beside it |
|---|---|---|
| Holding chin tissue in a genioplasty | Yes | This is the job it is made for |
| Holding the lower lip for a short step | Yes | The same blade |
| Holding tissue off the ramus | No | An Obwegeser ramus retractor |
| Holding the cheek and lip along the jaw | No | An Obwegeser soft tissue retractor |
| Levering bone | Never | An elevator |
How it compares with the rest of the family
Ten Obwegeser and Munro jaw retractors make up this family on our site. The working ends are read off each listing’s own photograph, the sizes off the variations, the lengths off the name and the prices off the order form, on 3 November 2026.
| Retractor | Working end, from our photograph | Sizes on the listing | Length | Price |
|---|---|---|---|---|
| Obwegeser third molar | right angled blade with a turned down tip, ring and loop handle | one size | 24 cm | 26 dollars |
| Obwegeser retractor 24 cm | right angled blade, bent up or bent down, ring and loop handle | seven blades, 5 x 16 to 16 x 80 mm | 24 cm | 26 dollars |
| Obwegeser soft tissue 21 cm | wider right angled blade, ring and loop handle | three blades, 11 x 40 to 16 x 80 mm | 21 cm | 26 dollars |
| Obwegeser ramus 24 cm | right angled blade with a notched tip, ring and loop handle | 11/15 x 70 or 12/22 x 70 mm | 24 cm | 26 dollars |
| Obwegeser ramus 22 cm | right angled blade with a notched tip, ring and loop handle | one size | 22 cm | 26 dollars |
| Obwegeser nasal spine 22 cm | narrow right angled blade, ring and loop handle | one size | 22 cm | 24 dollars |
| Obwegeser nasal spine 24 cm | right angled blade with a forked tip, ring and loop handle | one size | 24 cm | 24 dollars |
| Obwegeser chin (this page) | flat angled bar with a pronged tip | one size | 16 cm | 20 dollars |
| Obwegeser channel | flat bar, slim rounded end and a curved channel hook | 8 or 10 mm | 16 cm | 14 dollars |
| Munro ramus | broad curved blade on a solid hooked handle | four blades, 20 to 35 x 80 mm | 16 cm | 28 dollars |
Materials and finish
Every Obwegeser chin retractor we make is formed from high quality medical grade stainless steel. The steel itself is made to a German specification. We do not publish a grade number.
The finish is plain steel. The whole retractor is one flat piece with no joint, no ring and no loop. The prongs are the part that meets the tissue, so look at their tips before each case.
Caring for it
Rinse it as soon as the case ends, before blood dries between the prongs. Brush between the prongs from both sides and along the bend. Dry it, steam sterilize it on the normal instrument cycle, and look at the prongs under a light before it goes back on the tray. Set aside one with a bent prong rather than bend it back by hand.
Ordering and wholesale
The Obwegeser chin retractor is made by Adas Instruments in our own workshop and sold direct, which is why the price sits where it does against the catalog houses. Order one for a single tray, or in quantity for a hospital list or a distributor line. We do OEM work under your own brand and your own item numbers. Send us a sample and we will hold a run to your pattern rather than ours. Stock items ship from our own workshop. Backorder items take 10 to 12 working days to make. Every instrument carries a three year replacement warranty against manufacturing defects. Production is controlled under an ISO 13485 quality management system.
Frequently asked questions
What is a chin retractor used for?
It holds the soft tissue of the chin and the lower lip back from the front of the lower jaw. Its main use is genioplasty, the reshaping of the chin, and it is also used for fractures at the front of the jaw, bone grafts taken from the chin and chin implants.
What is the Obwegeser chin retractor called on other lists?
Gemini gives the Obwegeser mentoplasty retractor and the Obwegeser mandibular symphysis retractor, after the operation and the bone it is used on. On a genioplasty list it may simply be called a genioplasty retractor, and buyers may ask for it as a chin retractor.
How many prongs does the chin retractor have?
Ours has a pronged tip, as our photograph shows. The AI Mode answer describes small prongs at the tip; we do not state a count we have not checked on the instrument. If the number matters for your list, write to us and we will send a close photograph.
How is the Obwegeser chin retractor different from the ramus retractor?
The chin retractor is short, at 16 cm, with a pronged tip for the curve of the chin. The ramus retractor is 22 or 24 cm with a notched tip for the edge of the ramus at the back of the jaw. Both are in the family table.
Can it be autoclaved?
Yes. It is one piece of stainless steel with no joint, screw or coating, and it goes through the normal steam cycle with the rest of the tray. Rinse it and brush between the prongs first, and dry it before it is packed.
Related products and categories
Three more jaw retractors from the same family: the Obwegeser channel retractor, the Munro ramus retractor and the Obwegeser third molar retractor. The rest of the range is under maxillofacial instruments, which sits inside our ENT instruments.


Reviews
There are no reviews yet.