What an Obwegeser ramus retractor 24 cm is
The ramus is the upright back part of the lower jaw. To cut it in a sagittal split, the surgeon needs the soft tissue on its inner and outer side held right back, and the retractor has to stay put on a smooth bone edge while the saw works. A plain blade slides; a notched one sits, and the obwegeser ramus retractor 24cm has the notched one.
Google AI Mode, read on 3 November 2026, describes the 24 cm Obwegeser ramus retractor as an orthognathic instrument for deep retraction at the back of the ramus during sagittal split osteotomies and reconstructive jaw surgery. It describes an L shaped, V notched or concave blade that grips the bone border or the sigmoid notch, and a long handle that lets the assistant hold from outside the field. Its blade widths of 11 to 22 mm match our two sizes.
Gemini gives the Obwegeser notched ramus retractor as a catalog name for this blade, and buyers also look for a notched ramus retractor, a forked ramus retractor or an obwegeser mandibular retractor. The shorter 22 cm version, with one blade, is on its own listing.
Key design features
A notched tip
In our photograph the tip of the blade is notched and turns down. The notch sits over the bone edge and stops the blade sliding sideways, which Gemini gives as the difference from a smooth blade that holds only by friction. In a sagittal split the blade stays on that edge for the whole of the cut, so a seat that does not creep is what the assistant needs most from it.
Two blades, both 70 mm deep
The listing carries two blades. Both are 70 mm deep; the figures before the depth give the width at two points, 11 and 15 mm on one, 12 and 22 mm on the other. The 12/22 blade is the wider hold, for a larger patient or a broader exposure.
Twenty four centimeters
At 24 cm the retractor reaches the back of the ramus from the front of the mouth, with the hand well outside the lips. That leaves the space in front of the mouth for the saw, the suction and the light. On a large patient or a long jaw the extra two centimeters over the 22 cm version are the difference between reaching the back of the ramus and stopping short of it.
A ring and a loop
A ring sits on the shaft above an open loop handle. The loop takes the whole hand for the steady pull a split needs, and a finger through the ring gives a lighter hold while the blade is placed.
Which blade to order
The two variations on the listing, read on 3 November 2026. Both are 24 cm and both cost the same.
| Blade on the listing | Width | Depth | Price |
|---|---|---|---|
| 11/15 x 70 mm | 11 mm and 15 mm | 70 mm | 26 dollars |
| 12/22 x 70 mm | 12 mm and 22 mm | 70 mm | 26 dollars |
Where it is used
Gemini, read on 3 November 2026, places the notched 24 cm ramus retractor in oral and maxillofacial and orthognathic surgery, on the front edge of the ramus, the coronoid process and the attachment of the temporalis.
| Case | What it holds | Blade to start with |
|---|---|---|
| Sagittal split of the lower jaw | Soft tissue off the ramus | 12/22 x 70 mm |
| Coronoid process surgery | Tissue over the coronoid | 11/15 x 70 mm |
| Reconstruction of the ramus | The flap over the bone | By the size of the jaw |
| Plating a ramus fracture | Soft tissue at the fracture | By the site |
What it holds back, and what it must not do
It holds tissue off the ramus. It does not hold the cheek at the front of the mouth, and it is not a lever.
| Job | Use the 24 cm ramus retractor? | What to use instead or beside it |
|---|---|---|
| Holding tissue off the ramus | Yes | This is the job it is made for |
| Sitting on the lower border during a split | No | An Obwegeser channel retractor |
| Holding the lateral side of the vertical ramus | Beside it | A Munro ramus retractor |
| Holding the cheek and lip | No | An Obwegeser soft tissue retractor |
| Levering bone | Never | An elevator; the blade bends under that load |
How it compares with the rest of the family
Ten Obwegeser and Munro jaw retractors make up this family on our site. The working ends are read off each listing’s own photograph, the sizes off the variations, the lengths off the name and the prices off the order form, on 3 November 2026.
| Retractor | Working end, from our photograph | Sizes on the listing | Length | Price |
|---|---|---|---|---|
| Obwegeser third molar | right angled blade with a turned down tip, ring and loop handle | one size | 24 cm | 26 dollars |
| Obwegeser retractor 24 cm | right angled blade, bent up or bent down, ring and loop handle | seven blades, 5 x 16 to 16 x 80 mm | 24 cm | 26 dollars |
| Obwegeser soft tissue 21 cm | wider right angled blade, ring and loop handle | three blades, 11 x 40 to 16 x 80 mm | 21 cm | 26 dollars |
| Obwegeser ramus 24 cm (this page) | right angled blade with a notched tip, ring and loop handle | 11/15 x 70 or 12/22 x 70 mm | 24 cm | 26 dollars |
| Obwegeser ramus 22 cm | right angled blade with a notched tip, ring and loop handle | one size | 22 cm | 26 dollars |
| Obwegeser nasal spine 22 cm | narrow right angled blade, ring and loop handle | one size | 22 cm | 24 dollars |
| Obwegeser nasal spine 24 cm | right angled blade with a forked tip, ring and loop handle | one size | 24 cm | 24 dollars |
| Obwegeser chin | flat angled bar with a pronged tip | one size | 16 cm | 20 dollars |
| Obwegeser channel | flat bar, slim rounded end and a curved channel hook | 8 or 10 mm | 16 cm | 14 dollars |
| Munro ramus | broad curved blade on a solid hooked handle | four blades, 20 to 35 x 80 mm | 16 cm | 28 dollars |
Materials and finish
Every Obwegeser ramus retractor we make is formed from high quality medical grade stainless steel. The steel itself is made to a German specification. We do not publish a grade number.
The finish is plain steel. Blade, shaft, ring and handle are one piece, so there is no joint at the bend. The notch is the part that meets bone; look at its edges before each case.
Caring for it
Rinse it as soon as the case ends, while bone dust is still wet in the notch. Brush the notch from both sides, both faces of the blade and the inside of the loop handle. Dry it, steam sterilize it on the normal instrument cycle, and look at the notch and the angle before it goes back on the tray. Set aside one whose notch is bent or whose blade has opened, rather than bend it back by hand.
Ordering and wholesale
The Obwegeser ramus retractor is made by Adas Instruments in our own workshop and sold direct, which is why the price sits where it does against the catalog houses. Order one for a single tray, or in quantity for a hospital list or a distributor line. We do OEM work under your own brand and your own item numbers. Send us a sample and we will hold a run to your pattern rather than ours. Stock items ship from our own workshop. Backorder items take 10 to 12 working days to make. Every instrument carries a three year replacement warranty against manufacturing defects. Production is controlled under an ISO 13485 quality management system.
Frequently asked questions
What is a 24 cm ramus retractor used for?
The obwegeser ramus retractor 24cm holds the soft tissue back from the posterior part of the mandibular ramus during sagittal split osteotomies, coronoid surgery, ramus reconstruction and the plating of ramus fractures. The notched tip sits on the bone edge, and the 24 cm length lets the assistant hold from outside the mouth.
What is a notched ramus retractor?
It is a ramus retractor whose blade has a notch cut into the tip. The notch seats over the bone edge so the blade does not slide sideways while the saw works. Ours is the 24 cm Obwegeser version with a notched tip that turns down.
Which ramus retractor blade should I order, 11/15 or 12/22?
Both blades are 70 mm deep. The 11/15 x 70 mm is the narrower one, for a smaller jaw or the coronoid area. The 12/22 x 70 mm is wider and holds more tissue in a sagittal split. Both are 26 dollars, and a team doing splits on both sides can keep one of each.
How is the 24 cm different from the 22 cm ramus retractor?
The 24 cm is longer and comes in two blade sizes; the 22 cm is one size and a little shorter. Both have the notched tip in our photographs and both are 26 dollars. Order by the reach you need and by whether you want a choice of blade.
Can it be autoclaved?
Yes. It is one piece of stainless steel with no joint, screw or coating, and it goes through the normal steam cycle with the rest of the tray. Rinse it and brush the notch first, and dry it before it is packed.
Related products and categories
Three more jaw retractors from the same family: the Obwegeser ramus retractor, 22 cm, the Obwegeser nasal spine retractor, 22 cm and the Obwegeser nasal spine retractor, 24 cm. The rest of the range is under maxillofacial instruments, which sits inside our ENT instruments.


Reviews
There are no reviews yet.