What an Obwegeser nasal spine retractor 22 cm is
When the upper jaw is cut free in a Le Fort I osteotomy, the cut runs just below the nose. The upper lip, the base of the nose and the septum all sit in front of it, and they have to be held up and away while the bone is cut. Obwegeser nasal spine retractors are the narrow blades made to do that at the middle of the face.
Google AI Mode, read on 3 November 2026, answers the query for the obwegeser nasal spine retractor 22cm by calling it a maxillofacial instrument made to isolate, pull back and steady the soft tissue round the anterior nasal spine. It names rhinoplasty, septoplasty and reconstruction of the upper jaw. It says the 22 cm length gives depth and leverage while the assistant’s hands stay out of the surgeon’s line of sight.
Gemini gives the Obwegeser anterior nasal spine retractor as another name, so a buyer may search for an anterior nasal spine retractor without the eponym. The case it is ordered for is the Le Fort I, so it also turns up as a le fort retractor on surgical lists. The 24 cm version, with a forked tip, is on its own listing.
Key design features
A narrow blade at a right angle
In our photograph the blade is narrow and turned at a right angle to a slim shaft, with a small working tip. A narrow blade fits the small space at the base of the nose without crowding the cut on either side of it.
Twenty two centimeters
At 22 cm it is the shorter of our two nasal spine retractors. It reaches the base of the nose from below the chin line with the hand clear of the face, and it is easier to hold close and still than the 24 cm on a smaller patient.
A ring and a loop
A ring sits on the shaft above an open loop handle. The loop takes the whole hand for the steady upward pull a Le Fort cut needs, and a finger through the ring gives a lighter hold while the blade is placed.
Made for the middle of the face
The AI Mode answer describes nasal spine blades that sit over the bony spine so they do not slide. On a narrow blade the hold comes from placing the tip against the spine and pulling upward, which keeps the lip and the base of the nose above the line of the cut.
Which one to order
The listing carries one size, read on 3 November 2026. For a longer reach and a forked tip, see the 24 cm version.
| What you get | Length | Working end | Price |
|---|---|---|---|
| Obwegeser nasal spine retractor, 22 cm | 22 cm | Narrow right angled blade | 24 dollars |
| Obwegeser nasal spine retractor, 24 cm | 24 cm | Right angled blade, forked tip | 24 dollars |
Where it is used
Gemini, read on 3 November 2026, places the 22 cm in oral and maxillofacial surgery, ENT and facial plastic surgery, on the anterior nasal spine, the mucoperiosteum of the premaxilla and the border of the septum.
| Case | What it holds | Why this blade |
|---|---|---|
| Le Fort I osteotomy | Lip and base of the nose above the cut | Narrow, for the middle of the face |
| Septoplasty through the mouth | Soft tissue at the base of the septum | Holds clear of the septum |
| Repair of the upper jaw | Tissue over the front of the maxilla | Short reach, close control |
| Removal of bone at the nasal spine | Lip and nose | One hand holds, one is free |
What it holds back, and what it must not do
It holds soft tissue at the base of the nose. It is not made for the cheek or the lower jaw.
| Job | Use the 22 cm nasal spine retractor? | What to use instead or beside it |
|---|---|---|
| Holding tissue at the nasal spine | Yes | This is the job it is made for |
| A deeper hold, forked over the spine | Beside it | The 24 cm nasal spine retractor |
| Holding the cheek over the maxilla | No | An Obwegeser soft tissue retractor |
| Work inside the nose | No | A nasal speculum |
| Levering bone | Never | An elevator |
How it compares with the rest of the family
Ten Obwegeser and Munro jaw retractors make up this family on our site. The working ends are read off each listing’s own photograph, the sizes off the variations, the lengths off the name and the prices off the order form, on 3 November 2026.
| Retractor | Working end, from our photograph | Sizes on the listing | Length | Price |
|---|---|---|---|---|
| Obwegeser third molar | right angled blade with a turned down tip, ring and loop handle | one size | 24 cm | 26 dollars |
| Obwegeser retractor 24 cm | right angled blade, bent up or bent down, ring and loop handle | seven blades, 5 x 16 to 16 x 80 mm | 24 cm | 26 dollars |
| Obwegeser soft tissue 21 cm | wider right angled blade, ring and loop handle | three blades, 11 x 40 to 16 x 80 mm | 21 cm | 26 dollars |
| Obwegeser ramus 24 cm | right angled blade with a notched tip, ring and loop handle | 11/15 x 70 or 12/22 x 70 mm | 24 cm | 26 dollars |
| Obwegeser ramus 22 cm | right angled blade with a notched tip, ring and loop handle | one size | 22 cm | 26 dollars |
| Obwegeser nasal spine 22 cm (this page) | narrow right angled blade, ring and loop handle | one size | 22 cm | 24 dollars |
| Obwegeser nasal spine 24 cm | right angled blade with a forked tip, ring and loop handle | one size | 24 cm | 24 dollars |
| Obwegeser chin | flat angled bar with a pronged tip | one size | 16 cm | 20 dollars |
| Obwegeser channel | flat bar, slim rounded end and a curved channel hook | 8 or 10 mm | 16 cm | 14 dollars |
| Munro ramus | broad curved blade on a solid hooked handle | four blades, 20 to 35 x 80 mm | 16 cm | 28 dollars |
Materials and finish
Every Obwegeser nasal spine retractor we make is formed from high quality medical grade stainless steel. The steel itself is made to a German specification. We do not publish a grade number.
The finish is plain steel. Blade, shaft, ring and handle are one piece, with no joint at the bend. The tip is small, so look at it under a light before each case.
Caring for it
Rinse it as soon as the case ends. Brush both faces of the blade, the tip and the inside of the loop handle, where a cloth does not reach. Dry it, steam sterilize it on the normal instrument cycle, and look at the angle before it goes back on the tray. A blade that has been bent off its right angle will not hold the lip above the cut, so set it aside rather than bend it back by hand.
Ordering and wholesale
The Obwegeser nasal spine retractor is made by Adas Instruments in our own workshop and sold direct, which is why the price sits where it does against the catalog houses. Order one for a single tray, or in quantity for a hospital list or a distributor line. We do OEM work under your own brand and your own item numbers. Send us a sample and we will hold a run to your pattern rather than ours. Stock items ship from our own workshop. Backorder items take 10 to 12 working days to make. Every instrument carries a three year replacement warranty against manufacturing defects. Production is controlled under an ISO 13485 quality management system.
Frequently asked questions
What is a nasal spine retractor used for?
It holds back and steadies the soft tissue round the anterior nasal spine, the point of bone at the base of the nose. It is used in Le Fort I osteotomies of the upper jaw, septoplasty through the mouth and repair of the front of the maxilla, to keep the lip and the base of the nose above the line of the cut.
Should I order the 22 cm or the 24 cm nasal spine retractor?
Gemini, read on 3 November 2026, gives the 24 cm more reach and leverage in deep tissue, and the 22 cm standard access. Ours differ in the tip too: the 24 cm has a forked tip in our photograph, and the 22 cm a narrow one. Both are 24 dollars.
Is it the same as an anterior nasal spine retractor?
Yes. Gemini gives the Obwegeser anterior nasal spine retractor as another catalog name, and the anterior nasal spine is the bone it is placed against. Some lists also call it a premaxillary retractor, after the front part of the upper jaw it exposes.
Why is it called a Le Fort retractor on some lists?
Because the Le Fort I osteotomy of the upper jaw is the case it is ordered for. Both AI answers read on 3 November 2026 name it first. The cut runs just below the nose, and this blade holds the lip and the base of the nose above it.
Can the nasal spine retractor be autoclaved?
Yes. Like our other obwegeser nasal spine retractors, it is one piece of stainless steel with no joint, screw or coating, and it goes through the normal steam cycle with the rest of the tray. Rinse it, brush the tip and the loop, and dry it before it is packed.
Related products and categories
Three more jaw retractors from the same family: the Obwegeser nasal spine retractor, 24 cm, the Obwegeser chin retractor and the Obwegeser channel retractor. The rest of the range is under maxillofacial instruments, which sits inside our ENT instruments.


Reviews
There are no reviews yet.